A surveyor in a respirator putting a sample of loft material into a sealed bag

Kent · England

Asbestos Artex Removal in Calcott, Kent

Need Artex removal in Calcott? We work across Calcott and the towns around it, with clear advice and a written quote.

  • Coatings damaged by DIY
  • Ceilings before skimming
  • Walls before a kitchen or bathroom refit

Ask for a quote Call 07833 053 749

Asbestos help in Calcott

Common questions in Calcott

Is the Artex in my Calcott home asbestos?

Some may, but many coatings don’t contain asbestos. Testing a sample is the only way to know.

Do you cover Calcott from London?

We cover Calcott, about 54 miles from central London.

Do I need to be at home?

We need access to every area in the job, and to be available for questions.

Can you help a business or landlord?

Yes: homeowners, landlords, managing agents, businesses and contractors. Send the details.

How do I know if my property contains asbestos?

If it was built or refurbished before 2000, it may. Only laboratory analysis of a sample can confirm it.

Can you help with a flat?

Yes. For shared areas, the managing agent or freeholder holds the asbestos information.

Do you need a licence to remove Artex?

Normally not, according to HSE. Larger-scale removal using steam or gel is notifiable non-licensed work.

Does asbestos always have to come out?

Not necessarily. Sound material that won’t be touched can often stay, as long as it’s recorded.

Artex removal in Calcott

According to HSE, textured coating work is normally non-licensed. Bigger jobs using steam or gel must be notified before they start. From ceilings before skimming and rented homes refurbished between tenants, we deal with coated ceiling roses, Artex ceilings and textured walls.

In a village like Calcott, textured coatings turn up in cottages and later homes alike. Every job comes with paperwork, which is useful when you sell, let or build.

Workers in respirators bagging waste
Location
Calcott (CT3)
Region
Kent
Service
Artex tested, then removed with wet methods
Afterwards
Test result and waste paperwork
Quotes
Quoted individually, in writing
Phone
07833 053 749
Updated
26 October 2026

Good to know

A few things to be aware of:

  • We test before removal, because a clear result means ordinary methods can be used
  • The room being worked on has to be empty and sealed off
  • We leave the surface ready for your plasterer

If you are unsure, describe the job and send photos, and we’ll advise.

Common materials

  • Artex ceilings
  • Textured walls
  • Patched or painted coatings
  • Swirl and stipple patterns
  • Ceiling roses and cornices (coated)
  • Coated plasterboard

Read more about the service

What we deal with in Calcott

Many trades want a test result first.

Typical jobs in Calcott include:

  • Loft conversions and extensions
  • Coatings already disturbed
  • Ceilings due for rewiring or new downlights
  • Ceilings due to be knocked through or removed

If you are refurbishing a rental near Sturry station, a void period is a good time to deal with textured ceilings.

Questions to ask before booking

  • Waste disposal and the consignment note
  • Whether VAT is included
  • Proof of an HSE licence where it’s needed
  • What’s excluded, such as making good or a new roof

Read the checklist

Can I do it myself?

HSE advises the public not to repair or remove asbestos themselves. Licensed materials are strictly for licensed contractors.

With a professional job, you get a record: a record that buyers, insurers and builders may want to see.

Which option is right?

What are the options for Artex? If it’s intact and no work will go through it, leaving or covering can make sense; if you want smooth ceilings or need to cut into it, removal is generally better. Identifying asbestos early is cheaper than stopping work later, when the whole project can be held up.

Why us?

  • Covering London and the South East
  • Waste paperwork for every removal
  • Records for your files
  • Domestic and commercial work

See our prices page or our cost guide.

Calcott properties and textured coatings

Calcott is about 3 miles south of Herne Bay, in Kent. We cover Calcott as part of Kent, for Artex jobs of every size. We work in all 922 towns and villages across Kent, from the larger towns to small villages.

Non-domestic buildings like Sturry Church of England Primary School should already have records of any textured coatings, before decorators start. Calcott is within about 4 miles of the coast, though indoor coating work goes ahead whatever the weather.

Anywhere in CT3, Artex removal is available. Other places close to Calcott we cover include Hicks Forstal (1 mile north-east), Broad Oak (1 mile south), Sturry (1 mile south), Herne Common (1 mile north) and Westbere (2 miles south-east). Further out, we also cover Canterbury (3 miles south-west), Margate (12 miles east), Dover (15 miles south-east), Ramsgate (13 miles east), Broadstairs (14 miles east) and Whitstable (4 miles north-west).

A little further out are Canterbury Castle (3.8 miles south-west) and St Martins Hospital (3.2 miles south). The countryside around Calcott includes West Blean and Thornden Woods.

  • Local schools include Spires Academy (1.5 miles south-east) and Frank Montgomery School (1.5 miles south-east)
  • Pubs nearby include Royal Oak Public House (0.9 miles south-west)
Map of Calcott © OpenStreetMap contributors

How we work

For board removal, we take the boards down in whole pieces. We wear suitable protective equipment for the job, and use controls to keep dust down.

  1. Send photos of the textured surfaces
  2. We arrange testing
  3. We talk through the options
  4. We remove it safely if that is what you choose
  5. The waste goes to a permitted site with a consignment note

Before we arrive

  • Keep the area clear of children and pets
  • Mention any damage before we arrive
  • Move belongings away from the area, without touching the material

Ask for a quote

We quote each job individually, because no two are the same. Send photos through our quote form, or phone 07833 053 749 to get started.

Ask for a quote

Read more

Materials, one by one

Ceiling roses and cornices

Decorative mouldings are sometimes coated too.

Patched areas

Patches may be newer material.

Looking after things afterwards

Keep the test result and waste paperwork with your property records.

A few practical points:

  • Give us room sizes
  • Keep the results and paperwork
  • Send photos of the coatings
  • Keep pets out of the work area

Avoid these

Never sand or dry-scrape Artex before testing.

Test before the builders arrive.

For businesses and landlords in Calcott

Community buildings count as non-domestic premises, so the duty to manage applies.

If you own a block of garages or outbuildings that you let should find out whether the roofs are asbestos cement, before repairs are arranged.

  • Survey or test first when it isn’t clear what a material is
  • Done to the regulations: HSE guidance and CAR 2012
  • Paperwork for your records: reports, lab results and consignment notes
  • Asbestos waste double-bagged or wrapped and taken to a permitted site

How it works · Licensed or non-licensed? · Get a quote