West Sussex · England
Artex Removal for Bury
Any pre-2000 building in Bury may contain asbestos. We offer Artex removal, with testing first.
- Walls before tiling
- Coatings damaged by DIY
- Coatings in the way of electrical work
Need Artex removal in Bury?
Artex removal in Bury
A textured ceiling in good condition is low risk if it’s left alone. Trouble starts when it’s sanded, dry-scraped, drilled or knocked through, which is why testing first matters in Bury. Whether it’s structural work through coated ceilings and walls before tiling, we cover textured walls, swirl patterns and stipple finishes and more.
In a village like Bury, textured coatings turn up in cottages and later homes alike. Every quote is in writing and spells out what’s covered, so you know where you stand.
- Location
- Bury (RH20)
- Region
- West Sussex
- What we do
- Textured ceilings and walls
- Afterwards
- Lab result and consignment note
- Quotes
- A written quote before work starts
- Call
- 07833 053 749
- Last updated
- 26 October 2026
Prices and what affects them
We base our quote on:
- Parking and access charges
- The type of material and its condition
- Access: height, lofts, steps and space
- Licensed or non-licensed
There’s no one-size price, as every job differs. Our cost guides show published ranges, with dates and sources.
Helping us quote
Photos often save us a visit:
- How we’d reach it
- Approximate dimensions
- A close-up from a safe distance
- Where we could park
For a quote, call 07833 053 749 or use our quote form. Tell us the postcode, what the material is and where, and send photos if you can.
Step by step
For board removal, we take the boards down in whole pieces and bagged or wrapped. Nobody else needs to be in the work area, so please keep children and pets away.
- Tell us which rooms and surfaces
- We test the coating if it hasn’t been tested
- If it contains asbestos, we agree the method and quote
- The coating is removed with controls
- We clean up and send the waste paperwork
Before we arrive
- Let neighbours know if the work is near them
- Mention any parking restrictions
- Dig out previous surveys
Getting a price
Photos and a postcode help us quote quickly: just send photos through our quote form, or phone 07833 053 749.
Read more
Good to know
It’s worth knowing what Artex removal does and does not cover:
- Untested coatings are tested first, since a negative result changes everything
- Other asbestos materials found in the room are dealt with separately
- Larger-scale steam or gel removal must be notified before it starts, so allow time
If you’re unsure, describe the job and send photos, and we will advise before booking.
Common materials
- Swirl and stipple patterns
- Ceiling roses and cornices (coated)
- Patched or painted coatings
- Textured walls
- Coated plasterboard
- Artex ceilings
Questions from Bury
Do you cover Bury from London?
Bury is about 46 miles from central London, well within our area.
Do you come out to small villages like Bury?
We do: small villages are covered too. Tell us about access and parking.
What if asbestos is found during building work?
Stop work in that area and keep people out, then have the material identified before anything else happens.
Should I take the ceiling down instead?
Either can work: it depends on the room and the condition of the ceiling. We will recommend one for each room.
Do you need a licence to remove Artex?
Normally not: HSE treats textured coating work as normally non-licensed, but larger-scale steam or gel removal must be notified first.
Do I get anything in writing afterwards?
It depends on what we do: a report for a survey, a lab result for a test, or waste paperwork for removal.
Do I need to move out during Artex removal?
The work room is sealed and kept clear. Often you can stay in other rooms.
Can I plaster over Artex that contains asbestos?
Covering it is an option if it’s intact, but never sand it first, and keep a record.
Artex removal around Bury
Bury is about 7 miles north of Littlehampton, in West Sussex. Wherever your property is in Bury, tell us the postcode and what you need. Bury is one of 371 towns and villages in West Sussex where we work. You can also see our page for Brighton, about 20 miles away.
Non-domestic buildings like Bury CofE Primary School should already have records of any textured coatings, before decorators start. In older homes in Bury, textured ceilings were often added in later decades. Bury is within about 2 miles of the South Downs National Park; cottages and farmhouses nearby can have textured coatings too.
Wherever your property is in RH20, we can help with Artex removal. From The Street, Houghton Lane and Coombe Crescent or anywhere nearby, we can help. Neighbouring places we cover include West Burton (1 mile north-west), Amberley (1 mile east), Watersfield (2 miles north), Cross Gate (2 miles east) and Coldwaltham (2 miles north-east). Larger places within reach include Horsham (15 miles north-east), Worthing (9 miles south-east), Bognor Regis (10 miles south-west), Chichester (11 miles south-west), Littlehampton (7 miles south) and Shoreham-by-Sea (14 miles east).
Well-known places in the area include Amberley Museum (1.2 miles south-east) and Arundel and District Hospital (3.8 miles south). Green spaces nearby include Bignor Hill and Amberley Wild Brooks.
- Schools near Bury include Dorset House School (within half a mile east)
What it might be made of
Patched areas
Patch repairs may use a different material from the original coating.
Artex ceilings
Swirl, stipple and other patterns on ceilings are the most common textured coatings.
After we’ve finished in Bury
Note which other rooms have coatings, for future work.
Looking after any asbestos that remains:
- Plan around the closed rooms
- Test every different coating
- Tell us which rooms and roughly how big they are
- Book your plasterer after removal
What to avoid
Never sand or dry-scrape Artex before testing.
Don’t try DIY removal products on untested coatings.
Should you do it yourself?
Home testing kits exist, but you have to disturb the material to use one. HSE recommends a competent person takes samples.
Asbestos waste can’t go in household bins, recycling or skips. It has to go to a site that accepts it, and some councils accept small amounts from residents by arrangement.
Common reasons for Artex jobs in Bury
Leaks and DIY can damage coatings, so they may start to flake.
If any of these sound familiar, it’s worth getting advice:
- Ceilings due for plastering or skimming
- Flaking textured ceilings
- Ceilings before downlights go in
- Ceilings coming down
If you’re refurbishing flats near Amberley station, textured ceilings can be tested between tenancies.
Before booking anyone
- The scope of the job, in writing
- That samples are analysed by an accredited laboratory
- Whether VAT is included
- The method and controls
For businesses and landlords in Bury
If you run a business from older premises in Bury, you are likely to need an asbestos register and a management plan, and contractors must be told what’s there.
If you own a block of garages or outbuildings that you let should know what the roofs are made of, before anyone carries out repairs.
- Identify it first: we test or survey before planning removal
- Work planned to the Control of Asbestos Regulations 2012 and HSE guidance
- Everything in writing: quotes, reports, results and waste notes
- Asbestos waste double-bagged or wrapped and taken to a permitted site