A surveyor in a respirator putting a sample of loft material into a sealed bag

Kent · England

Artex Removal for Linton

Looking for Artex removal in Linton? We work across Linton and the towns around it, with clear advice and a written quote.

  • Walls before tiling
  • Ceilings before downlights go in
  • Ceilings before plastering

Get a quote Ring 07833 053 749

Artex removal near Linton

About our artex removal in Linton

Textured coatings like Artex were used on ceilings and walls for decades, and those applied before 2000 can contain a small amount of asbestos. We test first, then remove the coating with controlled wet methods if needed. Typical jobs include walls before tiling and ceilings due to be knocked through or removed, involving Artex ceilings, swirl patterns and textured walls.

Rural homes near Linton have often been altered over generations, so coatings may date from earlier work. We start with a clear answer: is it asbestos, and what should you do about it.

A surveyor with a sample bag and scraper indoors
Where
Linton (ME17)
County
Kent
Service
Artex tested, then removed with wet methods
Afterwards
Lab result and consignment note
Quotes
Written quote for your job
Telephone
07833 053 749
Last updated
26 October 2026

Linton properties and textured coatings

Linton is about 3 miles south of Maidstone, in Kent. In Linton, we hear from homeowners, landlords and businesses. Linton is one of 922 places in Kent where we work. Our area stretches from Linton to Canterbury (about 25 miles away).

Older homes across Linton may have coatings added during past renovations. For rented flats close to East Farleigh station, a void period is a good time to deal with textured ceilings. Linton is within about 7 miles of the Kent Downs National Landscape; cottages and farmhouses nearby can have textured coatings too.

We handle Artex jobs in every part of ME17. Local streets include Wheeler's Lane, Vicarage Fields and Linton Hill; we cover every one. Neighbouring places we cover include Boughton Green (1 mile north-east), Loose (1 mile north), Boughton Monchelsea (2 miles north-east), Wierton (2 miles east) and Park Wood (2 miles north-east). We also cover nearby towns such as Maidstone (3 miles north), Sittingbourne (13 miles north-east), Sevenoaks (15 miles west), Royal Tunbridge Wells (12 miles south-west), Tonbridge (10 miles west) and Kings Hill (6 miles north-west).

A little further out are Kent Fire Brigade Museum (2.9 miles north) and The Mall Maidstone (3.9 miles north).

  • Pubs nearby include The Bull Inn (within half a mile north)
Map of Linton © OpenStreetMap contributors

Responsibilities for owners

Duty holders for workplaces and the shared parts of flats in Linton must manage asbestos under the Control of Asbestos Regulations 2012. That means finding it, assessing it, recording it and planning how to manage it.

Landlords of garage blocks and outbuildings should find out whether the roofs are asbestos cement, before repairs are arranged.

Why people call us in Linton

Renovations disturb coatings: sanding to smooth a ceiling, scraping it off dry or drilling for lights.

These are some of the things we deal with in Linton:

  • Rented homes refurbished between tenants
  • Loft conversions
  • Coatings in the way of electrical work
  • Coatings scraped during DIY

For a school such as Cornwallis Academy, the duty holder’s records should show any coatings.

Before booking anyone

  • Any exclusions
  • VAT, clearly stated
  • What paperwork you get
  • Suitable insurance for the work

Choosing an asbestos contractor

Can I do it myself?

Sanding, drilling, cutting and jet-washing are the worst things you can do to asbestos materials.

A professional job comes with paperwork: a record that buyers, insurers and builders may want to see.

A closer look at the materials

Ceiling roses and cornices

Roses and cornices may be coated.

Artex ceilings

Patterned ceilings are the classic example.

Linton questions

Do you work on properties in the Kent Downs National Landscape?

Yes, the same rules apply there, though access to rural buildings may need planning.

Do textured ceilings in Linton homes contain asbestos?

Some older coatings do, and many do not. Only a test will tell you.

Can I put asbestos in a skip?

Never: it’s hazardous waste. We take it to a permitted site with paperwork.

Is Artex removal licensed work?

Normally not: HSE treats textured coating work as normally non-licensed, but larger-scale steam or gel removal must be notified first.

Do I need to move out during Artex removal?

The work room is sealed and kept clear. You may be able to use the rest of the house.

Do you work for landlords and businesses?

Yes: homeowners, landlords, managing agents, businesses and contractors. Send the details.

What should I do if I’ve disturbed asbestos?

Stop, keep people away from the area and do not sweep or vacuum up debris. Then ask for advice; if you’re worried about your health, speak to your GP.

Is it better to remove the coating or the ceiling?

Both work; it depends on the room. We will advise for each room.

Choosing the right option

You will find DIY products for removing Artex, but if it contains asbestos, the job needs proper controls. Test first. Grouping jobs together can keep costs down, such as testing several materials at once.

Why choose us

  • Accredited laboratory results
  • Waste taken to a permitted site with a consignment note
  • Reports and results you can share
  • Written quotes that say what’s included

See our prices page and the cost guide.

Step by step

We finish by cleaning the room thoroughly. On the day, we check the area and talk you through the plan first.

  1. Tell us which rooms and surfaces
  2. We test the coating if it hasn’t been tested
  3. We plan the removal and send a quote
  4. The coating is removed with controls
  5. We clean up and send the waste paperwork

How to prepare

  • Clear access to the area, loft or garage
  • Keep the area clear of children and pets
  • Tell us about anything that is already damaged

Get a quote

We quote each job individually, because no two are the same. To start, ring 07833 053 749, or send the details through our contact page.

Tell us what you need

Read more

Prices and what affects them

The biggest factors in the price are:

  • Parking and access charges
  • Access to the area
  • The quantity or area
  • How much waste there is

The cost of Artex removal depends on the job: the materials, the amount, access and what paperwork is needed. Every quote is individual.

Photos that help

When you send photos, these help most:

  • A photo of the whole area
  • A close-up from a safe distance
  • Cracks or breaks
  • Labels, if any

For a quote, use our quote form or call 07833 053 749. Tell us the postcode, what the material is and where, and send photos if you can.

What’s included, and what is not

Some limits to bear in mind:

  • Other materials may need their own approach
  • Untested coatings are tested first, because a clear result means ordinary methods can be used
  • Plastering and making good are normally separate jobs

If you’re unsure, describe the job and send photos, and we will advise before you book.

What we deal with

  • Ceiling roses and cornices (coated)
  • Patched or painted coatings
  • Swirl and stipple patterns
  • Artex ceilings
  • Textured walls
  • Coated plasterboard

Read more about the service

  • Identify it first: we test or survey before planning removal
  • Work planned to the Control of Asbestos Regulations 2012 and HSE guidance
  • Written paperwork: reports, results and waste consignment notes
  • Waste sealed and labelled, then taken to a permitted site

How it works · Licensed or non-licensed? · Get a quote