A surveyor in a respirator putting a sample of loft material into a sealed bag

West Sussex · England

Artex Removal for Felpham

Artex removal across Felpham, for houses, flats and commercial buildings. You get a written quote before anything starts.

  • Coatings scraped during DIY
  • Loft conversions
  • Flaking textured ceilings

Request a quote Ring 07833 053 749

Artex removal for Felpham

About our artex removal in Felpham

For an asbestos coating, the room is sealed, the coating kept wet and nothing sanded or dry-scraped, with the waste bagged and taken to a permitted site. From walls before tiling and coatings damaged by leaks, we deal with swirl patterns, textured walls and Artex ceilings and more.

Homes in areas like Felpham may have textured ceilings in several rooms, so test each different coating. Clear answers come first: is it asbestos, and what should you do about it.

Notes being made on a tablet indoors
Area
Felpham (PO22, PO21)
Region
West Sussex
Service
Artex tested, then removed with wet methods
Afterwards
Test result and waste paperwork
Quote
Written quote for your job
Phone
07833 053 749
Page updated
26 October 2026

Limits to be aware of

A few things to be aware of:

  • Other asbestos materials found in the room are dealt with separately
  • We test before removal, because a clear result means ordinary methods can be used
  • Plastering and making good are typically separate jobs

If you’re unsure, describe the job and send photos, and we will advise before you book.

Materials we see

  • Ceiling roses and cornices (coated)
  • Coated plasterboard
  • Textured walls
  • Artex ceilings
  • Swirl and stipple patterns
  • Patched or painted coatings

More about this service

Duty holders and landlords in Felpham

Before maintenance in a rented home, agents may ask about asbestos. A test or a survey gives everyone a clear answer.

Duty holders for workplaces and the shared parts of flats in Felpham must manage asbestos under regulation 4 of the Control of Asbestos Regulations 2012. That means finding it, assessing it, recording it and planning how to manage it.

Felpham: your questions answered

Do you work near Bognor Regis station?

Yes, we cover Felpham and the area towards Bognor Regis station, about 1 mile west.

Is the Artex in my Felpham home asbestos?

Some may, but many coatings do not contain asbestos. Only a test will tell you.

Do you need to see it before quoting?

Many jobs can be quoted from photos, but larger or unclear jobs may need a visit.

Does someone need to be there?

Someone has to let us into all the areas in the job.

Do you give written quotes?

Yes, every quote is in writing and says what’s included.

Do I need a test or a survey?

Testing covers particular materials, while a survey covers everything in scope. For building work, a survey is usually needed.

How do I get a quote?

Start with the postcode and a description of the material, with photos if possible. Then use our quote form or call 07833 053 749.

Can asbestos go in my bin?

No: skips and household bins can’t take asbestos. It has to go to a site that accepts it, with the right paperwork.

Why people call us in Felpham

Most problems come during renovation: sanding, dry scraping or drilling.

These come up again and again:

  • Rented homes refurbished between tenants
  • Extensions that cut into ceilings
  • Walls before a kitchen or bathroom refit
  • Coatings damaged by leaks

For a school such as Felpham Community College, the duty holder’s records should show any coatings.

Questions to ask before booking

  • The method and controls
  • Whether VAT is included
  • What category of work it is
  • Proof of an HSE licence where it’s needed

What to check before you book

DIY and asbestos

Working on a fragile asbestos cement roof is dangerous in itself, as well as an asbestos risk, so never climb onto one.

If you do find something during DIY, stop: keep people away, don’t sweep or vacuum it up, and get advice.

Your options compared

Testing first can save a lot: a clear result means normal methods. A price that looks too good to be true often is: proper controls, lab analysis and legal waste disposal cost money.

How we work in Felpham

  • Identify first, remove only when needed
  • Samples analysed by an accredited laboratory
  • Written quotes that say what’s included
  • Legal disposal, with paperwork

Take a look at how we quote and the cost guide.

After the job

If you’ve covered a coating rather than removed it, record where it is.

Once you know what’s there, a few simple habits help:

  • Each different coating needs testing
  • File the test result and waste note
  • Clear the rooms before the work
  • Photos help us quote

Things not to do

Never sand or dry-scrape Artex before testing.

Plan testing before the renovation starts.

The process

We soften the coating and take it off by hand, never sanded or scraped dry. We wear suitable protective equipment for the job, and use controls to keep dust down.

  1. Tell us where the textured ceilings and walls are
  2. We sample each different coating for testing
  3. If asbestos is found, we explain the options and quote
  4. The room is sealed, and the coating removed wet or the boards taken down
  5. The room is cleaned and the waste goes to a permitted site with paperwork

Before we arrive

  • Dig out previous surveys
  • Move belongings away from the area, without touching the material
  • Let us know where we can park

Getting a price

Tell us about the material, its location and your plans. Send photos through our quote form, or phone 07833 053 749.

Ask for a quote

Related guides

Textured ceilings in Felpham

Felpham is about 1 mile east of Bognor Regis, in West Sussex. For Artex jobs in Felpham, tell us about parking and access. We work in 371 places in West Sussex, from the larger towns to small villages. You can also see our page for Brighton, about 23 miles away.

If you’re refurbishing flats near Bognor Regis station, a void period is a good time to deal with textured ceilings. If your home is one of the older properties in Felpham, near Church of St Mary or elsewhere, textured ceilings may date from an earlier renovation. The coast is within about a mile of Felpham, though indoor coating work goes ahead whatever the weather.

Artex jobs anywhere in PO22 and PO21 start with the postcode and some photos. That could mean a property on Sea Road, Ley Road and Limmer Lane. Neighbouring places we cover include South Bersted (1 mile west), Flansham (1 mile north-east), Bognor Regis (1 mile west), Middleton-on-Sea (2 miles east) and Shripney (2 miles north-west). Further out, we also cover Worthing (11 miles east), Chichester (6 miles north-west), Selsey (7 miles south-west), Littlehampton (6 miles east), Lancing (15 miles east) and Emsworth (13 miles west).

Well-known places in the area include Bognor Regis Museum (1.2 miles south-west) and Bognor Regis War Memorial Hospital (1 mile west).

  • Schools near Felpham include Downview Primary School (0.5 miles north)
  • Nearby, you’ll find The Thatched House (less than half a mile south-east)
Map of Felpham © OpenStreetMap contributors

Materials, one by one

Artex ceilings

Swirl, stipple and other patterns on ceilings are the most common textured coatings.

Patched areas

Patch repairs may use a different material from the original coating.

  • Nothing removed blind: unknown materials are tested first
  • Done to the regulations: HSE guidance and CAR 2012
  • Paperwork for your records: reports, lab results and consignment notes
  • Legal disposal at a permitted site, with a consignment note

How it works · Licensed or non-licensed? · Get a quote