A surveyor in a respirator putting a sample of loft material into a sealed bag

Kent · England

Artex Removal in Curteis' Corner

Artex removal in Curteis' Corner, from older homes to workplaces. You get a written quote before anything starts.

  • Textured walls before a refit
  • Coatings damaged by DIY
  • Flaking textured ceilings

Get a quote Phone 07833 053 749

Asbestos help in Curteis' Corner

Textured ceilings in Curteis' Corner

Curteis' Corner is about 10 miles west of Ashford, in Kent. Curteis' Corner has a mix of older and newer buildings, and anything built or refurbished before 2000 can contain asbestos. We cover 922 places across Kent. You can also see our page for Canterbury, about 22 miles away.

Non-domestic buildings like John Mayne Church of England Primary School should already have records of any textured coatings. If you are refurbishing a rental near Headcorn station, a void period is a good time to deal with textured ceilings. Parts of the High Weald National Landscape are within about 6 miles of Curteis' Corner; cottages and farmhouses nearby can have textured coatings too.

We handle Artex jobs in every part of TN27. Whether your property is on Headcorn Road, Smarden Road and Cot Lane or anywhere nearby, we can help. Other places close to Curteis' Corner we cover include Standen (1 mile north-east), Biddenden (1 mile south-west), Lashenden (1 mile north), Stede Quarter (1 mile south-east) and Hareplain (1 mile west). Further out, we also cover Maidstone (11 miles north-west), Ashford (10 miles east), Kings Hill (15 miles north-west), Foley Park (12 miles north-west), Paddock Wood (12 miles west) and Tenterden (4 miles south-east).

Other landmarks nearby include Sissinghurst Castle (3 miles west) and Benenden Hospital (3 miles south-west).

  • Nearby, you will find The Red Lion Inn (0.7 miles south)
Map of Curteis' Corner © OpenStreetMap contributors

Artex removal for Curteis' Corner properties

Planning a renovation in Curteis' Corner with textured ceilings? Get them tested before electricians or plasterers start. From coatings already disturbed and ceilings due to be knocked through or removed, we deal with textured walls, coated ceiling roses and swirl patterns.

Village homes like those in Curteis' Corner have often been altered several times, so coatings may date from earlier work. We work to HSE guidance on every job, large or small.

A sealed sample bag held up by a surveyor
Where
Curteis' Corner (TN27)
County
Kent
Covers
Testing and removal of textured coatings
Afterwards
Lab result and consignment note
Quote
Written quote for your job
Telephone
07833 053 749
Page updated
26 October 2026

Good to know

What’s in and what’s out:

  • The room being worked on has to be empty and sealed off
  • We test before removal, because a clear result means ordinary methods can be used
  • We leave the surface ready for your plasterer

If you are unsure, describe the job and send photos, and we will advise before booking.

Materials we see

  • Textured walls
  • Artex ceilings
  • Ceiling roses and cornices (coated)
  • Swirl and stipple patterns
  • Patched or painted coatings
  • Coated plasterboard

More about this service

Common questions in Curteis' Corner

Do you work near Headcorn station?

Yes, we cover Curteis' Corner and the area towards Headcorn station, about 2.9 miles north.

Do you cover small places like Curteis' Corner?

We do: small villages are covered too. Just tell us how to reach the property.

What does licensed work mean?

It covers the higher-risk materials: lagging, sprayed coatings and most asbestos insulating board. Only a contractor holding an HSE licence can do it.

Could my home contain asbestos?

You can’t tell by eye. Laboratory analysis of a sample gives the answer, and anything from before 2000 is worth checking.

Does weather affect the work?

Indoor work isn’t affected. Outdoor removal may be postponed in strong wind or heavy rain, for safety.

How quickly can you come out?

Dates are agreed once the quote is accepted. Notifiable jobs cannot start until they’ve been notified.

What paperwork will I get?

A survey report, laboratory results or a waste consignment note, depending on the job.

How do I get a quote?

Send us the details: the postcode, what you’ve found and where it is. To do that, fill in the enquiry form or give us a call on 07833 053 749.

Step by step

If we’re taking the boards down instead, they’re removed whole where possible and bagged or wrapped. When we’re done, we explain what happens next and what paperwork follows.

  1. Let us know which rooms have textured coatings
  2. Each coating is sampled and tested
  3. We go through the options and send a quote
  4. The room is sealed, and the coating removed wet or the boards taken down
  5. We clean up and send the waste paperwork

Before we arrive

  • Warn neighbours if needed
  • Tell us about parking and access
  • Find any old asbestos reports

How to get a quote

Share the postcode, a short description and photos: send photos through our quote form, or phone 07833 053 749, and we will reply with a quote.

Tell us what you need

Helpful guides

After we have finished in Curteis' Corner

Covered coatings should be recorded.

After the job, keep these in mind:

  • File the test result and waste note
  • Empty the rooms in advance
  • Plan where you’ll stay or work while rooms are closed off
  • Keep pets out of the work area

Things not to do

If a coating has been damaged by a leak, keep people away from fallen pieces.

Don’t try DIY removal products on untested coatings.

Common reasons for Artex jobs in Curteis' Corner

Leaks and DIY can damage coatings, which can make them crumble.

If any of these sound familiar, it’s worth getting advice:

  • Coatings damaged by leaks
  • Ceilings before downlights go in
  • Loft conversions
  • Structural work through coated ceilings

In older homes in Curteis' Corner, textured ceilings were often added in later decades.

What to look for in a quote

  • What exactly is included: the areas, materials or samples
  • Laboratory analysis by an accredited lab
  • How fibres will be kept down
  • Proof of an HSE licence where it’s needed

How to choose an asbestos contractor

Your options compared

Skimming over Artex is an option, but never sand it first, and it remains in place. Very low prices can mean corners are being cut: controls, protective equipment, laboratory fees and legal disposal all cost money.

Why choose us

  • Quotes that spell out the scope
  • Work planned to HSE guidance and the regulations
  • Samples analysed by an accredited laboratory
  • Honest advice, even when the answer is to leave it

Take a look at how we price jobs or the cost guide.

For landlords, agents and businesses

Schools, halls and community buildings are non-domestic premises, so whoever runs them has a duty to manage asbestos.

Before contractors start, they need to know about any asbestos. HSE’s campaigns stress this point to building owners and trades alike.

Should you do it yourself?

Asbestos waste can’t go in household bins, recycling or skips. It must go to a permitted site; check with your council about small amounts.

Power tools, sanding and jet-washing release the most fibres, so avoid them completely.

What it costs

The cost depends on:

  • The survey scope
  • How much waste there is
  • Location, parking and any London charges
  • Material and condition

Compare what each quote includes, not just the total: scope, method, waste disposal and paperwork.

Helping us quote

Before you send photos, a few tips:

  • Cracks or breaks
  • The access route
  • Any labels or markings, if you can see them safely
  • A picture of the whole area

Photos from a safe distance help: don’t touch the material, just send them through our quote form.

  • Survey or test first when it isn’t clear what a material is
  • Done to the regulations: HSE guidance and CAR 2012
  • Everything in writing: quotes, reports, results and waste notes
  • Legal disposal at a permitted site, with a consignment note

How it works · Licensed or non-licensed? · Get a quote