A surveyor in a respirator putting a sample of loft material into a sealed bag

Kent · England

Artex Removal for Knox Bridge

Found something that might be asbestos in Knox Bridge? Our service covers testing and removal of Artex and textured coatings, with clear advice at each step.

  • Ceilings due for plastering or skimming
  • Rented homes refurbished between tenants
  • Ceilings before downlights go in

Ask for a quote Phone 07833 053 749

Artex removal in Knox Bridge

Artex in Knox Bridge homes

Knox Bridge is about 9 miles south of Maidstone, in Kent. Properties in Knox Bridge range from older houses to newer estates and commercial buildings, and anything built or refurbished before 2000 can contain asbestos. We work in 922 places in Kent. Our nearest city page is Canterbury, about 25 miles away.

Knox Bridge is within about 4 miles of the High Weald National Landscape; cottages and farmhouses nearby can have textured coatings too.

Anywhere in TN17, we can help with Artex removal, from busy streets to quiet lanes. For properties just outside Knox Bridge, we cover Cranbrook Common (1 mile south), Frittenden (1 mile east), Sinkhurst Green (2 miles north-east), Sissinghurst (2 miles south) and Staplehurst (2 miles north). Larger places within reach include Maidstone (9 miles north), Ashford (13 miles east), Royal Tunbridge Wells (12 miles west), Tonbridge (13 miles west), Kings Hill (11 miles north-west) and Foley Park (10 miles north).

Other landmarks nearby include Benenden Hospital (4.4 miles south-east) and Sissinghurst Castle (1.9 miles south-east).

Map of Knox Bridge © OpenStreetMap contributors

How artex removal works in Knox Bridge

Artex and similar coatings are common on ceilings in Knox Bridge, and older ones can contain a little asbestos. We test first, then remove the coating with controlled wet methods if needed. Common materials are coated ceiling roses, swirl patterns and coated plasterboard, and typical jobs are coatings damaged by DIY and ceilings due for rewiring or new downlights.

Rural homes near Knox Bridge have often been altered over generations, so coatings may date from earlier work. Paperwork is part of every job, because buyers, landlords and builders often ask for it.

A surveyor in a respirator and gloves making notes on a tablet in a utility room
Location
Knox Bridge (TN17)
County
Kent
Covers
Artex tested, then removed with wet methods
Afterwards
Lab result and consignment note
Price
A written quote before work starts
Call
07833 053 749
Page updated
26 October 2026

What happens

On the day, we seal off the room and protect floors and fittings, then keep the coating wet throughout. When we’re done, we explain what happens next and what paperwork follows.

  1. Tell us where the textured ceilings and walls are
  2. We sample each different coating for testing
  3. We go through the options and send a quote
  4. We seal off each room and remove the coating wet, or take the boards down whole
  5. We clean up and send the waste paperwork

Before we arrive

  • Clear belongings, but leave the material alone
  • Let us know if something’s broken
  • Clear access to the area, loft or garage

Ask for a quote

We quote each job individually, because no two are the same. To start, use our quote form or call 07833 053 749.

Tell us what you need

Read more

Common reasons for Artex jobs in Knox Bridge

People used Artex to cover cracks and uneven ceilings, and some contained a small amount of white asbestos (chrysotile) for strength.

These come up again and again:

  • Walls before tiling
  • Ceilings coming down
  • Rented homes refurbished between tenants
  • Coatings damaged by DIY

For rented flats close to Staplehurst station, textured ceilings can be tested between tenancies.

What your quote should include

  • VAT, clearly stated
  • Where the waste goes, with paperwork
  • Which areas and materials are covered
  • For licensed work, a valid HSE licence

How to choose an asbestos contractor

What we do and don’t cover

The usual limits are:

  • We need the room cleared
  • We test before removal, because a clear result means ordinary methods can be used
  • Plastering and making good are typically separate jobs

If in doubt, ask: we’ll recommend a test, a survey or removal.

Materials in Knox Bridge

  • Textured walls
  • Patched or painted coatings
  • Artex ceilings
  • Swirl and stipple patterns
  • Ceiling roses and cornices (coated)
  • Coated plasterboard

Service details

Materials we deal with

Textured walls

They’re tested and removed in the same way as ceilings.

Coated plasterboard

Board removal avoids stripping.

Choosing the right option

Testing first can save a lot: if the coating is clear, ordinary methods can be used. Grouping jobs together can keep costs down, for example testing several materials, or removing a garage roof and a flue at the same time.

What you get

  • Homes, rented property and workplaces
  • Waste taken to a permitted site with a consignment note
  • Honest advice, even when the answer is to leave it
  • Work done to the regulations

Take a look at our prices page or published price ranges.

After the job

The ceiling or wall is left ready for your plasterer.

Staying safe afterwards:

  • Book your plasterer after removal
  • Photos help us quote
  • Test every different coating
  • Plan where you will stay or work while rooms are closed off

Don’ts

Don’t sand, scrape dry or wire-brush a textured coating before it’s been tested.

Keep away from flaking or fallen coating and ask for advice.

Prices and what affects them

Our quotes take into account:

  • Location, parking and any London charges
  • Access: height, lofts, steps and space
  • The category of work
  • The survey scope

Dealing with asbestos before building work is typically cheaper than finding it mid-job, when everything has to stop.

Helping us quote

For a quick quote, include:

  • Visible markings
  • An overall view
  • A close-up from a safe distance
  • An idea of size

Photos taken from a safe distance are fine: do not touch the material, just send them through our quote form.

Duty holders and landlords in Knox Bridge

If you manage or own a block in Knox Bridge, the asbestos register for common parts should be kept up to date and shared with contractors, and condition checked regularly.

Duty holders for workplaces and the shared parts of flats in Knox Bridge must manage asbestos under regulation 4 of the Control of Asbestos Regulations 2012. That means finding it, assessing it, recording it and planning how to manage it.

Knox Bridge questions

Do you cover small places like Knox Bridge?

We do: small villages are covered too. Just tell us how to reach the property.

Do you work on properties in the High Weald National Landscape?

Yes. The asbestos rules are the same in protected landscapes, but access to farm and rural buildings can take planning.

How do I know if my property contains asbestos?

Any building built or refurbished before 2000 can contain asbestos. Testing a sample is the only way to know.

How dangerous is asbestos?

Asbestos fibres can cause serious lung diseases years after exposure. The risk comes mainly from disturbing materials that contain it, so identifying it before work is important.

Do I need to be at home?

We need access to every area involved in the job.

Is Artex removal licensed work?

Normally not, according to HSE. Larger-scale removal using steam or gel is notifiable non-licensed work.

What if asbestos is found during building work?

The builder should stop and close off the area. We can test the material and, if needed, plan its removal.

When can you start?

That depends on the work and current bookings. You will get available dates with the quote, and notifiable work needs notifying before it starts.

  • Identify it first: we test or survey before planning removal
  • Planned to HSE guidance and the Control of Asbestos Regulations 2012
  • Everything in writing: quotes, reports, results and waste notes
  • Waste sealed and labelled, then taken to a permitted site

How it works · Licensed or non-licensed? · Get a quote