A surveyor in a respirator putting a sample of loft material into a sealed bag

Hampshire · England

Artex Removal for Anmore

Buildings in Anmore built or refurbished before 2000 can contain asbestos. Our artex removal service covers testing and removal of Artex and textured coatings.

  • Flaking textured ceilings
  • Coatings damaged by DIY
  • Walls before tiling

Get a quote Call 07833 053 749

Artex removal in Anmore

How artex removal works in Anmore

Many Artex ceilings contain no asbestos at all. Testing a sample tells you, so work can go ahead normally if it’s negative. People often contact us about coatings in the way of electrical work and ceilings due to be knocked through or removed, including stipple finishes, coated plasterboard and coated ceiling roses.

Village homes like those in Anmore have often been altered several times, so ceilings may have been coated during an earlier renovation. We identify materials before planning removal, because the method depends on what the material is.

Location
Anmore (PO7)
Region
Hampshire
Service
Textured ceilings and walls
Paperwork
Result and waste note
Quotes
A written quote before work starts
Phone
07833 053 749
Page updated
26 October 2026
Workers in respirators bagging waste

Common reasons for Artex jobs in Anmore

Many electricians and plasterers ask for a test result before working on textured ceilings.

Typical jobs in Anmore include:

  • Structural work through coated ceilings
  • Coatings damaged by DIY
  • Coatings in the way of electrical work
  • Coatings damaged by leaks

If your home is one of the older properties in Anmore, near The Mead End or elsewhere, textured ceilings may date from an earlier renovation.

Comparing quotes

  • Whether the work is licensed, notifiable non-licensed or non-licensed
  • Whether VAT is included
  • That licensed work will be done by an HSE-licensed contractor
  • What you’ll receive afterwards: a report, results or waste paperwork

What to check before you book

Artex removal around Anmore

Anmore is about 1 mile north-west of Waterlooville, in Hampshire. Anmore is part of the area we cover, from older terraces and semis to flats, workplaces and outbuildings. Anmore is one of 683 places in Hampshire where we work. Our area stretches from Anmore to Southampton (about 15 miles away).

If you’re refurbishing flats near Bedhampton station, a void period is a good time to deal with textured ceilings. Non-domestic buildings like Denmead Infant School should already have records of any textured coatings, before decorators start.

We carry out Artex jobs all over the PO7 postcode area and the streets around it. Whether your property is on Anmore Road and Soake Road or a nearby road, the process is the same. If your property is just outside Anmore, we also cover Wecock Farm (1 mile east), Denmead (1 mile west), Lovedean (1 mile north-east), Horndean (2 miles east) and Anthill Common (2 miles west). Larger places within reach include Gosport (8 miles south-west), Havant (4 miles south-east), Eastleigh (14 miles west), Fareham (7 miles south-west), Hedge End (11 miles west) and Petersfield (9 miles north-east).

Other landmarks nearby include Queen Alexandra Hospital (3.6 miles south) and Clanfield Earthwork (4.3 miles north-east). Green spaces nearby include St Clair's Meadow and Windmill Hill.

  • Schools near Anmore include The Cowplain School (1.2 miles south-east)
  • Pubs nearby include The Mead End pub (0.6 miles south-west)
Map of Anmore © OpenStreetMap contributors

After we’ve finished in Anmore

We clean the room and dispose of the waste legally, with a consignment note.

Keeping things safe:

  • Keep pets away
  • Plan around the closed rooms
  • Keep the results and paperwork
  • Each different coating needs testing

Don’ts

Plan testing before the renovation starts.

Don’t use a steamer or chemical stripper on an untested coating.

Options to consider in Anmore

A low price may mean shortcuts, which releases fibres. Ask how the coating will be removed and where the waste goes. Doing several things in one visit can help, such as testing several materials at once.

Why choose us

  • Paperwork you can show your buyer, landlord or builder
  • Clear advice on your options
  • Written quotes that say what’s included
  • Samples analysed by an accredited laboratory

Take a look at how we price jobs and the cost guide.

DIY and asbestos

Fragile roofs are a serious falls risk, as well as an asbestos risk, so never climb onto one.

Home testing kits exist, but you have to disturb the material to use one. HSE advises that samples are best taken by a competent person.

Materials we deal with

Artex ceilings

Patterned ceilings are the classic example.

Ceiling roses and cornices

Decorative mouldings are sometimes coated too.

How it works

For board removal, we take the boards down in whole pieces. Unexpected finds are discussed with you first before carrying on.

  1. Describe the rooms and coatings
  2. We test the coating if it hasn’t been tested
  3. If it contains asbestos, we agree the method and send a quote
  4. We seal the room and remove the coating with wet methods
  5. We clean up and dispose of the waste legally

Preparing for the visit

  • Move things out of the way carefully
  • Keep away from the material in the meantime
  • Make sure pets and children are elsewhere

Getting a price

We quote each job individually, because no two are the same. To start, send photos through our quote form, or phone 07833 053 749.

Ask for a quote

Helpful guides

Anmore questions

Do you cover Anmore from London?

We cover Anmore, about 58 miles from central London.

Do you work near Bedhampton station?

Yes, we cover Anmore and the area towards Bedhampton station, about 4 miles south-east.

Can I put asbestos in a skip?

Never: skips and household bins can’t take asbestos. It has to go to a site that accepts it, with the right paperwork.

Is my textured ceiling in Anmore asbestos?

Not necessarily: many coatings are asbestos-free. A sample test tells you which you have.

Could my home contain asbestos?

You can’t tell by eye. A sample analysed in a laboratory is the reliable way to find out, especially in buildings from before 2000.

Do you need a licence to remove Artex?

HSE’s code of practice says it will not normally be licensable. Larger steam or gel jobs must be notified first.

Can you help with a shop or office?

We do, alongside homes. Non-domestic premises have a duty holder who should hold an asbestos register.

How much does Artex removal cost in Anmore?

It depends on the area, the number of rooms, the method and the waste. We quote once we know what it contains.

The scope of Artex removal

We’re upfront about what’s included:

  • Larger-scale steam or gel removal must be notified before it starts, so allow time
  • We test before removal, since a negative result changes everything
  • Plastering and making good are typically separate jobs

Not sure what you need? Send us photos and we will tell you honestly.

Materials in Anmore

  • Ceiling roses and cornices (coated)
  • Swirl and stipple patterns
  • Artex ceilings
  • Patched or painted coatings
  • Coated plasterboard
  • Textured walls

More about this service

For businesses and landlords in Anmore

Before contractors start, they need to know about any asbestos. HSE’s campaigns stress this point to building owners and trades alike.

Landlords of garage blocks and outbuildings should know what the roofs are made of, before anyone carries out repairs.

  • Survey or test first when it isn’t clear what a material is
  • Work planned to the Control of Asbestos Regulations 2012 and HSE guidance
  • Everything in writing: quotes, reports, results and waste notes
  • Legal disposal at a permitted site, with a consignment note

How it works · Licensed or non-licensed? · Get a quote