Kent · England
Artex Removal for Hoppers Corner
Artex removal across Hoppers Corner and nearby. Done to HSE guidance, with paperwork for your records.
- Walls before tiling
- Extensions that cut into ceilings
- Coatings in the way of electrical work
Artex removal for Hoppers Corner
Hoppers Corner questions
Do you work near East Farleigh station?
Yes, we cover Hoppers Corner and the area towards East Farleigh station, about 0.9 miles east.
Do you cover small places like Hoppers Corner?
Yes. We cover villages and hamlets as well as towns. Just tell us how to reach the property.
Is it OK to scrape off Artex?
Only once you know it’s clear. If it contains asbestos, sanding releases fibres.
What if asbestos is found during building work?
Work in that area should stop, and the material needs identifying before work resumes.
Do you need a licence to remove Artex?
Normally not, according to HSE. Larger-scale removal using steam or gel is notifiable non-licensed work.
Does asbestos always have to come out?
No. Material in good condition that won’t be disturbed can often be left and managed. Keep a record and check its condition.
When can you start?
Dates are agreed once the quote is accepted. Some work has to be notified to the enforcing authority first, which affects timing.
Does all Artex contain asbestos?
Not every coating does: many coatings are asbestos-free. Testing a sample is how you find out.
Artex removal near Hoppers Corner
For an asbestos coating, the room is sealed, the coating kept wet and nothing sanded or dry-scraped, with the waste bagged and taken to a permitted site. People often contact us about ceilings before skimming and coatings damaged by leaks, including coated ceiling roses, Artex ceilings and stipple finishes.
Village homes like those in Hoppers Corner have often been altered several times, so ceilings may have been coated during an earlier renovation. Everything is explained in plain English, including when it’s better to leave a material in place.
- Location
- Hoppers Corner (ME15)
- Region
- Kent
- Service
- Artex tested, then removed with wet methods
- Afterwards
- Test result and waste paperwork
- Price
- Written quote for your job
- Telephone
- 07833 053 749
- Last updated
- 26 October 2026
Looking after things afterwards
If other rooms have textured coatings, record whether they’ve been tested, for future work.
If asbestos stays in the building:
- Each different coating needs testing
- Send photos of the coatings
- Clear the rooms before the work
- Book your plasterer after removal
Things not to do
Do not try DIY removal products on untested coatings.
Never sand or dry-scrape Artex before testing.
What happens
The coating is softened with water, steam or gel and removed with hand tools, never sanded or scraped dry. Before we leave, we explain what we did and what comes next.
- Get in touch with photos
- We test a sample of each coating
- We explain your options: leave, cover or remove
- We remove it safely if that’s what you choose
- We dispose of the waste legally
How to prepare
- Let us know if something’s broken
- Leave the suspect material alone until we arrive
- Warn neighbours if needed
Getting a price
Photos taken from a safe distance are fine: don’t touch the material, just send them through our quote form.
Related guides
Weighing up your options
DIY removal products are sold for textured coatings, but if it contains asbestos, the job needs proper controls. Test first. Access makes a big difference to cost, so tell us about access.
What you get
- London, Kent, Surrey, Sussex and beyond
- We identify first and remove only what needs removing
- Domestic and commercial work
- Legal disposal, with paperwork
Read our prices page and our cost guide.
Good to know
It’s worth knowing what Artex removal does and does not cover:
- Other asbestos materials found in the room are dealt with separately
- We need the room cleared
- Plastering and making good are normally separate jobs
Not sure what you need? Send us photos and we’ll tell you honestly.
Materials in Hoppers Corner
- Patched or painted coatings
- Ceiling roses and cornices (coated)
- Textured walls
- Swirl and stipple patterns
- Coated plasterboard
- Artex ceilings
What affects the price in Hoppers Corner
What changes the cost:
- Disposal costs
- What the material is and its state
- How many samples are needed
- The quantity or area
We do not publish a price list, because jobs vary so much. Our cost guides show published ranges, with dates and sources.
What to photograph
Photos often save us a visit:
- The access route
- Any damage, cracks or broken pieces
- Visible markings
- Street parking nearby
Share the postcode, a short description and photos: send photos through our quote form, or phone 07833 053 749.
Can I do it myself?
Home testing kits exist, but you have to disturb the material to use one. HSE recommends a competent person takes samples.
Sanding, drilling, cutting and jet-washing are the worst things you can do to asbestos materials, so avoid them completely.
Nearby places to Hoppers Corner
Other services in Hoppers Corner
Landlords, managing agents and employers
If your business premises in Hoppers Corner were built before 2000, you should have an asbestos register and management plan, and contractors must be told what’s there.
Schools, halls and community buildings are non-domestic premises, so the duty to manage applies.
Why people call us in Hoppers Corner
Most problems come during renovation: sanding to smooth a ceiling, scraping it off dry or drilling for lights releases fibres.
These are some of the things we deal with in Hoppers Corner:
- Coatings damaged by leaks
- Coatings scraped during DIY
- Structural work through coated ceilings
- Rented homes refurbished between tenants
Non-domestic buildings like Barming Primary School should already have records of any textured coatings, before decorators start.
Before you book anyone
- Which laboratory analyses samples
- What category of work it is
- What paperwork you get
- What is not included
Artex removal around Hoppers Corner
Hoppers Corner is about 3 miles west of Maidstone, in Kent. For Artex jobs in Hoppers Corner, tell us about parking and access when you get in touch. Hoppers Corner is one of 922 towns and villages in Kent we cover. We work right across the region, from Hoppers Corner to Canterbury (about 27 miles away).
For rented flats close to East Farleigh station, coatings can be tested while the flat is empty. Older homes across Hoppers Corner may have coatings added during past renovations. Parts of the Kent Downs National Landscape are within about 8 miles of Hoppers Corner, and older rural homes there often have textured ceilings from past renovations.
We handle Artex jobs in every part of ME15. Streets in the area include Lower Road and Charlton Lane, and Artex removal is available on all of them. We also carry out Artex jobs in Kettle Corner (1 mile north-east), Farleigh Green (1 mile south), Barming Heath (1 mile north), West Farleigh (1 mile south-west) and East Farleigh (1 mile east). Within a short drive, we also work in Maidstone (3 miles east), Sittingbourne (13 miles north-east), Sevenoaks (12 miles west), Royal Tunbridge Wells (12 miles south-west), Gravesend (13 miles north) and Tonbridge (9 miles south-west).
Well-known places in the area include Kent Fire Brigade Museum (2.2 miles east) and Oakwood Hospital (1.4 miles north-east).
- Schools near Hoppers Corner include Oakwood Park Grammar School (1.9 miles north-east)
- Local pubs include The Tickled Trout pub (0.6 miles south-west)
- Survey or test first when it isn’t clear what a material is
- Planned to HSE guidance and the Control of Asbestos Regulations 2012
- Written paperwork: reports, results and waste consignment notes
- Waste sealed and labelled, then taken to a permitted site