Kent · England
Asbestos Artex Removal in Conyer, Kent
Artex removal for properties in Conyer and Kent: textured coating testing and removal, with written paperwork.
- Rented flats before redecoration
- Coatings in the way of electrical work
- Walls before a kitchen or bathroom refit
Asbestos help in Conyer
Artex removal in Conyer
Textured coatings like Artex were used on ceilings and walls for decades, and those applied before 2000 can contain a small amount of asbestos. We test first, then remove the coating with controlled wet methods if needed. People often contact us about coatings already disturbed and coatings damaged by leaks, involving Artex ceilings, coated plasterboard and swirl patterns.
Village homes like those in Conyer have often been altered several times, so ceilings may have been coated during an earlier renovation. You get written paperwork for every job: a report, laboratory results or a waste consignment note, so you have a record.
- Where
- Conyer (ME9)
- Region
- Kent
- Covers
- Textured ceilings and walls
- Afterwards
- Lab result and consignment note
- Quote
- Quoted individually, in writing
- Call
- 07833 053 749
- Page updated
- 26 October 2026
Duty holders and landlords in Conyer
Between tenancies is a good time to deal with asbestos, when rooms are empty and work can be done without disruption.
If your business premises in Conyer were built before 2000, you should have an asbestos register and management plan, and you must tell contractors what’s there.
Why people call us in Conyer
Many ceilings have years of paint on them, so age is hard to judge.
These are some of the things we deal with in Conyer:
- Structural work through coated ceilings
- Flaking textured ceilings
- Coatings damaged by DIY
- Loft conversions
If you’re refurbishing flats near Teynham station, coatings can be tested while the flat is empty.
Comparing quotes
- The scope of the job, in writing
- That licensed work will be done by an HSE-licensed contractor
- What isn’t included
- That samples are analysed by an accredited laboratory
After we have finished in Conyer
The surface is left ready for making good.
Once we are done:
- Send photos of the coatings
- Give us room sizes
- Book your plasterer after removal
- Plan around the closed rooms
Avoid these
Plan testing before the renovation starts.
Do not sand, scrape dry or wire-brush a textured coating before it’s been tested.
Materials we deal with
Patched areas
Different areas may need separate samples.
Painted coatings
Paint often hides the coating, but the coating underneath is the same.
Other services in Conyer
What we do and don’t cover
Here’s what Artex removal covers, and what it does not:
- We leave the surface ready for your plasterer
- We need the room cleared
- Larger-scale steam or gel removal must be notified before it starts, so allow time
Not sure what you need? Send us photos and we’ll tell you honestly.
Materials we see
- Coated plasterboard
- Textured walls
- Patched or painted coatings
- Artex ceilings
- Ceiling roses and cornices (coated)
- Swirl and stipple patterns
How it works
At the end, the room is cleaned and checked before the seals come down. Our team uses the right protective equipment, and use controls to keep dust down.
- Let us know which rooms have textured coatings
- We sample each different coating for testing
- If asbestos is found, we explain the options and quote
- The room is sealed, and the coating removed wet or the boards taken down
- The room is cleaned and the waste goes to a permitted site with paperwork
Getting ready
- Have any previous surveys or test results ready
- Move belongings away from the area, without touching the material
- Let us know where we can park
Get a quote
The quickest way to a quote is to send photos and the postcode: just use our quote form or call 07833 053 749.
Related guides
Options to consider in Conyer
Testing first can save a lot: a clear result means normal methods. How easy the material is to reach affects the price, so photos of the area and the way in help us quote accurately.
Why people choose us
- Quotes that spell out the scope
- Clear advice on your options
- Accredited laboratory results
- Homes, rented property and workplaces
Read how we quote or the cost guide.
Conyer properties and textured coatings
Conyer is about 4 miles east of Sittingbourne, in Kent. We work across Conyer and the surrounding area, on everything from houses and flats to workplaces and garages. Conyer is one of 922 places in Kent we cover. We work right across the region, from Conyer to Canterbury (about 12 miles away).
In older homes in Conyer, textured ceilings were often added in later decades.
We cover Artex jobs across ME9. Local streets include North Quay and Conyer Road; we cover every one. Neighbouring places we cover include Teynham Street (1 mile south-east), Deerton Street (1 mile south-east), Teynham (1 mile south), Norton Ash (2 miles south) and Lewson Street (2 miles south). Larger places within reach include Maidstone (14 miles south-west), Ashford (15 miles south), Canterbury (12 miles south-east), Sittingbourne (4 miles west), Whitstable (9 miles east) and Faversham (4 miles south-east).
Nearby you’ll also find Dolphin Sailing Barge Museum (3.1 miles west) and Castle Rough (2.8 miles west).
What affects the price in Conyer
What drives the price:
- How many samples are needed
- Material and condition
- The size of the job
- Licensed or non-licensed
Compare what each quote includes, not just the total: the scope, the method, the waste and the paperwork.
Photos that help
Photo tips:
- Visible markings
- A closer photo of the material, without touching it
- Where we could park
- Damaged areas
For an accurate quote, tell us what you’ve found, where it is and what you’re planning. Use our quote form or call 07833 053 749.
Common questions in Conyer
Do you cover Conyer and the area around Teynham station?
Yes. Teynham station is about 1.1 miles south of Conyer, and we cover both.
Do you cover small places like Conyer?
Yes. We cover villages and hamlets as well as towns. Tell us about access and parking.
Does weather affect the work?
Indoor jobs go ahead in any weather. Outdoor roof work can be delayed by strong wind or heavy rain.
Can I put asbestos in a skip?
No. Asbestos is hazardous waste and must go to a site that accepts it. When we remove it, it’s taken to a permitted site with a consignment note.
How do I get a quote?
Just send photos through our quote form, or phone 07833 053 749. Tell us the postcode, what the material is and where, and send photos if you can.
How quickly can you come out?
We agree a date when you accept the quote. Some work has to be notified to the enforcing authority first, which affects timing.
Can you come if the asbestos is damaged?
First, keep everyone away and do not clean it up. Then contact us and we will advise on the next step.
Do you cover Conyer?
We do: our area includes Conyer and the places around it. Share the postcode and a short description and we will quote.
- Nothing removed blind: unknown materials are tested first
- Work planned to the Control of Asbestos Regulations 2012 and HSE guidance
- Paperwork for your records: reports, lab results and consignment notes
- Asbestos waste double-bagged or wrapped and taken to a permitted site