A surveyor in a respirator putting a sample of loft material into a sealed bag

Windsor and Maidenhead · England

Artex Removal for Bray

Looking for Artex removal in Bray? We cover Bray and the surrounding area, with clear advice and a written quote.

  • Coatings scraped during DIY
  • Ceilings before plastering
  • Extensions that cut into ceilings

Request a quote Ring 07833 053 749

Artex removal in Bray

Textured coatings like Artex were used on ceilings and walls for decades, and older ones can contain a little asbestos. We test first, then remove the coating with controlled wet methods if needed. People often contact us about walls before tiling and loft conversions, involving textured walls, coated ceiling roses and stipple finishes.

Rural homes near Bray have often been altered over generations, so ceilings may have been coated during an earlier renovation. Every quote is in writing and spells out what’s covered, so there are no surprises.

Workers in respirators bagging waste
Location
Bray (SL6)
Area hub
Windsor and Maidenhead
What we do
Testing and removal of textured coatings
You receive
Lab result and consignment note
Price
A written quote before work starts
Call
07833 053 749
Last updated
26 October 2026

Textured ceilings in Bray

Bray is about 2 miles south-east of Maidenhead, in Windsor and Maidenhead. For Artex jobs in Bray, tell us about parking and access when you get in touch. We cover all 57 towns and villages in Windsor and Maidenhead. We work right across the region, from Bray to Reading (13 miles away).

Older homes across Bray may have coatings added during past renovations. For rented flats close to Taplow station, coatings can be tested while the flat is empty.

Anywhere in SL6, Artex removal is available. Whether your property is on High Street, Old Mill Lane and Beaufort Place or a nearby road, we can help. Other places close to Bray we cover include Dorney Reach (1 mile east), Lake End (1 mile east), Taplow (2 miles north), Dorney (2 miles east) and Hitchambury (2 miles north-east). Further out, we also cover Windsor (4 miles south-east), North Ascot (6 miles south), Cookham (4 miles north), Furze Platt (3 miles north-west), Dedworth (3 miles south-east) and Broomhall (9 miles south).

Nearby you will also find The Reitlinger Bequest Museum (1.1 miles north) and Windsor Castle (4.3 miles south-east). Within reach you will find Bray Pit and Taplow Lake.

  • Nearby schools include Desborough College (1.4 miles north-west)
  • Local pubs include The Fat Duck pub (within half a mile west)
Map of Bray © OpenStreetMap contributors

Landlords, managing agents and employers

If you run a business from older premises in Bray, you should have an asbestos register and management plan, and contractors must be told what’s there.

If you own a block of garages or outbuildings that you let should find out whether the roofs are asbestos cement, before repairs are arranged.

The process

Waste is bagged and labelled as we go, for disposal at a permitted site. At the end, we tell you what was done and what happens next.

  1. Tell us where the textured ceilings and walls are
  2. We sample each different coating for testing
  3. We go through the options and send a quote
  4. We seal off each room and remove the coating wet, or take the boards down whole
  5. The room is cleaned and the waste goes to a permitted site with paperwork

How to prepare

  • Clear the way to the work area
  • Mention any damage before we arrive
  • Tell us about parking and access

Get a quote

Tell us about the material, its location and your plans. Fill in the enquiry form or give us a call on 07833 053 749.

Ask for a quote

Read more

Prices and what affects them

When we quote, we look at:

  • Access to the area
  • The survey scope
  • Parking and access charges
  • The quantity or area

Doing several things in one visit can help, such as testing several materials at once.

Helping us quote

Photos help us understand the job before we visit. Take them from a safe distance without touching the material:

  • Cracks or breaks
  • An overall view
  • Street parking nearby
  • Labels, if any

Not sure what you need? Send photos through our quote form, or phone 07833 053 749 and describe the problem, and we’ll advise.

Can I do it myself?

Sanding, drilling, cutting and jet-washing are the worst things you can do to asbestos materials, so avoid them completely.

Home testing kits exist, but you have to disturb the material to use one. HSE advises that samples are best taken by a competent person.

Materials, one by one

Coated plasterboard

Taking boards down whole avoids stripping the coating.

Patched areas

Different areas may need separate samples.

Afterwards

After removal, the room is cleaned and the waste goes to a permitted site, and you get the paperwork.

A few practical points:

  • Clear the rooms before the work
  • Book your plasterer after removal
  • Each different coating needs testing
  • Give us room sizes

Avoid these

Don’t sand, scrape dry or wire-brush a textured coating before it’s been tested.

If a coating has been damaged by a leak, keep people away from fallen pieces and ask for advice.

Bray questions

Do you cover small places like Bray?

Yes. We cover villages and hamlets as well as towns. Just tell us how to reach the property.

Could my house in Bray contain asbestos?

Homes built or refitted before 2000 can. A sample test is the only reliable answer. Look at garage roofs, textured ceilings, old floor tiles, soffits and flues.

Do you work for landlords and businesses?

Yes, as well as homeowners. Tell us about the property and what you need.

How do I get a quote?

Fill in the enquiry form or give us a call on 07833 053 749. Tell us the postcode, what the material is and where, and send photos if you can.

Does weather affect the work?

Indoor jobs go ahead in any weather. Outdoor roof work can be delayed by strong wind or heavy rain.

What does it cost to remove Artex?

It depends on the area, the number of rooms, the method and the waste. We quote after testing.

Is damaged asbestos an emergency?

First, keep people away from the damaged material: shut the door if you can and don’t sweep it up. Then get in touch and we’ll advise.

Is it OK to scrape off Artex?

Only once you know it’s clear. If it contains asbestos, sanding releases fibres.

Which option is right?

Plastering over it avoids disturbing it, but don’t sand it smooth first, and it remains in place. We do not publish a price list, because jobs vary so much. Our cost guides show published ranges, with dates and sources.

Why us?

  • Waste paperwork for every removal
  • Lab analysis by an accredited laboratory
  • We identify first and remove only what needs removing
  • Across London and the South East

Take a look at how we quote or the cost guide.

Why people call us in Bray

Many trades want a test result first.

Typical jobs in Bray include:

  • Ceilings due for plastering or skimming
  • Damaged or cracked coatings
  • Loft conversions
  • Ceilings due for rewiring or new downlights

Non-domestic buildings like Dorney School should already have records of any textured coatings.

Questions to ask before you book

  • Which laboratory analyses samples
  • If the price includes VAT
  • What’s excluded, such as making good or a new roof
  • That licensed work will be done by an HSE-licensed contractor

Read the checklist

  • Nothing removed blind: unknown materials are tested first
  • Done to the regulations: HSE guidance and CAR 2012
  • Paperwork for your records: reports, lab results and consignment notes
  • Legal disposal at a permitted site, with a consignment note

How it works · Licensed or non-licensed? · Get a quote