A surveyor in a respirator putting a sample of loft material into a sealed bag

Kent · England

Artex Removal for Finberry

Artex removal across Finberry and nearby, for homes, rented property and workplaces. Done to HSE guidance, with paperwork for your records.

  • Walls before tiling
  • Rented flats before redecoration
  • Coatings damaged by leaks

Get a quote Ring 07833 053 749

Artex removal around Finberry

Finberry is about 2 miles south-east of Ashford, in Kent. Wherever your property is in Finberry, tell us the postcode and what you need, and we will quote. We work in all 922 towns and villages across Kent. Our nearest city page is Canterbury, about 14 miles away.

For rented flats close to Ashford International station, textured ceilings can be tested between tenancies. A school like Finberry Primary School should know from its asbestos register whether coatings have been tested, before decorators start. Parts of the Kent Downs National Landscape are within about 5 miles of Finberry; cottages and farmhouses nearby can have textured coatings too.

Wherever your property is in TN25, Artex removal is available, from busy streets to quiet lanes. Local streets include Swift Avenue, Harrier Drive and Nuthatch Drive; we cover every one. If your property is just outside Finberry, we also cover Cheeseman's Green (1 mile south), South Willesborough (1 mile north), Park Farm (1 mile west), Newtown (1 mile north-west) and Kingsnorth (1 mile west). Further out, we also cover Canterbury (14 miles north-east), Folkestone (12 miles east), Faversham (14 miles north), Hythe (9 miles east), Davington (14 miles north) and Preston (13 miles north).

Nearby you will also find William Harvey Hospital (1.9 miles north-east) and Ashford Designer Outlet (1.5 miles north-west). Within reach you’ll find Hatch Park.

  • Nearby schools include John Wallis Academy (1.8 miles north-west)
Map of Finberry © OpenStreetMap contributors

Artex removal near Finberry

For an asbestos coating, the room is sealed, the coating kept wet and nothing sanded or dry-scraped, with the waste bagged and taken to a permitted site. People often contact us about flaking textured ceilings and coatings scraped during DIY, involving stipple finishes, Artex ceilings and coated ceiling roses.

Village homes like those in Finberry have often been altered several times, so coatings may date from earlier work. Nothing is added to the job that you don’t need, and we’ll say when the right answer is to leave something alone.

Waste being bagged by workers in full protective equipment
Area
Finberry (TN25)
Area hub
Kent
Service
Textured ceilings and walls
Afterwards
Test result and waste paperwork
Price
A written quote before work starts
Call
07833 053 749
Last updated
26 October 2026

Options to consider in Finberry

DIY removal products are sold for textured coatings, but if it contains asbestos, the job needs proper controls. Test first. There is no one-size price, as every job differs. Our guides list published price ranges from other companies, with sources.

Why people choose us

  • Lab analysis by an accredited laboratory
  • Paperwork you can show your buyer, landlord or builder
  • Work done to the regulations
  • Across London and the South East

See our prices page and the cost guide.

FAQs for Finberry

Do textured ceilings in Finberry homes contain asbestos?

Some older coatings do, and many do not. Testing a sample is the only way to know.

Do you cover small places like Finberry?

Yes. We cover villages and hamlets as well as towns. Just tell us how to reach the property.

What if the weather’s bad?

That depends: indoor jobs are not affected, but outdoor removal may be rescheduled for safety.

How do I get a quote?

Ring 07833 053 749, or send the details through our contact page. Include the postcode, a description and photos.

Do you work for landlords and businesses?

Yes, as well as homeowners. Send the details.

Do you need a licence to remove Artex?

Normally not: HSE’s code of practice says textured coating work is not normally licensable, but larger-scale steam or gel removal must be notified first.

Does asbestos always have to come out?

Not always: sound material that won’t be disturbed can often stay. It should be recorded and checked.

Can I put asbestos in a skip?

No. Asbestos is hazardous waste and must go to a site that accepts it. We take it to a permitted site with paperwork.

Typical Artex jobs in Finberry

Many trades want a test result first.

These are some of the things we deal with in Finberry:

  • Structural work through coated ceilings
  • Loft conversions
  • Ceilings before skimming
  • Coatings damaged by leaks

In older homes in Finberry, textured ceilings were often added in later decades.

Before booking anyone

  • What paperwork you get
  • Where the waste goes, with paperwork
  • What exactly is included: the areas, materials or samples
  • What isn’t included

Read the checklist

How we work

We wear disposable coveralls and suitable respirators, and the room stays closed. The work area is kept clear while we’re working.

  1. Tell us which rooms and surfaces
  2. We sample each coating
  3. We plan the removal and send a quote
  4. The coating is removed with controls
  5. We clean up and send the waste paperwork

Preparing for the visit

  • Mention any damage before we arrive
  • Make sure pets and children are elsewhere
  • Let us know where we can park

Ask for a quote

Every job is quoted in writing. Ring 07833 053 749, or send the details through our contact page with the details, including any survey or test you already have.

Ask for a quote

Related guides

Landlords, managing agents and employers

For managing agents and freeholders in Finberry, the asbestos register for common parts should be kept up to date and shared with contractors.

Community buildings count as non-domestic premises, so whoever runs them has a duty to manage asbestos.

Good to know

We’re upfront about what’s included:

  • Other materials may need their own approach
  • Plastering and making good are normally separate jobs
  • Untested coatings are tested first, because a clear result means ordinary methods can be used

Not sure what you need? Send us photos and we will tell you honestly before booking.

Materials in Finberry

  • Coated plasterboard
  • Swirl and stipple patterns
  • Patched or painted coatings
  • Textured walls
  • Ceiling roses and cornices (coated)
  • Artex ceilings

Service details

How we price Artex removal

What drives the price:

  • How much there is
  • Whether the work is non-licensed, notifiable or licensed
  • Location, parking and any London charges
  • The type of material and its condition

Our quotes are clear about VAT.

Photos that help

Photos often save us a visit:

  • Any damage, cracks or broken pieces
  • The route in: gates, steps, stairs or the loft hatch
  • A closer photo of the material, without touching it
  • A wide shot showing where the material is

If you have a survey or test result, include it when you use our quote form or call 07833 053 749.

What happens next

If you’ve covered a coating rather than removed it, record where it is.

Going forward:

  • Keep the results and paperwork
  • Empty the rooms in advance
  • Give us room sizes
  • Each different coating needs testing

Avoid these

Keep away from flaking or fallen coating.

Do not try DIY removal products on untested coatings.

A closer look at the materials

Artex ceilings

Swirl, stipple and other patterns on ceilings are the most common textured coatings.

Ceiling roses and cornices

Decorative mouldings are sometimes coated too.

  • Nothing removed blind: unknown materials are tested first
  • Work planned to the Control of Asbestos Regulations 2012 and HSE guidance
  • Paperwork for your records: reports, lab results and consignment notes
  • Asbestos waste double-bagged or wrapped and taken to a permitted site

How it works · Licensed or non-licensed? · Get a quote