East Sussex · England
Asbestos Artex Removal in Arlington, East Sussex
Worried about asbestos in Arlington? Our service covers removal of textured ceilings and walls, with clear advice at each step.
- Ceilings due to be knocked through or removed
- Damaged or cracked coatings
- Ceilings before skimming
Artex removal in Arlington
About our artex removal in Arlington
Removing an asbestos textured coating means sealing off the room, keeping the coating wet and never sanding or scraping it dry, with the waste bagged and taken to a permitted site. From landlord refurbishments and textured walls before a refit, we cover coated ceiling roses, coated plasterboard and textured walls and more.
Village homes like those in Arlington have often been altered several times, so ceilings may have been coated during an earlier renovation. We work to HSE guidance on every job, large or small.
- Where
- Arlington (BN26)
- County
- East Sussex
- Covers
- Textured ceilings and walls
- Paperwork
- Test result and waste paperwork
- Quotes
- A written quote before work starts
- Call
- 07833 053 749
- Page updated
- 26 October 2026
Responsibilities for owners
If you manage or own a block in Arlington, the asbestos register for common parts should be kept up to date and shared with contractors, and condition checked regularly.
If you run a business from older premises in Arlington, you should have an asbestos register and management plan, and you must tell contractors what’s there.
Towns and villages near Arlington
What else we do in Arlington
Weighing up your options
A test before removal can save money: if the coating is clear, ordinary methods can be used. Our quotes are clear about VAT.
Why us?
- Houses, flats and business premises
- London, Kent, Surrey, Sussex and beyond
- Lab analysis by an accredited laboratory
- Plain-English advice, including when to leave things alone
Take a look at how we quote or the cost guide.
Questions from Arlington
Do you cover small places like Arlington?
Yes. We cover villages and hamlets as well as towns. Just tell us how to reach the property.
Do you cover Arlington from London?
We cover Arlington, about 47 miles from central London.
Do you need a licence to remove Artex?
Normally not: HSE’s code of practice says textured coating work is not normally licensable, but larger-scale steam or gel removal must be notified first.
What if the weather’s bad?
It depends on the job: indoor work carries on, while outdoor roof work may be postponed in strong wind or heavy rain.
Is it better to remove the coating or the ceiling?
It depends on the room and the condition of the ceiling. We’ll explain the options.
Is it OK to scrape off Artex?
Not before testing. If it contains asbestos, sanding releases fibres.
How can I get a price?
Just fill in the enquiry form or give us a call on 07833 053 749. Include the postcode, a description and photos.
Can I just skim over it?
Covering it is an option if it’s intact, but never sand it first, and keep a record.
Artex removal around Arlington
Arlington is about 3 miles south-west of Hailsham, in East Sussex. Homes, landlords and businesses in Arlington contact us for Artex jobs. We work in all 289 towns and villages in East Sussex, from the larger towns to small villages. Our area stretches from Arlington to Brighton (14 miles away).
If your home is one of the older properties in Arlington, near The Parish Church of St Pancras or elsewhere, textured ceilings may date from an earlier renovation. Parts of the South Downs National Park are within about 4 miles of Arlington; cottages and farmhouses nearby can have textured coatings too.
Here we cover the BN26 postcode area, and your Artex job can be anywhere in it. For properties just outside Arlington, we cover Wickstreet (1 mile north), Berwick (1 mile west), Wilmington (2 miles south), Selmeston (2 miles west) and Milton Street (2 miles south). Further out, we also cover Eastbourne (6 miles south-east), Bexhill-on-Sea (12 miles east), Seaford (6 miles south-west), Lewes (8 miles west), Hailsham (3 miles north-east) and Crowborough (14 miles north).
A little further out are Agricultural Museum (2 miles south) and Hellingly Hospital Railway (4.1 miles north-east). The countryside around Arlington includes Combe Hill.
- Local pubs include Yew Tree Inn (less than half a mile west)
Afterwards
File the result and the paperwork.
After we have finished:
- Send photos of the coatings
- Plan around the closed rooms
- Empty the rooms in advance
- Keep pets out of the work area
What to avoid
Don’t try DIY removal products on untested coatings.
Do not drill or cut into textured ceilings until you know what they contain.
What’s included, and what isn’t
We are upfront about what’s included:
- We need the room cleared
- Other materials may need their own approach
- Larger-scale steam or gel removal must be notified before it starts, so allow time
If you are unsure, describe the job and send photos, and we will advise.
Materials in Arlington
- Patched or painted coatings
- Coated plasterboard
- Swirl and stipple patterns
- Ceiling roses and cornices (coated)
- Artex ceilings
- Textured walls
A closer look at the materials
Textured walls
Walls are treated like ceilings.
Painted coatings
The sample includes the coating itself.
Prices and what affects them
Quotes vary because of:
- Travel and parking
- The category of work
- The quantity or area
- Access to the area
Doing several things in one visit can help, such as testing several materials at once.
What to photograph
Photo tips:
- Any damage, cracks or broken pieces
- Street parking nearby
- The route in: gates, steps, stairs or the loft hatch
- An overall view
The quickest way to a quote is to send photos and the postcode: just fill in the enquiry form or give us a call on 07833 053 749.
Common reasons for Artex jobs in Arlington
People used Artex to cover cracks and uneven ceilings, and some included a little chrysotile.
In older properties, we often see:
- Extensions that cut into ceilings
- Rented homes refurbished between tenants
- Damaged or cracked coatings
- Coatings damaged by DIY
If you’re refurbishing a rental near Berwick (Sussex) station, a void period is a good time to deal with textured ceilings.
What to look for in a quote
- Which areas and materials are covered
- Whether they’re insured for asbestos work
- The method and controls
- If the price includes VAT
The process
We bag and label the waste as we work, then taken to a permitted site. If anything unexpected turns up, we stop and talk to you.
- Describe the rooms and coatings
- We sample the coating first
- If it contains asbestos, we agree the method and send a quote
- We seal the room and remove the coating with wet methods
- We clean up and dispose of the waste legally
Preparing for the visit
- Let us know where we can park
- Ensure we can get to the area
- Mention any damage before we arrive
Ask for a quote
To get a quote, send photos through our quote form, or phone 07833 053 749. Include the postcode, the material and some photos.
Read more
- Survey or test first when it isn’t clear what a material is
- Work planned to the Control of Asbestos Regulations 2012 and HSE guidance
- Paperwork for your records: reports, lab results and consignment notes
- Waste sealed and labelled, then taken to a permitted site