A surveyor in a respirator putting a sample of loft material into a sealed bag

Surrey · England

Asbestos Artex Removal in Hammer, Surrey

Artex removal in Hammer and across Surrey: removal of textured ceilings and walls, with written paperwork.

  • Coatings damaged by DIY
  • Damaged or cracked coatings
  • Extensions that cut into ceilings

Ask for a quote Call 07833 053 749

Asbestos help in Hammer

How artex removal works in Hammer

HSE’s code of practice says work on textured coatings will not normally be licensable. Larger-scale removal using steam or gel is notifiable non-licensed work. We often deal with coated plasterboard, swirl patterns and stipple finishes, and typical jobs are ceilings before downlights go in and structural work through coated ceilings.

Village homes like those in Hammer have often been altered several times, so ceilings may have been coated during an earlier renovation. You get written paperwork for every job: a report, laboratory results or a waste consignment note, for your records.

Where
Hammer (GU27)
Region
Surrey
What we do
Artex tested, then removed with wet methods
You receive
Result and waste note
Quote
Quoted individually, in writing
Telephone
07833 053 749
Updated
26 October 2026
A surveyor in a respirator and gloves making notes on a tablet in a utility room

Duty holders and landlords in Hammer

If you run a business from older premises in Hammer, you should have an asbestos register and management plan, and you must tell contractors what’s there.

Between tenancies is a good time to deal with asbestos, while the property is empty.

What it costs

The price of Artex removal depends mainly on:

  • The type of material and its condition
  • How many samples are needed
  • The quantity or area
  • How much waste there is

A price that looks too good to be true often is: proper controls, lab analysis and legal waste disposal cost money.

Sending photos

Before you send photos, a few tips:

  • Cracks or breaks
  • Where we could park
  • Any labels or markings, if you can see them safely
  • An overall view

Photos from a safe distance help: send them through our contact page.

Why people call us in Hammer

People used Artex to cover cracks and uneven ceilings, and some included a little chrysotile.

Common situations in older properties include:

  • Loft conversions
  • Textured walls before a refit
  • Ceilings due for rewiring or new downlights
  • Damaged or cracked coatings

In older homes in Hammer, textured ceilings were often added in later decades.

What your quote should include

  • How fibres will be kept down
  • What is not included
  • What category of work it is
  • Insurance appropriate to asbestos work

How to choose an asbestos contractor

Textured ceilings in Hammer

Hammer is about 9 miles south of Farnham, in Surrey. For Artex jobs in Hammer, tell us about parking and access. Hammer is one of 395 towns and villages in Surrey where we work. You can also see our page for Guildford, about 14 miles away.

Non-domestic buildings like Woolmer Hill School should already have records of any textured coatings. For rented flats close to Haslemere station, coatings can be tested while the flat is empty. Hammer is within about 3 miles of the Surrey Hills National Landscape; cottages and farmhouses nearby can have textured coatings too.

Anywhere in GU27, we can help with Artex removal. Streets in the area include Hammer Lane, Moor Road and Copse Road, and Artex removal is available on all of them. Neighbouring places we cover include Woolmer Hill (1 mile south), Hammer Bottom (1 mile west), Shottermill (1 mile east), Bramshott Chase (1 mile north) and Linchmere (1 mile south-west). Within a short drive, we also work in Guildford (14 miles north-east), Farnham (9 miles north), Cranleigh (12 miles east), Ash (11 miles north), Godalming (9 miles north-east) and Farncombe (10 miles north-east).

Well-known places in the area include Haslemere and District Hospital (2 miles east). The countryside around Hammer includes Lynchmere Commons and Wheeler's Down.

  • Local schools include Camelsdale Primary School (0.7 miles east)
  • Local pubs include The Prince of Wales pub (within half a mile west)
Map of Hammer © OpenStreetMap contributors

Your options compared

Skimming over Artex avoids disturbing it, but do not sand it smooth first, and the asbestos stays in the building. There is no one-size price, as every job differs. Our guides list published price ranges from other companies, with sources.

Why us?

  • Clear written quotes
  • Waste taken to a permitted site with a consignment note
  • Records for your files
  • Homes, rented property and workplaces

Take a look at our prices page or the cost guide.

FAQs for Hammer

Do you come out to small villages like Hammer?

Yes. We cover villages and hamlets as well as towns. Tell us about access and parking.

Can you deal with asbestos on rural buildings in the Surrey Hills National Landscape?

Yes, the same rules apply there, but access to farm and rural buildings can take planning.

Can you help with a shop or office?

Yes. Send us the details of the premises, and any existing asbestos register.

What does it cost to remove Artex?

It depends on the area, the method and the waste, so we quote after testing.

Do you need a licence to remove Artex?

Normally not: HSE treats textured coating work as normally non-licensed, though large steam or gel jobs are notifiable.

Can I just skim over it?

Skimming or boarding over an intact coating avoids disturbing it, but do not sand it first, and record that it’s there.

Do I need to move out during Artex removal?

The room being worked on has to be empty and sealed off. You may be able to use the rest of the house.

What if the weather’s bad?

Indoor jobs go ahead in any weather. Outdoor roof work can be delayed by strong wind or heavy rain.

DIY and asbestos

Never put asbestos in a bin or skip. It has to go to a site that accepts it, and some councils accept small amounts from residents by arrangement.

HSE’s advice to the public is not to try to repair or remove asbestos yourself. Licensed materials are strictly for licensed contractors.

What happens

We soften the coating and take it off by hand, with no sanding or dry scraping. We arrive at the agreed time, check the area and explain what we’ll do before we start.

  1. Get in touch with photos
  2. We arrange testing
  3. We explain your options: leave, cover or remove
  4. We carry out the removal
  5. We dispose of the waste legally

How to prepare

  • Let neighbours know if the work is near them
  • Mention any parking restrictions
  • Move belongings away from the area, without touching the material

Ask for a quote

Unsure whether you need a test, a survey or removal? Use our quote form or call 07833 053 749, and we will recommend the right option.

Tell us what you need

Read more

Materials, one by one

Ceiling roses and cornices

Roses and cornices may be coated.

Patched areas

Patch repairs may use a different material from the original coating.

The scope of Artex removal

It’s worth knowing what Artex removal does and doesn’t cover:

  • We need the room cleared
  • Other asbestos materials found in the room are dealt with separately
  • We leave the surface ready for your plasterer

Not sure what you need? Send us photos and we’ll tell you honestly before booking.

Materials in Hammer

  • Coated plasterboard
  • Textured walls
  • Ceiling roses and cornices (coated)
  • Artex ceilings
  • Swirl and stipple patterns
  • Patched or painted coatings

Service details

  • Identify it first: we test or survey before planning removal
  • Done to the regulations: HSE guidance and CAR 2012
  • Written paperwork: reports, results and waste consignment notes
  • Asbestos waste double-bagged or wrapped and taken to a permitted site

How it works · Licensed or non-licensed? · Get a quote