Kent · England
Artex Removal in Four Elms
Found something that might be asbestos in Four Elms? Our service covers textured coating testing and removal, with clear advice at each step.
- Flaking textured ceilings
- Coatings in the way of electrical work
- Loft conversions and extensions
Artex removal near Four Elms
About our artex removal in Four Elms
Sometimes it’s simpler to take the ceiling boards down whole than to strip the coating. We’ll talk you through the options for your rooms in Four Elms. We often deal with swirl patterns, Artex ceilings and coated ceiling roses, and typical jobs are coatings already disturbed and loft conversions and extensions.
In a village like Four Elms, textured coatings turn up in cottages and later homes alike. Not sure what you need? Just ask: we will recommend a test, a survey or removal, whichever fits.
- Where
- Four Elms (TN8)
- Region
- Kent
- Service
- Testing and removal of textured coatings
- Paperwork
- Result and waste note
- Price
- A written quote before work starts
- Call
- 07833 053 749
- Page updated
- 26 October 2026
Options to consider in Four Elms
Strip the coating or take the boards down? Stripping keeps the ceiling; taking boards down whole can be quicker and cleaner in some rooms. A test can sometimes save the cost of removal altogether, because the material is clear.
How we work in Four Elms
- Written quotes that say what’s included
- Legal disposal, with paperwork
- Honest advice, even when the answer is to leave it
- Jobs planned to HSE guidance
Read how we quote or our cost guide.
The scope of Artex removal
It’s worth knowing what Artex removal does and does not cover:
- Other materials may need their own approach
- Big jobs need notifying in advance, so allow time
- We need the room cleared
Not sure what you need? Send us photos and we will tell you honestly.
Materials we see
- Artex ceilings
- Patched or painted coatings
- Textured walls
- Ceiling roses and cornices (coated)
- Coated plasterboard
- Swirl and stipple patterns
Textured ceilings in Four Elms
Four Elms is about 6 miles south-west of Sevenoaks, in Kent. Properties in Four Elms range from older houses to newer estates and commercial buildings, and anything built or refurbished before 2000 can contain asbestos. We cover 922 places in Kent. Our area stretches from Four Elms to Crawley (14 miles away).
Older homes across Four Elms may have coatings added during past renovations. If you’re refurbishing flats near Edenbridge station, a void period is a good time to deal with textured ceilings.
We carry out Artex jobs all over TN8 and the streets around it. Streets in the area include Pootings Road, Styles Close and Four Elms Road, and Artex removal is available on all of them. Neighbouring places we cover include Pootings (1 mile north-west), Mowshurst (1 mile south-west), Puddledock (2 miles north), Marlpit Hill (2 miles west) and Edenbridge (2 miles south-west). Further out, we also cover Sevenoaks (6 miles north-east), Royal Tunbridge Wells (9 miles south-east), Tonbridge (8 miles east), Swanley (13 miles north), Kings Hill (14 miles east) and Paddock Wood (13 miles east).
Nearby you’ll also find Hever Castle (2.2 miles south) and Haxted Watermill Museum (3.4 miles south-west). Green spaces nearby include Dryhill Nature Reserve.
- Local pubs include The Four Elms Public House (within half a mile south-east)
For businesses and landlords in Four Elms
Landlords of single homes do not have the same duty to manage as non-domestic duty holders, but anyone working on the property still needs to know about asbestos.
If you manage or own a block in Four Elms, the register for shared areas needs keeping current and sharing with trades, and condition checked regularly.
Questions from Four Elms
Do textured ceilings in Four Elms homes contain asbestos?
Some older coatings do, and many do not. Only a test will tell you.
How far is Four Elms from London?
Four Elms is about 21 miles from central London, well within our area.
Do I get anything in writing afterwards?
A survey report, laboratory results or a waste consignment note, depending on the job.
Which asbestos work needs a licence?
It covers the higher-risk materials: pipe lagging, sprayed coatings and most insulating board. It needs a contractor with an HSE licence.
What’s the difference between a test and a survey?
Testing covers particular materials, while a survey covers everything in scope. For building work, a survey is normally needed.
How dangerous is asbestos?
Breathing in asbestos fibres can cause serious diseases, often decades later. The risk comes mainly from disturbing materials that contain it, which is why identifying it first matters.
Do you work on commercial premises?
We do, alongside homes. Non-domestic premises have a duty holder who should hold an asbestos register.
Can I just skim over it?
It’s an option for an intact coating: skimming or boarding over avoids disturbing it. Do not sand it first, and keep a record that it’s there.
Why people call us in Four Elms
Many trades want a test result first.
Get advice if you are dealing with any of these:
- Rented flats before redecoration
- Ceilings before downlights go in
- Ceilings coming down
- Coatings damaged by leaks
Non-domestic buildings like Four Elms Primary School should already have records of any textured coatings, before decorators start.
Comparing quotes
- Laboratory analysis by an accredited lab
- How the work will be done, and the controls used
- Whether they’re insured for asbestos work
- Waste disposal and the consignment note
Looking after things afterwards
The ceiling or wall is left ready for your plasterer.
Staying safe afterwards:
- Keep pets out of the work area
- Tell us which rooms and roughly how big they are
- Keep the results and paperwork
- Each different coating needs testing
What to avoid
If a coating has been damaged by a leak, keep people away from fallen pieces and ask for advice.
Plan testing before the renovation starts.
Places near Four Elms
A closer look at the materials
Textured walls
Walls can have textured coatings too.
Painted coatings
We sample through the paint into the coating.
What happens
We soften the coating and take it off by hand, never sanded or scraped dry. If anything unexpected turns up, we stop and talk to you.
- Tell us which rooms and surfaces
- We sample each coating
- If it contains asbestos, we agree the method and quote
- The coating is removed with controls
- The room is cleaned and you get the paperwork
Before we arrive
- Tell us about anything that is already damaged
- Move things out of the way carefully
- Keep the area clear of children and pets
DIY and asbestos
Power tools, sanding and jet-washing release the most fibres, so avoid them completely.
HSE’s advice to the public is not to try to repair or remove asbestos yourself. Higher-risk materials such as lagging, sprayed coatings and most insulating board must only be dealt with by an HSE-licensed contractor.
- Identify it first: we test or survey before planning removal
- Work planned to the Control of Asbestos Regulations 2012 and HSE guidance
- Written paperwork: reports, results and waste consignment notes
- Asbestos waste double-bagged or wrapped and taken to a permitted site