A surveyor in a respirator putting a sample of loft material into a sealed bag

Hampshire · England

Artex Removal for Brighton Hill

Any pre-2000 building in Brighton Hill may contain asbestos. We offer removal of textured ceilings and walls.

  • Coatings damaged by DIY
  • Damaged or cracked coatings
  • Ceilings before plastering

Ask for a quote Call 07833 053 749

Need Artex removal in Brighton Hill?

Brighton Hill: your questions answered

Do textured ceilings in Brighton Hill homes contain asbestos?

Some may, but many coatings do not contain asbestos. Testing a sample is the only way to know.

Do you cover Brighton Hill and the area around Basingstoke station?

Yes. Basingstoke station is about 1.6 miles north-east of Brighton Hill, and we cover both.

Do you need a licence to remove Artex?

Normally not, according to HSE. Larger-scale removal using steam or gel is notifiable non-licensed work.

Does someone need to be there?

We need access to every area in the job, and to be available for questions.

Do you work in flats?

Yes. For the shared areas of a block, the managing agent or freeholder holds the asbestos information.

Does all Artex contain asbestos?

Not every coating does: plenty of textured coatings contain no asbestos. Testing a sample is how you find out.

What if the weather’s bad?

Indoor jobs go ahead in any weather. Outdoor roof work can be delayed by strong wind or heavy rain.

When can you start?

That depends on the work and current bookings. We will give you dates when we quote, and notifiable work needs notifying before it starts.

About our artex removal in Brighton Hill

Removing an asbestos textured coating means sealing off the room, keeping the coating wet and never sanding or scraping it dry. Typical jobs include ceilings due for plastering or skimming and extensions that cut into ceilings, involving Artex ceilings, stipple finishes and coated ceiling roses.

Homes in areas like Brighton Hill may have textured ceilings in several rooms, so each type needs testing. We explain what we find in plain English, including when leaving a material alone is the sensible choice.

Area
Brighton Hill (RG22, RG21)
Area hub
Hampshire
Service
Testing and removal of textured coatings
You receive
Result and waste note
Quote
A written quote before work starts
Telephone
07833 053 749
Last updated
26 October 2026
A surveyor with a sample bag and scraper indoors

After we’ve finished in Brighton Hill

Tell your plasterer and electrician what was done.

After we have finished:

  • File the test result and waste note
  • Keep pets out of the work area
  • Book your plasterer after removal
  • Each different coating needs testing

Don’ts

If a coating has been damaged by a leak, keep people away from fallen pieces.

Plan testing before the renovation starts.

Limits to be aware of

Every job has limits; these are the usual ones:

  • We leave the surface ready for your plasterer
  • We test before removal, because a clear result means ordinary methods can be used
  • Big jobs need notifying in advance, which affects the start date

Not sure what you need? Send us photos and we will tell you honestly.

Common materials

  • Textured walls
  • Artex ceilings
  • Swirl and stipple patterns
  • Ceiling roses and cornices (coated)
  • Coated plasterboard
  • Patched or painted coatings

Service details

Landlords, managing agents and employers

Between tenancies is a good time to deal with asbestos, when rooms are empty and work can be done without disruption.

If you are responsible for a non-domestic building or the common parts of flats in Brighton Hill, you have a duty to manage asbestos under regulation 4 of the Control of Asbestos Regulations 2012. That means finding it, assessing it, recording it and planning how to manage it.

Brighton Hill properties and textured coatings

Brighton Hill is about 1 mile south of Basingstoke, in Hampshire. For Artex jobs in Brighton Hill, tell us about parking and access when you get in touch. We work in 683 places in Hampshire. Our nearest city page is Reading, about 15 miles away.

A school like Brighton Hill Community School should know from its asbestos register whether coatings have been tested. If you’re refurbishing flats near Basingstoke station, coatings can be tested while the flat is empty.

We handle Artex jobs in every part of RG22 and RG21 and the streets around it. Local streets include Pheby Road, Wella Road and Barber Road; we cover every one. With the A30 close by, Brighton Hill is simple for us to get to. Close by, we cover South Ham (1 mile north), Buckskin (1 mile north-west), Basingstoke (1 mile north), Hatch Warren (1 mile south) and Kempshott (1 mile west). Within a short drive, we also work in Farnborough (15 miles east), Fleet (12 miles east), Aldershot (15 miles east), Alton (9 miles south-east), Yateley (14 miles north-east) and Tadley (7 miles north).

Other landmarks nearby include Basingstoke and North Hampshire Hospital (2.1 miles north) and Festival Place (1.5 miles north-east). Within reach you’ll find Daneshill Park Woods and Farleigh Hill.

  • Local schools include Chalk Ridge Primary School (less than half a mile south-east) and Coppice Spring School (within half a mile west)
  • Nearby, you’ll find Jolly Farmer Public House (1 mile south-east)
Map of Brighton Hill © OpenStreetMap contributors

Doing it yourself?

A professional job comes with paperwork: a record that buyers, insurers and builders may want to see.

Sanding, drilling, cutting and jet-washing are the worst things you can do to asbestos materials, so avoid them completely.

Step by step

The coating is softened with water, steam or gel and removed with hand tools, with no sanding or dry scraping. We go over the plan with you first, so you know what’s happening.

  1. Tell us which rooms and surfaces
  2. We sample each coating
  3. If it contains asbestos, we agree the method and quote
  4. We seal off the room and remove the coating wet
  5. The room is cleaned and you get the paperwork

Preparing for the visit

  • Let us know where we can park
  • Move belongings away from the area, without touching the material
  • Dig out previous surveys

Ask for a quote

Include any existing survey or test when you fill in the enquiry form or give us a call on 07833 053 749; it helps us quote accurately.

Tell us what you need

Helpful guides

Choosing the right option

Strip the coating or take the boards down? Stripping keeps the ceiling; taking boards down whole can be quicker and cleaner in some rooms. When comparing quotes, check what’s included: scope, method, waste disposal and paperwork.

What you get

  • Waste paperwork for every removal
  • Homes, rented property and workplaces
  • Identify first, remove only when needed
  • Lab analysis by an accredited laboratory

See how we price jobs and our cost guide.

A closer look at the materials

Ceiling roses and cornices

Decorative mouldings are sometimes coated too.

Coated plasterboard

Taking boards down whole avoids stripping the coating.

Prices and what affects them

Quotes vary because of:

  • The quantity or area
  • Whether the work is non-licensed, notifiable or licensed
  • The type of material and its condition
  • Location, parking and any London charges

There’s no one-size price, as every job differs. Our cost guides show published ranges, with dates and sources.

Helping us quote

The most useful photos are:

  • Visible markings
  • Cracks or breaks
  • Approximate dimensions
  • The route in: gates, steps, stairs or the loft hatch

To get a quote, fill in the enquiry form or give us a call on 07833 053 749. Include the postcode, the material and some photos.

  • Identify it first: we test or survey before planning removal
  • Done to the regulations: HSE guidance and CAR 2012
  • Paperwork for your records: reports, lab results and consignment notes
  • Legal disposal at a permitted site, with a consignment note

How it works · Licensed or non-licensed? · Get a quote