East Sussex · England
Artex Removal in Brede
Artex removal for properties in Brede and East Sussex: removal of textured ceilings and walls.
- Coatings in the way of electrical work
- Loft conversions
- Ceilings due for plastering or skimming
Artex removal for Brede
Artex removal near Brede
Skimming or boarding over an intact coating avoids disturbing it, but the asbestos is still there and should be recorded for future work. People often contact us about structural work through coated ceilings and walls before tiling, involving Artex ceilings, textured walls and swirl patterns.
Village homes like those in Brede have often been altered several times, so coatings may date from earlier work. We only recommend work that’s needed.
- Area
- Brede (TN31)
- Region
- East Sussex
- Service
- Textured ceilings and walls
- You receive
- Lab result and consignment note
- Quotes
- Quoted individually, in writing
- Telephone
- 07833 053 749
- Page updated
- 26 October 2026
FAQs for Brede
Is the Artex in my Brede home asbestos?
Some may, but many coatings do not contain asbestos. Testing a sample is the only way to know.
Do you cover Brede from London?
Brede is about 49 miles from central London, well within our area.
How do I get a quote?
Send photos through our quote form, or phone 07833 053 749. Tell us the postcode, what the material is and where, and send photos if you can.
Can asbestos go in my bin?
Never: skips and household bins cannot take asbestos. It has to go to a site that accepts it, with the right paperwork.
What does it cost to remove Artex?
It depends on the area, the method and the waste, and we quote once the coating has been tested.
Do you work for landlords and businesses?
Yes: homeowners, landlords, managing agents, businesses and contractors. Tell us about the property and what you need.
Do you need to see it before quoting?
Often we can quote from clear photos and a description; if not, we’ll arrange to see it.
Is it better to remove the coating or the ceiling?
Either can work: the right choice depends on the room. We will advise room by room.
Afterwards
The ceiling or wall is left ready for your plasterer.
After the job, keep these in mind:
- Tell us which rooms and roughly how big they are
- Test every different coating
- File the test result and waste note
- Line up the plasterer for afterwards
What to avoid
Plan testing before the renovation starts.
Don’t sand, scrape dry or wire-brush a textured coating before it’s been tested.
Should you do it yourself?
DIY sampling means disturbing the material yourself. HSE recommends a competent person takes samples.
Asbestos waste cannot go in household bins, recycling or skips. It has to go to a site that accepts it, and some councils accept small amounts from residents by arrangement.
Artex in Brede homes
Brede is about 5 miles north of Hastings, in East Sussex. If your Artex job is in Brede, let us know about access when you get in touch. Brede is one of 289 towns and villages in East Sussex where we work. We work right across the region, from Brede to Brighton (32 miles away).
For a school such as Brede Primary School, the duty holder’s records should show any coatings. Older homes across Brede may have coatings added during past renovations. The coast is within about 6 miles of Brede, though indoor coating work goes ahead whatever the weather.
We carry out Artex jobs all over the TN31 postcode area and the streets around it. From Brede Hill and Stubb Lane or a nearby road, we can help. Nearby, we also cover Cackle Street (1 mile north), Westfield (2 miles south-west), Kent Street (3 miles south-west), Sedlescombe (3 miles west) and Mill Corner (3 miles north). We also cover nearby towns such as Hastings (5 miles south), Bexhill-on-Sea (8 miles south-west), St Leonards (6 miles south), Hastings Old Town (5 miles south), Belmont (5 miles south) and Heathfield (15 miles west).
Well-known places in the area include Barn Theatre and Museum (2.5 miles south) and Conquest Hospital (3.5 miles south). Open spaces near Brede include Flatropers Wood and Senlac Hill.
- Pubs nearby include The Red Lion Public House (within half a mile north)
Weighing up your options
Remove the coating, or the whole ceiling? Stripping keeps the ceiling; taking boards down whole can be quicker and cleaner in some rooms. We do not publish a price list, because jobs vary so much. Our cost guides show published ranges, with dates and sources.
Why us?
- Covering London and the South East
- Samples analysed by an accredited laboratory
- Paperwork you can show your buyer, landlord or builder
- Identify first, remove only when needed
Read how we price jobs or the cost guide.
How we work
We wear disposable coveralls and suitable respirators, and keep the room closed while we work. Before anything starts, we confirm the areas and materials with you, so there’s no confusion.
- Tell us which rooms and surfaces
- We sample each coating
- We plan the removal and send a quote
- The coating is removed with controls
- The room is cleaned and you get the paperwork
Preparing for the visit
- Leave the suspect material alone until we arrive
- Tell us about parking and access
- Let us know if something’s broken
Get a quote
To get a quote, ring 07833 053 749, or send the details through our contact page. Tell us the postcode, what the material is and where, and send photos if you can.
Helpful guides
Typical Artex jobs in Brede
Older coatings are often painted over many times, which can make them look newer than they are.
These are the materials and situations that most often lead to Artex jobs:
- Ceilings due to be knocked through or removed
- Ceilings due for rewiring or new downlights
- Flaking textured ceilings
- Coatings scraped during DIY
For rented flats close to Doleham station, a void period is a good time to deal with textured ceilings.
Before you book anyone
- How the waste will be disposed of, and whether you will get a consignment note
- For licensed work, a valid HSE licence
- Whether the work is licensed, notifiable non-licensed or non-licensed
- Which laboratory analyses samples
Good to know
So you know what to expect:
- Other asbestos materials found in the room are dealt with separately
- Big jobs need notifying in advance, so allow time
- We leave the surface ready for your plasterer
If in doubt, ask: we’ll recommend a test, a survey or removal.
Materials we see
- Swirl and stipple patterns
- Coated plasterboard
- Textured walls
- Patched or painted coatings
- Ceiling roses and cornices (coated)
- Artex ceilings
Duty holders and landlords in Brede
Schools, halls and community buildings are non-domestic premises, so the duty to manage applies.
Before maintenance in a rented home, agents may ask about asbestos. A test or a survey gives everyone a clear answer.
Towns and villages near Brede
Other services in Brede
Materials, one by one
Coated plasterboard
Board removal avoids stripping.
Painted coatings
Many coatings have been painted over, but the coating underneath is the same.
- Nothing removed blind: unknown materials are tested first
- Planned to HSE guidance and the Control of Asbestos Regulations 2012
- Written paperwork: reports, results and waste consignment notes
- Waste sealed and labelled, then taken to a permitted site