West Sussex · England
Asbestos Artex Removal in Lower Beeding, West Sussex
Artex removal across Lower Beeding and nearby, for homes, rented property and workplaces. Planned to HSE guidance, with written results and paperwork.
- Flaking textured ceilings
- Coatings scraped during DIY
- Structural work through coated ceilings
Artex removal for Lower Beeding
Artex removal around Lower Beeding
Lower Beeding is about 4 miles south-east of Horsham, in West Sussex. For Artex jobs in Lower Beeding, tell us about parking and access when you get in touch. Lower Beeding is one of 371 places in West Sussex where we work. We work right across the region, from Lower Beeding to Crawley (about 6 miles away).
If you are refurbishing a rental near Horsham station, coatings can be tested while the flat is empty. A school like Holy Trinity CofE Primary School should know from its asbestos register whether coatings have been tested, before decorators start.
Here we cover the RH13 postcode area, and your Artex job can be anywhere in it. Whether your property is on Fir Tree Close, Church Close and Trinity Field or anywhere nearby, the process is the same. Neighbouring places we cover include Monk's Gate (1 mile west), Mannings Heath (1 mile north-west), Crabtree (1 mile south), Plummers Plain (1 mile north-east) and Slaugham (2 miles east). Larger places within reach include Crawley (6 miles north-east), Horsham (4 miles north-west), Haywards Heath (7 miles east), Burgess Hill (8 miles south-east), East Grinstead (13 miles north-east) and Shoreham-by-Sea (14 miles south).
Well-known places in the area include Horsham Hospital (3.8 miles north-west). The countryside around Lower Beeding includes Warnham LNR.
- Local schools include Newells Preparatory School (under half a mile south)
Artex removal in Lower Beeding
We remove textured coatings from ceilings, walls, ceiling roses and coated boards, across Lower Beeding. Typical materials include swirl patterns, coated ceiling roses and textured walls, and people usually contact us about loft conversions and ceilings before plastering.
In places like Lower Beeding, textured ceilings appear in older and newer homes. Clear answers come first: is it asbestos, and what should you do about it.
- Location
- Lower Beeding (RH13)
- Area hub
- West Sussex
- Covers
- Testing and removal of textured coatings
- You receive
- Result and waste note
- Price
- A written quote before work starts
- Phone
- 07833 053 749
- Page updated
- 26 October 2026
Landlords, managing agents and employers
Landlords of garage blocks and outbuildings should know what the roofs are made of, before repairs are arranged.
If your business premises in Lower Beeding were built before 2000, you are likely to need an asbestos register and a management plan, and contractors must be told what’s there.
Weighing up your options
Plastering over it is an option, but never sand it first, and it remains in place. Every quote says whether VAT is included.
How we work in Lower Beeding
- Accredited laboratory results
- Work planned to HSE guidance and the regulations
- Records for your files
- Waste taken to a permitted site with a consignment note
Take a look at our prices page or the cost guide.
Common questions in Lower Beeding
Do you cover Lower Beeding from London?
Lower Beeding is about 33 miles from central London, well within our area.
Do you cover small places like Lower Beeding?
Yes. We cover villages and hamlets as well as towns. Tell us about access and parking.
Do you work in flats?
Yes. For shared areas, ask the managing agent about the asbestos register.
I think I’ve damaged asbestos. What now?
Leave the area, keep others out and close the door if you can. Avoid sweeping, vacuuming or dusting, then contact a professional; your GP can advise if you’re worried about your health.
Do you work for landlords and businesses?
We do. We work for landlords, managing agents, employers and contractors as well as homeowners.
Do you need a licence to remove Artex?
Normally not: HSE treats textured coating work as normally non-licensed, though large steam or gel jobs are notifiable.
How do I get a quote?
Just fill in the enquiry form or give us a call on 07833 053 749. Include the postcode, a description and photos.
Do I need to move out during Artex removal?
You can often stay in the rest of the house: the work room is closed off until it’s finished.
After the job
Tell your plasterer and electrician what was done.
Once we are done:
- Keep the results and paperwork
- Plan where you’ll stay or work while rooms are closed off
- Test every different coating
- Empty the rooms in advance
What to avoid
Keep away from flaking or fallen coating.
Don’t sand, scrape dry or wire-brush a textured coating before it’s been tested.
How we work
We bag and label the waste as we work, for disposal at a permitted site. Nobody else needs to be in the work area, so please keep children and pets away.
- Tell us where the textured ceilings and walls are
- Each coating is sampled and tested
- We go through the options and send a quote
- The room is sealed, and the coating removed wet or the boards taken down
- We clean up and send the waste paperwork
Preparing for the visit
- Tell neighbours if the work is close to their property
- Keep away from the material in the meantime
- Let us know if something’s broken
How to get a quote
To get a quote, use our quote form or call 07833 053 749. Tell us the postcode, what the material is and where, and send photos if you can.
Read more
Prices and what affects them
The cost depends on:
- The type of material and its condition
- Parking and access charges
- Waste quantity and disposal
- Access to the area
Grouping jobs together can keep costs down, such as testing several materials at once.
Sending photos
The most useful photos are:
- Any labels or markings, if you can see them safely
- A wide shot showing where the material is
- Cracks or breaks
- A closer photo of the material, without touching it
We quote each job individually, because no two are the same. To start, use our quote form or call 07833 053 749.
A closer look at the materials
Painted coatings
Paint often hides the coating, which doesn’t change what’s underneath.
Patched areas
We may sample patches separately.
Common reasons for Artex jobs in Lower Beeding
People used Artex to cover cracks and uneven ceilings, and some contained a small amount of white asbestos (chrysotile) for strength.
People usually contact us about one of these:
- Walls before tiling
- Loft conversions and extensions
- Structural work through coated ceilings
- Coatings in the way of electrical work
Older homes across Lower Beeding may have coatings added during past renovations.
Questions to ask before booking
- How the waste will be disposed of, and whether you’ll get a consignment note
- Which areas and materials are covered
- The method and controls
- Insurance appropriate to asbestos work
Places near Lower Beeding
Also in Lower Beeding
The scope of Artex removal
So you know what to expect:
- Untested coatings are tested first, because a clear result means ordinary methods can be used
- Other materials may need their own approach
- We need the room cleared
Not sure what you need? Send us photos and we will tell you honestly before booking.
Materials we see
- Coated plasterboard
- Artex ceilings
- Ceiling roses and cornices (coated)
- Patched or painted coatings
- Textured walls
- Swirl and stipple patterns
- Identify it first: we test or survey before planning removal
- Done to the regulations: HSE guidance and CAR 2012
- Written paperwork: reports, results and waste consignment notes
- Legal disposal at a permitted site, with a consignment note