Isle of Wight · England
Artex Removal in Binstead
Artex removal across Binstead and nearby, for homeowners, landlords and businesses. Done to HSE guidance, with paperwork for your records.
- Flaking textured ceilings
- Ceilings before skimming
- Coatings damaged by DIY
Asbestos help in Binstead
How artex removal works in Binstead
A textured ceiling in good condition is low risk if it’s left alone. Trouble starts when it’s sanded, dry-scraped, drilled or knocked through, which is why testing first matters in Binstead. Typical jobs include extensions that cut into ceilings and ceilings due for plastering or skimming, including coated plasterboard, swirl patterns and Artex ceilings.
In areas like Binstead, textured ceilings are a common renovation find, and testing comes first. We explain what we find in plain English, including when leaving a material alone is the sensible choice.
- Where
- Binstead (PO33)
- Region
- Isle of Wight
- What we do
- Textured ceilings and walls
- Afterwards
- Test result and waste paperwork
- Quote
- A written quote before work starts
- Telephone
- 07833 053 749
- Last updated
- 26 October 2026
What it might be made of
Painted coatings
We sample through the paint into the coating.
Patched areas
Different areas may need separate samples.
Your questions about Artex removal in Binstead
Do textured ceilings in Binstead homes contain asbestos?
Some may, but many coatings don’t contain asbestos. Testing a sample is the only way to know.
Is asbestos common in Binstead homes?
If your home in Binstead was built or refurbished before 2000, it may, but only a test can confirm it. Garage roofs, Artex, floor tiles, soffits and flues are typical examples.
Does someone need to be there?
We need access to every area involved in the job, and it helps if you’re around to answer questions.
Does weather affect the work?
It depends on the job: indoor work carries on, while outdoor roof work may be postponed in strong wind or heavy rain.
Should all asbestos be removed?
Not necessarily. If it’s in good condition and nobody will disturb it, leaving it in place and checking it can be the safer choice.
Do I need to move out during Artex removal?
The room being worked on has to be empty and sealed off. You may be able to use the rest of the house.
Do you cover Binstead?
Yes, we do: Binstead is within the area we cover in the Isle of Wight. Share the postcode and a short description and we will quote.
Is Artex removal licensed work?
Generally not: HSE treats textured coating work as normally non-licensed, though large steam or gel jobs are notifiable.
Landlords, managing agents and employers
If your business premises in Binstead were built before 2000, you are likely to need an asbestos register and a management plan, and you must tell contractors what’s there.
Before contractors start, they need to know about any asbestos. HSE regularly reminds owners and trades of it.
Why people call us in Binstead
People used Artex to cover cracks and uneven ceilings, and some contained a small amount of white asbestos (chrysotile) for strength.
You cannot tell by looking, but these are common reasons people contact us:
- Textured walls before a refit
- Ceilings due for rewiring or new downlights
- Loft conversions
- Ceilings coming down
For a school such as Binstead Primary School, the duty holder’s records should show any coatings.
Questions to ask before booking
- Which areas and materials are covered
- How the work will be done, and the controls used
- What’s excluded, such as making good or a new roof
- Which laboratory analyses samples
Which option is right?
Plastering over it is an option, but never sand it first, and it remains in place. Very low prices can mean corners are being cut: controls, protective equipment, laboratory fees and legal disposal all cost money.
Why choose us
- Jobs planned to HSE guidance
- Reports and results you can share
- Homes, rented property and workplaces
- Covering London and the South East
See how we quote and our cost guide.
More for properties in Binstead
Afterwards
File the result and the paperwork.
If asbestos stays in the building:
- Give us room sizes
- Each different coating needs testing
- Keep the results and paperwork
- Plan where you’ll stay or work while rooms are closed off
What to avoid
Do not sand, scrape dry or wire-brush a textured coating before it’s been tested.
Plan testing before the renovation starts.
Should you do it yourself?
Never put asbestos in a bin or skip. It has to go to a site that accepts it, and some councils accept small amounts from residents by arrangement.
HSE’s advice to the public is not to try to repair or remove asbestos yourself. Licensed materials are strictly for licensed contractors.
The process
We start by sealing and protecting the room, then keep the coating wet throughout. If anything unexpected turns up, we stop and talk to you.
- Describe the rooms and coatings
- We sample the coating first
- We plan the method and quote
- The room is sealed off and the coating removed wet, never sanded or dry-scraped
- The waste is bagged, the room cleaned and the waste taken to a permitted site
Before we arrive
- Clear access to the area, loft or garage
- Keep away from the material in the meantime
- Warn neighbours if needed
Get a quote
Tell us about the material, its location and your plans. Send photos through our quote form, or phone 07833 053 749.
Read more
Artex in Binstead homes
Binstead is about 1 mile west of Ryde, in the Isle of Wight. We cover Binstead as part of the Isle of Wight, whatever the size of the job. We cover 125 places across the Isle of Wight. Our nearest city page is Southampton, about 16 miles away.
For rented flats close to Ryde Esplanade station, a void period is a good time to deal with textured ceilings. If your home is one of the older properties in Binstead, near Holy Cross Church or elsewhere, textured ceilings may date from an earlier renovation. Binstead is within about 2 miles of the coast; indoor work like textured coating removal isn’t affected by the weather.
We handle Artex jobs in every part of PO33. Local streets include Pitts Lane, Quarr Road and Church Road; we cover every one. For properties just outside Binstead, we cover Haylands (1 mile south-east), Ryde (1 mile east), Upton (1 mile south), Oakfield (1 mile east) and Elmfield (2 miles east). We also cover nearby towns such as Newport (5 miles west), Cowes (6 miles west), Sandown (5 miles south), Shanklin (7 miles south), Ventnor (9 miles south) and East Cowes (5 miles north-west). If the property is somewhere remote, tell us early so we can plan the journey.
Binstead is a more remote spot, so tell us early and we’ll plan the journey.
Well-known places in the area include Gosport War Memorial Hospital (4.9 miles north) and East Cowes Castle (4.7 miles north-west). Within reach you’ll find Briddlesford Nature Reserve and Brading Down.
- Schools near Binstead include Ryde Academy (0.7 miles south-east) and Ryde School with Upper Chine (0.9 miles east)
- Pubs nearby include The Binstead Arms (under half a mile east)
Good to know
Here’s what Artex removal covers, and what it does not:
- We test before removal, since a negative result changes everything
- Other materials may need their own approach
- The room being worked on has to be empty and sealed off
Not sure what you need? Send us photos and we will tell you honestly before you book.
Materials we see
- Textured walls
- Patched or painted coatings
- Artex ceilings
- Ceiling roses and cornices (coated)
- Swirl and stipple patterns
- Coated plasterboard
- Identify it first: we test or survey before planning removal
- Work planned to the Control of Asbestos Regulations 2012 and HSE guidance
- Paperwork for your records: reports, lab results and consignment notes
- Legal disposal at a permitted site, with a consignment note