A surveyor in a respirator putting a sample of loft material into a sealed bag

West Berkshire · England

Artex Removal for Burnt Hill

Found something that might be asbestos in Burnt Hill? We provide Artex removal, with testing first, explained in plain English.

  • Ceilings before skimming
  • Flaking textured ceilings
  • Structural work through coated ceilings

Ask for a quote Phone 07833 053 749

Asbestos help in Burnt Hill

How artex removal works in Burnt Hill

Taking down the plasterboard can be easier than stripping the coating. We’ll talk you through the options for your rooms in Burnt Hill. From landlord refurbishments and ceilings before plastering, we deal with coated ceiling roses, stipple finishes and Artex ceilings and more.

Rural homes near Burnt Hill have often been altered over generations, so ceilings may have been coated during an earlier renovation. If you are unsure what you need, ask: we will recommend a test, a survey or removal, whichever fits.

Where
Burnt Hill (RG18)
Region
West Berkshire
Covers
Textured ceilings and walls
Paperwork
Result and waste note
Price
Quoted individually, in writing
Telephone
07833 053 749
Updated
26 October 2026
A sealed sample bag held up by a surveyor

Textured ceilings in Burnt Hill

Burnt Hill is about 5 miles north-east of Thatcham, in West Berkshire. Homes, landlords and businesses in Burnt Hill contact us for Artex jobs. Burnt Hill is one of 155 places in West Berkshire where we work. We work right across the region, from Burnt Hill to Reading (9 miles away).

A school like Yattendon C.E. Primary School should know from its asbestos register whether coatings have been tested, before decorators start. Older homes across Burnt Hill may have coatings added during past renovations. Parts of the North Wessex Downs National Landscape are within about 5 miles of Burnt Hill; cottages and farmhouses nearby can have textured coatings too.

This part of West Berkshire takes in RG18. For properties just outside Burnt Hill, we cover Stubbles (1 mile north), Stanford Dingley (2 miles south), Ashampstead (2 miles north), Ashampstead Green (2 miles north) and Upper Basildon (2 miles north-east). Further out, we also cover Newbury (8 miles south-west), Thatcham (5 miles south-west), Burghfield Common (7 miles south-east), Speenhamland (7 miles south-west), Hungerford (15 miles west) and Spencers Wood (10 miles south-east).

Well-known places in the area include Yattendon Castle (1.1 miles west). Within reach you’ll find Hartslock.

Map of Burnt Hill © OpenStreetMap contributors

Landlords, managing agents and employers

Void periods are a good time for asbestos work, when rooms are empty and work can be done without disruption.

Duty holders for workplaces and the shared parts of flats in Burnt Hill must manage asbestos under regulation 4 of the Control of Asbestos Regulations 2012. That means finding it, assessing it, recording it and planning how to manage it.

The scope of Artex removal

We’re upfront about what’s included:

  • We test before removal, since a negative result changes everything
  • Other materials may need their own approach
  • We leave the surface ready for your plasterer

If in doubt, ask: we will recommend a test, a survey or removal.

What we deal with

  • Patched or painted coatings
  • Coated plasterboard
  • Artex ceilings
  • Swirl and stipple patterns
  • Textured walls
  • Ceiling roses and cornices (coated)

Service details

Materials we deal with

Coated plasterboard

Board removal avoids stripping.

Artex ceilings

We test each different coating.

Common questions in Burnt Hill

Do you work near Pangbourne station?

Yes. Pangbourne station is about 4.2 miles east of Burnt Hill, and we cover both.

Do you cover small places like Burnt Hill?

We do: small villages are covered too. Just tell us how to reach the property.

How much does Artex removal cost in Burnt Hill?

It depends on the area, the method and the waste, and we quote once the coating has been tested.

Can you quote from photos?

Photos are often enough to give a quote, but larger or unclear jobs may need a visit.

Is Artex removal licensed work?

Normally not: HSE’s code of practice says textured coating work is not normally licensable, but larger-scale steam or gel removal must be notified first.

Can you advise before I buy a property?

Yes. A pre-purchase survey tells you what’s there before you exchange, as long as the seller agrees.

Do you work for landlords and businesses?

We do. Landlords, agents, businesses and builders all use our services.

Is it better to remove the coating or the ceiling?

Either can work: the right choice depends on the room. We will recommend one for each room.

Weighing up your options

Remove the coating, or the whole ceiling? Each has pros and cons, depending on the room. Our quotes are clear about VAT, so you can compare like with like.

How we work in Burnt Hill

  • Waste paperwork for every removal
  • London, Kent, Surrey, Sussex and beyond
  • Identify first, remove only when needed
  • Work done to the regulations

See our prices page and published price ranges.

What affects the price in Burnt Hill

Quotes vary because of:

  • Parking and access charges
  • The size of the job
  • How easy it is to reach
  • The number of samples or the size of the building

There’s no one-size price, as every job differs. Our cost guides show published ranges, with dates and sources.

Photos that help

Before you send photos, a few tips:

  • Where we could park
  • Damaged areas
  • A closer photo of the material, without touching it
  • Labels, if any

For an accurate quote, tell us what you’ve found, where it is and what you’re planning. Fill in the enquiry form or give us a call on 07833 053 749.

After the job

The surface is left ready for making good.

A few practical points:

  • Each different coating needs testing
  • Empty the rooms in advance
  • Tell us which rooms and roughly how big they are
  • Photos help us quote

Things not to do

Do not use a steamer or chemical stripper on an untested coating.

Hold off on drilling until you have a result.

Step by step

At the end, the room is cleaned and checked. If anything unexpected turns up, we stop and talk to you before carrying on.

  1. Let us know which rooms have textured coatings
  2. Each coating is sampled and tested
  3. We go through the options and send a quote
  4. We seal off each room and remove the coating wet, or take the boards down whole
  5. The room is cleaned and the waste goes to a permitted site with paperwork

Before we arrive

  • Let us know where we can park
  • Keep children and pets away on the day
  • Dig out previous surveys

Ask for a quote

To get a quote, fill in the enquiry form or give us a call on 07833 053 749. Include the postcode, the material and some photos.

Tell us what you need

Read more

Doing it yourself?

Found something mid-DIY? Stop: leave the area, do not clean it up, and ask for advice.

Working on a fragile asbestos cement roof is dangerous in itself, as well as an asbestos risk, so stay off it.

  • Survey or test first when it isn’t clear what a material is
  • Done to the regulations: HSE guidance and CAR 2012
  • Everything in writing: quotes, reports, results and waste notes
  • Legal disposal at a permitted site, with a consignment note

How it works · Licensed or non-licensed? · Get a quote