Hampshire · England
Asbestos Artex Removal in Balmerlawn, Hampshire
Need Artex removal in Balmerlawn? We work across Balmerlawn and the towns around it, with plain-English advice and a written quote.
- Coatings damaged by leaks
- Ceilings due for plastering or skimming
- Walls before tiling
Get a quote for Balmerlawn
Artex removal in Balmerlawn
Textured coatings like Artex were used on ceilings and walls for decades, and older ones can contain a little asbestos. We test first, then remove the coating with controlled wet methods if needed. People often contact us about damaged or cracked coatings and coatings in the way of electrical work, involving Artex ceilings, coated plasterboard and textured walls.
Village homes like those in Balmerlawn have often been altered several times, so ceilings may have been coated during an earlier renovation. Not sure what you need? Just ask: we’ll tell you honestly whether it’s a test, a survey or removal.
- Area
- Balmerlawn (SO42)
- County
- Hampshire
- Service
- Artex tested, then removed with wet methods
- You receive
- Lab result and consignment note
- Price
- Quoted individually, in writing
- Phone
- 07833 053 749
- Updated
- 26 October 2026
Options to consider in Balmerlawn
Skimming over Artex is an option, but never sand it first, and it remains in place. Compare what each quote includes, not just the total: the scope, the method, the waste and the paperwork.
Why us?
- London, Kent, Surrey, Sussex and beyond
- Accredited laboratory results
- Paperwork you can show your buyer, landlord or builder
- Waste taken to a permitted site with a consignment note
Take a look at our prices page and published price ranges.
A closer look at the materials
Painted coatings
The sample includes the coating itself.
Coated plasterboard
Coatings are applied over plasterboard or plaster. Sometimes it’s simpler to remove the boards whole.
Common questions in Balmerlawn
Can you deal with asbestos on rural buildings in the New Forest National Park?
Yes. The asbestos rules are the same in protected landscapes, though access to rural buildings may need planning.
Do textured ceilings in Balmerlawn homes contain asbestos?
Some may, but many coatings do not contain asbestos. Testing a sample is the only way to know.
Will I get the price in writing?
Yes, always.
Is Artex removal licensed work?
Generally not: HSE’s code of practice says textured coating work is not normally licensable, but larger-scale steam or gel removal must be notified first.
Do you work in Balmerlawn?
We do: our area includes Balmerlawn and the places around it. Send the postcode and a few photos and we will quote.
Should all asbestos be removed?
Not always: sound material that won’t be disturbed can often stay. Keep a record and check its condition.
What should I do if I’ve disturbed asbestos?
Leave the area, keep others out and close the door if you can. Don’t try to clean up the debris yourself, then contact a professional.
What does licensed work mean?
Licensed work is work on the materials most likely to release fibres: pipe lagging, sprayed coatings and most insulating board. It needs a contractor with an HSE licence.
Looking after things afterwards
Covered coatings should be recorded.
Staying safe afterwards:
- File the test result and waste note
- Keep pets out of the work area
- Give us room sizes
- Test every different coating
Avoid these
Hold off on drilling until you have a result.
If a coating has been damaged by a leak, keep people away from fallen pieces and ask for advice.
Textured ceilings in Balmerlawn
Balmerlawn is about 5 miles north of Lymington, in Hampshire. For Artex jobs in Balmerlawn, tell us about parking and access. We cover all 683 towns and villages in Hampshire, from the larger towns to small villages. You can also see our page for Southampton, about 10 miles away.
If you are refurbishing flats near Brockenhurst station, textured ceilings can be tested between tenancies. Non-domestic buildings like Brockenhurst Church of England Primary School should already have records of any textured coatings. Balmerlawn is within about a mile of the New Forest National Park, and older rural homes there often have textured ceilings from past renovations. Balmerlawn is within about 6 miles of the coast; indoor work like textured coating removal isn’t affected by the weather.
Here we cover the SO42 postcode area, and your Artex job can be anywhere in it. For properties just outside Balmerlawn, we cover Brockenhurst (1 mile south-west), Setley (1 mile south), South Weirs (2 miles south-west), Lyndhurst (3 miles north) and Emery Down (3 miles north). Larger places within reach include Eastleigh (14 miles north-east), Totton (7 miles north), Chandler's Ford (13 miles north-east), Hedge End (13 miles north-east), Lymington (5 miles south) and Romsey (12 miles north).
Nearby you’ll also find Lymington New Forest Hospital (4 miles south).
- Nearby, you will find Rose And Crown Hotel (0.6 miles south-west)
DIY and asbestos
Never put asbestos in a bin or skip. It must go to a permitted site; check with your council about small amounts.
HSE’s advice to the public is not to try to repair or remove asbestos yourself. Licensed materials are strictly for licensed contractors.
Typical Artex jobs in Balmerlawn
Coatings get damaged by water leaks, cracks and DIY, which can make them crumble.
People usually contact us about one of these:
- Textured walls before a refit
- Coatings scraped during DIY
- Coatings in the way of electrical work
- Rented flats before redecoration
In older homes in Balmerlawn, textured ceilings were often added in later decades.
What your quote should include
- What category of work it is
- How the work will be done, and the controls used
- Whether VAT is included
- That licensed work will be done by an HSE-licensed contractor
The scope of Artex removal
So you know what to expect:
- Other asbestos materials found in the room are dealt with separately
- The room being worked on has to be empty and sealed off
- We test before removal, because a clear result means ordinary methods can be used
If you are unsure, describe the job and send photos, and we’ll advise before you book.
What we deal with
- Patched or painted coatings
- Coated plasterboard
- Ceiling roses and cornices (coated)
- Swirl and stipple patterns
- Artex ceilings
- Textured walls
Responsibilities for owners
If you own a block of garages or outbuildings that you let should know what the roofs are made of, before repairs are arranged.
Before maintenance in a rented home, agents may ask about asbestos. A test or survey gives a definite answer.
Places near Balmerlawn
More for properties in Balmerlawn
What happens
For board removal, we take the boards down in whole pieces. We’ll tell you when we’ve finished and what you’ll receive afterwards.
- Describe the rooms and coatings
- We test the coating if it hasn’t been tested
- We plan the method and quote
- We seal the room and remove the coating with wet methods
- We clean up and dispose of the waste legally
Getting ready
- Find any old asbestos reports
- Ensure pets and children are elsewhere
- Leave the suspect material alone until we arrive
Get a quote
Include any existing survey or test when you send photos through our quote form, or phone 07833 053 749; it helps us quote accurately.
Helpful guides
- Survey or test first when it isn’t clear what a material is
- Done to the regulations: HSE guidance and CAR 2012
- Paperwork for your records: reports, lab results and consignment notes
- Legal disposal at a permitted site, with a consignment note