Buckinghamshire · England
Artex Removal for Brill
Worried about asbestos in Brill? Our service covers Artex removal, with testing first, with clear advice at each step.
- Structural work through coated ceilings
- Landlord refurbishments
- Ceilings due for rewiring or new downlights
Artex removal in Brill
Artex removal near Brill
Covering an intact coating is one option, but the asbestos is still there and should be recorded for future work. Common materials are stipple finishes, swirl patterns and coated ceiling roses, and typical jobs are coatings damaged by DIY and coatings damaged by leaks.
Rural homes near Brill have often been altered over generations, so ceilings may have been coated during an earlier renovation. We follow HSE guidance and the Control of Asbestos Regulations 2012.
- Area
- Brill (HP18)
- County
- Buckinghamshire
- What we do
- Textured ceilings and walls
- You receive
- Test result and waste paperwork
- Quotes
- Quoted individually, in writing
- Phone
- 07833 053 749
- Last updated
- 26 October 2026

Can I do it myself?
Sanding, drilling, cutting and jet-washing are the worst things you can do to asbestos materials.
DIY sampling means disturbing the material yourself. HSE recommends a competent person takes samples.
What it might be made of
Coated plasterboard
Board removal avoids stripping.
Textured walls
Some walls were also given textured finishes.
Typical Artex jobs in Brill
Many ceilings have years of paint on them, which can make them look newer than they are.
Asbestos can be in plenty of places in buildings from before 2000. Common situations include:
- Structural work through coated ceilings
- Ceilings before plastering
- Coatings already disturbed
- Walls before tiling
If your home is one of the older properties in Brill, near United Reformed Church or elsewhere, textured ceilings may date from an earlier renovation.
Before you book anyone
- What you’ll receive afterwards: a report, results or waste paperwork
- That licensed work will be done by an HSE-licensed contractor
- Which areas and materials are covered
- Whether VAT is included
The process
We soften the coating and take it off by hand, never sanded or scraped dry. We go over the plan with you first, so you know what’s happening.
- Tell us which rooms and surfaces, and roughly how big they are
- We test the coating if it hasn’t been tested
- If it contains asbestos, we agree the method and send a quote
- We seal the room and remove the coating with wet methods
- The waste is bagged, the room cleaned and the waste taken to a permitted site
Before we arrive
- Clear belongings, but leave the material alone
- Keep children and pets away on the day
- Clear access to the area, loft or garage
Getting a price
Include any existing survey or test when you call 07833 053 749 or use our quote form; it helps us quote accurately.
Related guides
Prices and what affects them
Quotes vary because of:
- What the material is and its state
- The survey scope
- How much waste there is
- The size of the job
A test can sometimes save the cost of removal altogether, if the material turns out not to contain asbestos.
Helping us quote
The most useful photos are:
- Damaged areas
- A closer photo of the material, without touching it
- A rough size or measurement
- How we’d reach it
Not sure what you need? Call 07833 053 749 or use our quote form and describe the problem, and we will advise.
Brill questions
Is asbestos common in Brill homes?
If your home in Brill was built or refurbished before 2000, it may, but only a test can confirm it. Garage roofs, Artex, floor tiles, soffits and flues are typical examples.
Do you cover small places like Brill?
Yes. We cover villages and hamlets as well as towns. Just tell us how to reach the property.
Do you cover Brill?
Yes. We cover Brill and the surrounding area as part of Buckinghamshire. Tell us the postcode and what you need.
Does someone need to be there?
We need access to every area in the job, and to be available for questions.
How quickly can you come out?
That depends on the work and current bookings. You’ll get available dates with the quote.
Do I need a test or a survey?
Testing covers particular materials, while a survey covers everything in scope. Before building work, you normally need a survey.
Do you work on commercial premises?
Yes: shops, offices, industrial units and community buildings as well as homes. The duty holder should be able to share the asbestos register.
Can I put asbestos in a skip?
Never: asbestos waste is hazardous and cannot go in skips, bins or recycling. It must go to a permitted site.
Options to consider in Brill
You’ll find DIY products for removing Artex, but if it contains asbestos, the job needs proper controls. Always test first. When comparing quotes, check what’s included: scope, method, waste disposal and paperwork.
Why choose us
- Reports and results you can share
- London, Kent, Surrey, Sussex and beyond
- Samples analysed by an accredited laboratory
- Waste taken to a permitted site with a consignment note
Read how we quote or the cost guide.
Looking after things afterwards
Tell your plasterer and electrician what was done.
If asbestos stays in the building:
- Plan where you will stay or work while rooms are closed off
- Keep pets away
- Book your plasterer after removal
- Photos help us quote
Things not to do
Don’t use a steamer or chemical stripper on an untested coating.
Plan testing before the renovation starts.
Textured ceilings in Brill
Brill is about 6 miles north-west of Thame, in Buckinghamshire. Properties in Brill range from older houses to newer estates and commercial buildings, and anything built or refurbished before 2000 can contain asbestos. Brill is one of 263 places in Buckinghamshire we cover. We work right across the region, from Brill to Oxford (9 miles away).
For a school such as Brill Church of England School, the duty holder’s records should show any coatings.
Wherever your property is in HP18, Artex removal is available, from busy streets to quiet lanes. Streets in the area include High Street, The Square and Brae Hill, and Artex removal is available on all of them. If your property is just outside Brill, we also cover Little London (1 mile south-west), Oakley (1 mile south-west), Piddington (2 miles north), Ludgershall (2 miles north) and Blackthorn (4 miles north-west). Within a short drive, we also work in Aylesbury (10 miles east), Buckingham (13 miles north), Elmhurst (10 miles east), Southcourt (10 miles east), Princes Risborough (12 miles south-east) and Haydon Hill (9 miles east).
The countryside around Brill includes Bernwood Meadows.
- Local pubs include The Red Lion pub (less than half a mile south-east)
Good to know
Here’s what Artex removal covers, and what it doesn’t:
- We test before removal, since a negative result changes everything
- Other materials may need their own approach
- Larger-scale steam or gel removal must be notified before it starts, so allow time
If you’re unsure, describe the job and send photos, and we will advise before booking.
Materials in Brill
- Patched or painted coatings
- Artex ceilings
- Textured walls
- Swirl and stipple patterns
- Coated plasterboard
- Ceiling roses and cornices (coated)
- Identify it first: we test or survey before planning removal
- Planned to HSE guidance and the Control of Asbestos Regulations 2012
- Everything in writing: quotes, reports, results and waste notes
- Asbestos waste double-bagged or wrapped and taken to a permitted site