A surveyor in a respirator putting a sample of loft material into a sealed bag

Surrey · England

Artex Removal for Albury Heath

Artex removal in Albury Heath, from older homes to workplaces. Every job is quoted in writing.

  • Ceilings due for plastering or skimming
  • Ceilings due for rewiring or new downlights
  • Coatings already disturbed

Ask for a quote Call 07833 053 749

Artex removal for Albury Heath

How artex removal works in Albury Heath

If your renovation in Albury Heath involves textured ceilings, get them tested before electricians or plasterers start. From coatings scraped during DIY and coatings damaged by leaks, we cover coated ceiling roses, swirl patterns and textured walls and more.

In a village like Albury Heath, textured coatings turn up in cottages and later homes alike. Paperwork is part of every job, because buyers, landlords and builders often ask for it.

Where
Albury Heath (GU5)
Area hub
Surrey
Covers
Testing and removal of textured coatings
You receive
Lab result and consignment note
Quotes
Quoted individually, in writing
Call
07833 053 749
Page updated
26 October 2026
A sealed sample bag held up by a surveyor

A closer look at the materials

Patched areas

Patches may be newer material.

Coated plasterboard

The coating sits on plasterboard or plaster. Sometimes it’s simpler to remove the boards whole.

Typical Artex jobs in Albury Heath

Renovations disturb coatings: sanding, dry scraping or drilling.

In older properties, we often see:

  • Ceilings due for plastering or skimming
  • Textured walls before a refit
  • Ceilings before downlights go in
  • Coatings already disturbed

For a school such as Shere CofE Aided Infant School, the duty holder’s records should show any coatings.

What your quote should include

  • What category of work it is
  • What you’ll receive afterwards: a report, results or waste paperwork
  • If the price includes VAT
  • The scope of the job, in writing

How to choose an asbestos contractor

Landlords, managing agents and employers

Community buildings count as non-domestic premises, so whoever runs them has a duty to manage asbestos.

Void periods are a good time for asbestos work, while the property is empty.

Artex removal around Albury Heath

Albury Heath is about 5 miles south-east of Guildford, in Surrey. In Albury Heath, we hear from homeowners, landlords and businesses about all kinds of jobs. Albury Heath is one of 395 towns and villages in Surrey we cover.

For rented flats close to Gomshall station, coatings can be tested while the flat is empty. If your home is one of the older properties in Albury Heath, near Old St Peter and St Paul's Church or elsewhere, textured ceilings may date from an earlier renovation. Albury Heath is within about a mile of the Surrey Hills National Landscape; cottages and farmhouses nearby can have textured coatings too.

We carry out Artex jobs all over GU5 and the streets around it. Local streets include Park Road and Heath Lane; we cover every one. Neighbouring places we cover include Little London (1 mile south-east), Shere (1 mile north-east), Albury (1 mile north-west), Gomshall (1 mile east) and Hoe (2 miles east). Further out, we also cover Guildford (5 miles north-west), Woking (8 miles north-west), Camberley (14 miles north-west), Epsom (12 miles north-east), Horley (14 miles east) and Redhill (14 miles east).

Well-known places in the area include St. Luke’s Hospital (3.9 miles north-west) and Shere Museum (0.9 miles north-east). The countryside around Albury Heath includes St Martha's Hill and Combe Bottom.

  • Pubs nearby include King William IV Public House (less than half a mile south-east)
Map of Albury Heath © OpenStreetMap contributors

After we have finished in Albury Heath

Tell your plasterer and electrician what was done.

Going forward:

  • Plan where you will stay or work while rooms are closed off
  • Photos help us quote
  • Tell us which rooms and roughly how big they are
  • File the test result and waste note

Things not to do

Test before the builders arrive.

Do not sand, scrape dry or wire-brush a textured coating before it’s been tested.

What affects the price in Albury Heath

What drives the price:

  • Access: height, lofts, steps and space
  • Licensed or non-licensed
  • How much there is
  • Disposal costs

When comparing quotes, check what’s included: scope, method, waste disposal and paperwork.

What to photograph

The most useful photos are:

  • A clear close-up
  • Approximate dimensions
  • Damaged areas
  • The parking area

Not sure what you need? Send photos through our quote form, or phone 07833 053 749 and describe the problem, and we’ll advise.

Which option is right?

A low price may mean shortcuts, which releases fibres. Ask about the method and the waste. The cost of Artex removal depends on the job: the materials involved, how much there is, access and paperwork. Every quote is individual.

Why choose us

  • Honest advice, even when the answer is to leave it
  • Paperwork you can show your buyer, landlord or builder
  • Lab analysis by an accredited laboratory
  • Work planned to HSE guidance and the regulations

Take a look at our prices page or the cost guide.

Good to know

To be clear about the scope:

  • Larger-scale steam or gel removal must be notified before it starts, which affects the start date
  • Untested coatings are tested first, since a negative result changes everything
  • We need the room cleared

If in doubt, ask: we will recommend a test, a survey or removal before booking.

Materials in Albury Heath

  • Coated plasterboard
  • Textured walls
  • Swirl and stipple patterns
  • Patched or painted coatings
  • Artex ceilings
  • Ceiling roses and cornices (coated)

Service details

FAQs for Albury Heath

Do you work on properties in the Surrey Hills National Landscape?

Yes, the same rules apply there, though access to rural buildings may need planning.

Is the Artex in my Albury Heath home asbestos?

Some older coatings do, and many don’t. Only a test will tell you.

Do you give written quotes?

Yes, always, including whether VAT is included.

Can I plaster over Artex that contains asbestos?

You can, if it’s intact: skimming or boarding over avoids disturbing it. Never sand it beforehand, and record its location.

Can I sand my Artex ceiling smooth?

Only once you know it’s clear. Sanding or dry scraping an asbestos coating releases fibres.

When can you start?

It depends on the job and our diary. You will get available dates with the quote.

Do you work on commercial premises?

Yes: shops, offices, industrial units and community buildings as well as homes. The duty holder should be able to share the asbestos register.

Does asbestos always have to come out?

No. Material in good condition that won’t be disturbed can often be left and managed. Keep a record and check its condition.

How we work

We finish by cleaning the room thoroughly. The work area is kept clear while we’re working, so arrange for pets and children to be elsewhere.

  1. Send photos of the textured surfaces
  2. We arrange testing
  3. We talk through the options
  4. We remove it safely if that is what you choose
  5. The waste goes to a permitted site with a consignment note

Preparing for the visit

  • Let neighbours know if the work is near them
  • Have any previous surveys or test results ready
  • Tell us about anything that is already damaged

Getting a price

Every job is quoted in writing. Just use our quote form or call 07833 053 749 with the details.

Tell us what you need

Helpful guides

  • Survey or test first when it isn’t clear what a material is
  • Done to the regulations: HSE guidance and CAR 2012
  • Written paperwork: reports, results and waste consignment notes
  • Waste sealed and labelled, then taken to a permitted site

How it works · Licensed or non-licensed? · Get a quote