Kent · England
Asbestos Artex Removal in Barham, Kent
Worried about asbestos in Barham? We provide testing and removal of Artex and textured coatings, explained in plain English.
- Walls before tiling
- Coatings already disturbed
- Extensions that cut into ceilings
Artex removal near Barham
Artex in Barham homes
Barham is about 6 miles south-east of Canterbury, in Kent. Homes, landlords and businesses in Barham contact us for Artex jobs about all kinds of jobs. We work in 922 places in Kent, from the larger towns to small villages. You can also see our page for Canterbury, about 6 miles away.
A school like Barham Church of England Primary School should know from its asbestos register whether coatings have been tested. If you’re refurbishing flats near Snowdown station, textured ceilings can be tested between tenancies. Parts of the Kent Downs National Landscape are within about 5 miles of Barham; cottages and farmhouses nearby can have textured coatings too.
We handle Artex jobs in every part of the CT4 postcode area and the streets around it. Streets in the area include The Street, Valley Road and Church Lane, and Artex removal is available on all of them. We also carry out Artex jobs in Derringstone (1 mile south), Gravel Castle (1 mile south-east), Heart's Delight (1 mile south-west), Out Elmstead (1 mile north) and Kingston (1 mile north-west). Within a short drive, we also work in Ashford (13 miles west), Canterbury (6 miles north-west), Margate (15 miles north-east), Dover (8 miles south-east), Folkestone (8 miles south) and Ramsgate (14 miles north-east).
Well-known places in the area include Kent and Canterbury Hospital (5.1 miles north-west).
- Local pubs include Black Robin Public House (0.8 miles north)
Artex removal near Barham
A textured ceiling in good condition is low risk if it’s left alone. The problem comes when it’s sanded, scraped dry, drilled or knocked through during a renovation, which is why testing first matters in Barham. We often deal with swirl patterns, coated plasterboard and coated ceiling roses, and typical jobs are coatings damaged by DIY and loft conversions.
Rural homes near Barham have often been altered over generations, so coatings may date from earlier work. Everything is explained in plain English, including when leaving a material alone is the sensible choice.
- Area
- Barham (CT4)
- Area hub
- Kent
- Service
- Testing and removal of textured coatings
- Afterwards
- Lab result and consignment note
- Quote
- Written quote for your job
- Phone
- 07833 053 749
- Last updated
- 26 October 2026
What happens next
Share the paperwork with your trades.
Looking after any asbestos that remains:
- File the test result and waste note
- Plan around the closed rooms
- Book your plasterer after removal
- Photos help us quote
Don’ts
Never sand or dry-scrape Artex before testing.
Don’t use a steamer or chemical stripper on an untested coating.
Barham: your questions answered
Do you come out to small villages like Barham?
Yes. We cover villages and hamlets as well as towns. Just tell us how to reach the property.
How far is Barham from London?
Barham is about 58 miles from central London, well within our area.
Is it better to remove the coating or the ceiling?
Both work; it depends on the room. We’ll explain the options.
Does all Artex contain asbestos?
Not necessarily: many textured coatings do not contain asbestos. The only way to know is to test a sample.
Do you need a licence to remove Artex?
Generally not: HSE’s code of practice says textured coating work is not normally licensable, but larger-scale steam or gel removal must be notified first.
Do you work in Barham?
We do: Barham is within the area we cover in Kent. Send the postcode and a few photos and we’ll quote.
Can I stay at home while you work?
You can often stay in the rest of the house: the room being worked on is sealed off and kept clear.
I think I’ve damaged asbestos. What now?
Get everyone out of the area and keep it closed. Don’t try to clean up the debris yourself, then contact a professional; your GP can advise if you are worried about your health.
What else we do in Barham
Limits to be aware of
We are upfront about what’s included:
- Big jobs need notifying in advance, which affects the start date
- We need the room cleared
- Other materials may need their own approach
If in doubt, ask: we’ll recommend a test, a survey or removal.
Materials in Barham
- Patched or painted coatings
- Coated plasterboard
- Swirl and stipple patterns
- Textured walls
- Ceiling roses and cornices (coated)
- Artex ceilings
Prices and what affects them
The price of Artex removal depends mainly on:
- How much waste there is
- The survey scope
- Travel and parking
- What the material is and its state
Access makes a big difference to cost, so tell us about access.
Sending photos
To help us quote quickly, send:
- The route in: gates, steps, stairs or the loft hatch
- A wide shot showing where the material is
- Visible markings
- The parking area
Share the postcode, a short description and photos: send photos through our quote form, or phone 07833 053 749, and we will reply with a quote.
Your options compared
Strip the coating or take the boards down? Stripping keeps the ceiling; taking boards down whole can be quicker and cleaner in some rooms. The cost of Artex removal depends on the job: the materials involved, how much there is, access and paperwork. Every quote is individual.
Why choose us
- Accredited laboratory results
- Domestic and commercial work
- Work done to the regulations
- Waste paperwork for every removal
Take a look at how we quote or our cost guide.
What we deal with in Barham
Leaks and DIY can damage coatings, so they may start to flake.
If any of these sound familiar, it’s worth getting advice:
- Rented flats before redecoration
- Flaking textured ceilings
- Ceilings due for rewiring or new downlights
- Structural work through coated ceilings
If your home is one of the older properties in Barham, near Church of St John the Baptist or elsewhere, textured ceilings may date from an earlier renovation.
What your quote should include
- How the work will be done, and the controls used
- What you’ll receive afterwards: a report, results or waste paperwork
- That samples are analysed by an accredited laboratory
- Whether the work is licensed, notifiable non-licensed or non-licensed
A closer look at the materials
Patched areas
We may sample patches separately.
Painted coatings
We sample through the paint into the coating.
Step by step
We finish by cleaning the room thoroughly. We arrive at the agreed time, check the area and explain what we’ll do before we start.
- Describe the coatings and rooms
- We test the coating if it hasn’t been tested
- We plan the removal and send a quote
- The coating is removed with controls
- The room is cleaned and you get the paperwork
Getting ready
- Ensure pets and children are elsewhere
- Tell us about anything that is already damaged
- Leave the suspect material alone until we arrive
Getting a price
Include any existing survey or test when you call 07833 053 749 or use our quote form.
Related guides
Responsibilities for owners
Schools, halls and community buildings are non-domestic premises, so whoever runs them has a duty to manage asbestos.
Duty holders for workplaces and the shared parts of flats in Barham must manage asbestos under the Control of Asbestos Regulations 2012. In practice: find it, assess it, record it and manage it.
- Survey or test first when it isn’t clear what a material is
- Planned to HSE guidance and the Control of Asbestos Regulations 2012
- Paperwork for your records: reports, lab results and consignment notes
- Waste sealed and labelled, then taken to a permitted site