Kent · England
Asbestos Artex Removal in Denton, Kent
Artex removal in Denton: testing and removal of Artex and textured coatings. Send us photos and we will tell you what you need.
- Extensions that cut into ceilings
- Ceilings before skimming
- Textured walls before a refit
Asbestos help in Denton
Where asbestos turns up
Older coatings are often painted over many times, which can make them look newer than they are.
Common situations in older properties include:
- Landlord refurbishments
- Coatings damaged by leaks
- Ceilings due for plastering or skimming
- Coatings in the way of electrical work
In older homes in Denton, textured ceilings were often added in later decades.
What to look for in a quote
- How fibres will be kept down
- Any exclusions
- Waste disposal and the consignment note
- Which laboratory analyses samples
Artex removal near Denton
If your renovation in Denton involves textured ceilings, get them tested before electricians or plasterers start. Common materials are textured walls, coated plasterboard and stipple finishes, and typical jobs are ceilings before skimming and extensions that cut into ceilings.
In a village like Denton, textured coatings turn up in cottages and later homes alike, often added during past renovations. Every quote is in writing and spells out what’s covered, so there are no surprises.

- Area
- Denton (CT4)
- Area hub
- Kent
- Service
- Artex tested, then removed with wet methods
- Paperwork
- Test result and waste paperwork
- Price
- Quoted individually, in writing
- Call
- 07833 053 749
- Last updated
- 26 October 2026
The process
At the end, the room is cleaned and checked. Before we leave, we explain what we did and what comes next.
- Let us know which rooms have textured coatings
- We sample each different coating for testing
- We go through the options and send a quote
- The room is sealed, and the coating removed wet or the boards taken down
- The room is cleaned and the waste goes to a permitted site with paperwork
Preparing for the visit
- Ensure we can get to the area
- Warn neighbours if needed
- Keep children and pets away on the day
Get a quote
We quote each job individually, because no two are the same. To start, ring 07833 053 749, or send the details through our contact page.
Helpful guides
Artex removal around Denton
Denton is about 6 miles north-west of Dover, in Kent. Homes, landlords and businesses in Denton contact us for Artex jobs about all kinds of jobs. We work in 922 places across Kent, from the larger towns to small villages. Our nearest city page is Canterbury, about 8 miles away.
If you’re refurbishing flats near Shepherds Well station, a void period is a good time to deal with textured ceilings. Parts of the Kent Downs National Landscape are within about 4 miles of Denton; cottages and farmhouses nearby can have textured coatings too.
This part of Kent takes in CT4. From The Street and Canterbury Road or anywhere nearby, the process is the same. Neighbouring places we cover include Lodge Lees (1 mile west), Wootton (1 mile south-east), Shelvin (1 mile east), Breach (1 mile west) and Selsted (2 miles south). Within a short drive, we also work in Ashford (13 miles west), Canterbury (8 miles north-west), Dover (6 miles south-east), Folkestone (7 miles south), Ramsgate (15 miles north-east) and Whitstable (13 miles north-west).
Green spaces nearby include Cheriton Hill.
- Local pubs include The Jackdaw Inn (within half a mile south-east)
What’s included, and what is not
So you know what to expect:
- We leave the surface ready for your plasterer
- Big jobs need notifying in advance, which affects the start date
- Other materials may need their own approach
If you’re unsure, describe the job and send photos, and we will advise.
What we deal with
- Artex ceilings
- Ceiling roses and cornices (coated)
- Swirl and stipple patterns
- Patched or painted coatings
- Textured walls
- Coated plasterboard
What affects the price in Denton
What changes the cost:
- The category of work
- Access to the area
- How many samples are needed
- The type of material and its condition
Doing several things in one visit can help, such as testing several materials at once.
Sending photos
Photo tips:
- How we’d reach it
- An overall view
- A rough size or measurement
- A close-up from a safe distance
Photos from a safe distance help: do not touch the material, just send them through our quote form.
Your options compared
Skimming over Artex is an option, but never sand it first, and it remains in place. A test can sometimes save the cost of removal altogether, if the material turns out not to contain asbestos.
How we work in Denton
- Houses, flats and business premises
- Legal disposal, with paperwork
- Covering London and the South East
- Accredited laboratory results
Take a look at how we price jobs or published price ranges.
Nearby places to Denton
More for properties in Denton
What happens next
Covered coatings should be recorded.
To avoid problems in future:
- Line up the plasterer for afterwards
- Photos help us quote
- Test every different coating
- Keep pets away
Avoid these
Do not use a steamer or chemical stripper on an untested coating.
Keep away from flaking or fallen coating.
Landlords, managing agents and employers
If you own a block of garages or outbuildings that you let should find out whether the roofs are asbestos cement, before anyone carries out repairs.
If you manage or own a block in Denton, the asbestos register for common parts should be kept up to date and shared with contractors, and condition checked regularly.
Should you do it yourself?
HSE’s advice to the public is not to try to repair or remove asbestos yourself. Higher-risk materials such as lagging, sprayed coatings and most insulating board must only be dealt with by an HSE-licensed contractor.
A professional job comes with paperwork: results, a report or a consignment note, which buyers and builders may ask for.
Your questions about Artex removal in Denton
Is asbestos common in Denton homes?
It depends on its age and history: asbestos was used until the 1999 ban, so older homes and older alterations in Denton can contain it. Common places include garage roofs, textured ceilings, floor tiles, soffits and flues.
Do you work near Shepherds Well station?
Yes. Shepherds Well station is about 2.7 miles east of Denton, and we cover both.
Does weather affect the work?
Indoor work is not affected. Outdoor removal may be postponed in strong wind or heavy rain, for safety.
Do I need a test or a survey?
A test checks specific materials; a survey checks a whole building or work area. For building work, a survey is normally needed.
Can I just skim over it?
It’s an option for an intact coating: covering it leaves it undisturbed. Do not sand it first, and keep a record that it’s there.
Do you need a licence to remove Artex?
Normally not, according to HSE. Larger steam or gel jobs must be notified first.
Should I check for asbestos before buying?
Yes, a pre-purchase survey can help, with the seller’s permission.
Do you need to see it before quoting?
Clear photos and measurements are often enough; if not, we’ll arrange to see it.
- Nothing removed blind: unknown materials are tested first
- Planned to HSE guidance and the Control of Asbestos Regulations 2012
- Written paperwork: reports, results and waste consignment notes
- Waste sealed and labelled, then taken to a permitted site