A surveyor in a respirator putting a sample of loft material into a sealed bag

Surrey · England

Artex Removal in Limpsfield

Artex removal in Limpsfield, from older homes to workplaces. You get a written quote before anything starts.

  • Ceilings before skimming
  • Walls before tiling
  • Flaking textured ceilings

Ask for a quote Ring 07833 053 749

Can I do it myself?

A professional job comes with paperwork: results, a report or a consignment note, which buyers and builders may ask for.

Sanding, drilling, cutting and jet-washing are the worst things you can do to asbestos materials.

Artex removal near Limpsfield

A textured ceiling in good condition is low risk if it’s left alone. Trouble starts when it’s sanded, dry-scraped, drilled or knocked through, which is why testing first matters in Limpsfield. From coatings already disturbed and walls before tiling, we cover stipple finishes, swirl patterns and Artex ceilings and more.

Village homes like those in Limpsfield have often been altered several times, so coatings may date from earlier work. Everything is explained in plain English, including when it’s better to leave a material in place.

Location
Limpsfield (RH8)
Area hub
Surrey
Covers
Textured ceilings and walls
Afterwards
Lab result and consignment note
Quotes
Written quote for your job
Telephone
07833 053 749
Last updated
26 October 2026
A surveyor making notes before textured coating work

Questions from Limpsfield

Do you cover Limpsfield and the area around Oxted station?

Yes. Oxted station is about 0.6 miles west of Limpsfield, and we cover both.

Is the Artex in my Limpsfield home asbestos?

Some may, but many coatings don’t contain asbestos. Testing a sample is the only way to know.

What if the weather’s bad?

Indoor work is not affected. Outdoor removal may be postponed in strong wind or heavy rain, for safety.

Can I sand my Artex ceiling smooth?

Not until it’s been tested. Sanding or dry scraping an asbestos coating releases fibres.

Should all asbestos be removed?

Not always. Sound material that will not be touched can often stay, as long as it’s recorded.

Is Artex removal licensed work?

Typically not: HSE’s code of practice says textured coating work is not normally licensable, but larger-scale steam or gel removal must be notified first.

Can asbestos go in my bin?

No. Asbestos is hazardous waste and must go to a site that accepts it. When we remove it, it’s taken to a permitted site with a consignment note.

Can you quote from photos?

Clear photos and measurements are often enough; otherwise we’ll arrange a visit.

Artex removal around Limpsfield

Limpsfield is about 5 miles south-east of Caterham, in Surrey. Anywhere in Limpsfield, just send the postcode, and we will quote. We work in 395 places in Surrey, from the larger towns to small villages. We work right across the region, from Limpsfield to Crawley (13 miles away).

Older homes across Limpsfield may have coatings added during past renovations. If you are refurbishing a rental near Oxted station, textured ceilings can be tested between tenancies.

Here we cover the RH8 postcode area, and your Artex job can be anywhere in it. Streets in the area include High Street, Detillens Lane and Padbrook, and Artex removal is available on all of them. Limpsfield sits on or near the B2025, so mention parking if the property is on one. Neighbouring places we cover include Oxted (1 mile south-west), Pains-Hill (1 mile south-east), Hurst Green (1 mile south-west), The Chart (1 mile south-east) and Titsey (1 mile north-east). Within a short drive, we also work in Epsom (13 miles north-west), Horley (9 miles south-west), Redhill (8 miles west), Ewell (13 miles north-west), Reigate (9 miles west) and Caterham (5 miles north-west).

Other landmarks nearby include Foetal Alcohol Spectrum Disorders Clinic (0.6 miles west). Within reach you will find Botley Hill and Bay Pond.

  • Nearby schools include Oxted School (0.5 miles west) and Hazelwood School (0.6 miles south)
Map of Limpsfield © OpenStreetMap contributors

How it works

We finish by cleaning the room thoroughly. While we work, the area stays out of bounds.

  1. Describe the rooms and coatings
  2. We test the coating if it hasn’t been tested
  3. We plan the method and quote
  4. The room is sealed off and the coating removed wet, never sanded or dry-scraped
  5. The waste is bagged, the room cleaned and the waste taken to a permitted site

How to prepare

  • Make sure we can get to the area
  • Find any old asbestos reports
  • Leave the suspect material alone until we arrive

Ask for a quote

The quickest way to a quote is to send photos and the postcode: just ring 07833 053 749, or send the details through our contact page.

Ask for a quote

Read more

What it might be made of

Coated plasterboard

Taking boards down whole avoids stripping the coating.

Patched areas

We may sample patches separately.

Weighing up your options

Remove the coating, or the whole ceiling? Each has pros and cons, depending on the room. Sometimes a test shows removal isn’t needed, because the material is clear.

What you get

  • No removal until we know what it is
  • Quotes that spell out the scope
  • Samples analysed by an accredited laboratory
  • Across London and the South East

See our prices page or our cost guide.

What it costs

Every quote reflects:

  • Access to the area
  • The number of samples or the size of the building
  • Disposal costs
  • The size of the job

Grouping jobs together can keep costs down, such as testing several materials at once.

Photos that help

For a quick quote, include:

  • An overall view
  • Any labels or markings, if you can see them safely
  • A closer photo of the material, without touching it
  • The access route

Unsure whether you need a test, a survey or removal? Ring 07833 053 749, or send the details through our contact page, and we’ll recommend the right option.

Limits to be aware of

It’s worth knowing what Artex removal does and doesn’t cover:

  • Other materials may need their own approach
  • We test before removal, because a clear result means ordinary methods can be used
  • The room being worked on has to be empty and sealed off

If you’re unsure, describe the job and send photos, and we will advise.

Materials in Limpsfield

  • Coated plasterboard
  • Patched or painted coatings
  • Textured walls
  • Artex ceilings
  • Ceiling roses and cornices (coated)
  • Swirl and stipple patterns

Service details

What happens next

File the result and the paperwork.

Keeping things safe:

  • Tell us which rooms and roughly how big they are
  • Keep pets away
  • Test every different coating
  • Line up the plasterer for afterwards

Don’ts

If a coating has been damaged by a leak, keep people away from fallen pieces and ask for advice.

Test before the builders arrive.

Common reasons for Artex jobs in Limpsfield

Many trades want a test result first.

Common situations in older properties include:

  • Damaged or cracked coatings
  • Ceilings before plastering
  • Loft conversions and extensions
  • Ceilings coming down

Non-domestic buildings like Limpsfield CofE Infant School should already have records of any textured coatings, before decorators start.

What your quote should include

  • Laboratory analysis by an accredited lab
  • How the work will be done, and the controls used
  • Suitable insurance for the work
  • What paperwork you get

What to check before booking

  • Nothing removed blind: unknown materials are tested first
  • Work planned to the Control of Asbestos Regulations 2012 and HSE guidance
  • Everything in writing: quotes, reports, results and waste notes
  • Asbestos waste double-bagged or wrapped and taken to a permitted site

How it works · Licensed or non-licensed? · Get a quote