A surveyor in a respirator putting a sample of loft material into a sealed bag

Hampshire · England

Artex Removal for Lymore

Worried about asbestos in Lymore? Our service covers testing and removal of Artex and textured coatings, with clear advice at each step.

  • Structural work through coated ceilings
  • Ceilings before skimming
  • Rented homes refurbished between tenants

Get a quote Call 07833 053 749

Artex removal in Lymore

About our artex removal in Lymore

Removing an asbestos textured coating means sealing off the room, keeping the coating wet and never sanding or scraping it dry. Whether it’s coatings already disturbed and ceilings before plastering, we deal with coated ceiling roses, Artex ceilings and swirl patterns and more.

Rural homes near Lymore have often been altered over generations, so ceilings may have been coated during an earlier renovation. We start with a clear answer: what the material is, and what that means for your plans.

Where
Lymore (SO41)
Area hub
Hampshire
Service
Textured ceilings and walls
You receive
Test result and waste paperwork
Price
A written quote before work starts
Telephone
07833 053 749
Page updated
26 October 2026
Notes being made on a tablet indoors

Looking after things afterwards

Share the paperwork with your trades.

A few practical points:

  • Keep pets away
  • Each different coating needs testing
  • Plan around the closed rooms
  • Tell us which rooms and roughly how big they are

Avoid these

Don’t drill or cut into textured ceilings until you know what they contain.

Test before the builders arrive.

How it works

We finish by cleaning the room thoroughly before the seals come down. We go over the plan with you first, so you know what’s happening.

  1. Tell us which rooms and surfaces
  2. We test the coating if it hasn’t been tested
  3. We plan the removal and send a quote
  4. We seal off the room and remove the coating wet
  5. The room is cleaned and you get the paperwork

Preparing for the visit

  • Keep away from the material in the meantime
  • Dig out previous surveys
  • Clear belongings, but leave the material alone

Getting a price

Include any existing survey or test when you ring 07833 053 749, or send the details through our contact page; it helps us quote accurately.

Tell us what you need

Read more

What it costs

Every quote reflects:

  • Location, parking and any London charges
  • Disposal costs
  • Whether the work is non-licensed, notifiable or licensed
  • How easy it is to reach

Very low prices can mean corners are being cut: controls, protective equipment, laboratory fees and legal disposal all cost money.

Helping us quote

The most useful photos are:

  • Street parking nearby
  • Damaged areas
  • A wide shot showing where the material is
  • How we’d reach it

Share the postcode, a short description and photos: use our quote form or call 07833 053 749.

Should you do it yourself?

If you do find something during DIY, stop: leave the area, do not clean it up, and ask for advice.

A professional job comes with paperwork: results, a report or a consignment note, which buyers and builders may ask for.

Why people call us in Lymore

Coatings get damaged by water leaks, cracks and DIY, which can make them crumble.

Common situations in older properties include:

  • Walls before tiling
  • Ceilings before skimming
  • Damaged or cracked coatings
  • Coatings already disturbed

In older homes in Lymore, textured ceilings were often added in later decades.

What to look for in a quote

  • Which areas and materials are covered
  • Proof of an HSE licence where it’s needed
  • What is not included
  • Insurance appropriate to asbestos work

How to choose an asbestos contractor

Limits to be aware of

It’s worth knowing what Artex removal does and doesn’t cover:

  • We need the room cleared
  • Plastering and making good are normally separate jobs
  • We test before removal, since a negative result changes everything

Not sure what you need? Send us photos and we’ll tell you honestly before you book.

What we deal with

  • Ceiling roses and cornices (coated)
  • Artex ceilings
  • Textured walls
  • Coated plasterboard
  • Swirl and stipple patterns
  • Patched or painted coatings

More about this service

FAQs for Lymore

Do you come out to small villages like Lymore?

We do: small villages are covered too. Tell us about access and parking.

Do you work on properties in the New Forest National Park?

Yes. The asbestos rules are the same in protected landscapes, though access to rural buildings may need planning.

Can I just skim over it?

Skimming or boarding over an intact coating avoids disturbing it, but never sand it first, and keep a record.

I think I’ve damaged asbestos. What now?

Stop, keep people away from the area and don’t sweep or vacuum up debris. Then get advice; if you’re worried about your health, speak to your GP.

What does it cost to remove Artex?

Room sizes, the method and the waste decide, so we quote after testing.

When can you start?

We agree a date when you accept the quote. Some work has to be notified to the enforcing authority first, which affects timing.

Should I take the ceiling down instead?

Either can work: it depends on the room and the condition of the ceiling. We will advise room by room.

Can I sand my Artex ceiling smooth?

Not until it’s been tested. If it contains asbestos, sanding or dry scraping releases fibres.

Textured ceilings in Lymore

Lymore is about 2 miles south-west of Lymington, in Hampshire. Lymore is within our Hampshire area, whatever the size of the job. Lymore is one of 683 places in Hampshire we cover. Our area stretches from Lymore to Southampton (about 15 miles away).

For a school such as Milford-on-Sea Church of England Primary School, the duty holder’s records should show any coatings, before decorators start. If you are refurbishing a rental near Lymington Town station, coatings can be tested while the flat is empty. Parts of the New Forest National Park are within about 6 miles of Lymore, and older rural homes there often have textured ceilings from past renovations. Lymore is within about 3 miles of the coast, though indoor coating work goes ahead whatever the weather.

We cover Artex jobs across SO41. Local streets include Lymore Valley, Lymore Lane and School Lane; we cover every one. Close by, we cover Everton (1 mile north), Milford on Sea (1 mile south-west), Keyhaven (1 mile south-east), Lower Pennington (1 mile east) and Pennington (2 miles north-east). Larger places within reach include Totton (13 miles north), Hythe (12 miles north-east), New Milton (4 miles west), Ringwood (12 miles north-west), Warsash (15 miles north-east) and Barton on Sea (4 miles west).

Other landmarks nearby include Lymington New Forest Hospital (2.9 miles north-east) and St Barbe Museum and Art Gallery (2.4 miles north-east). Open spaces near Lymore include Milford on Sea LNR.

  • Local schools include Priestlands School (1.8 miles north-east)
  • Local pubs include The Crown Public House (0.7 miles north)
Map of Lymore © OpenStreetMap contributors

For landlords, agents and businesses

If you own a block of garages or outbuildings that you let should know what the roofs are made of, before anyone carries out repairs.

Contractors working for you need asbestos information before they start. HSE regularly reminds owners and trades of it.

Weighing up your options

What are the options for Artex? Intact coatings with no work planned can often stay; for smooth ceilings or work through the ceiling, removal is normally best. The cost of Artex removal depends on the job: the materials involved, how much there is, access and paperwork. Every quote is individual.

Why us?

  • Plain-English advice, including when to leave things alone
  • Jobs planned to HSE guidance
  • Accredited laboratory results
  • Reports and results you can share

Read our prices page or the cost guide.

  • Nothing removed blind: unknown materials are tested first
  • Work planned to the Control of Asbestos Regulations 2012 and HSE guidance
  • Everything in writing: quotes, reports, results and waste notes
  • Waste sealed and labelled, then taken to a permitted site

How it works · Licensed or non-licensed? · Get a quote