Kent · England
Artex Removal for Marden Thorn
Artex removal in Marden Thorn: testing and removal of Artex and textured coatings. Tell us what you’ve found and we’ll explain your options.
- Textured walls before a refit
- Ceilings due for rewiring or new downlights
- Loft conversions and extensions
Artex removal in Marden Thorn
Artex removal near Marden Thorn
Skimming or boarding over an intact coating avoids disturbing it, but the asbestos is still there and should be recorded for future work. Typical jobs include loft conversions and ceilings due to be knocked through or removed, including coated plasterboard, swirl patterns and textured walls.
Rural homes near Marden Thorn have often been altered over generations, so ceilings may have been coated during an earlier renovation. Clear answers come first: what the material is, and what that means for your plans.
- Location
- Marden Thorn (TN12)
- County
- Kent
- Service
- Artex tested, then removed with wet methods
- You receive
- Lab result and consignment note
- Price
- Quoted individually, in writing
- Telephone
- 07833 053 749
- Last updated
- 26 October 2026
Artex removal around Marden Thorn
Marden Thorn is about 7 miles south of Maidstone, in Kent. Anywhere in Marden Thorn, just send the postcode, and we will quote. Marden Thorn is one of 922 towns and villages in Kent where we work. You can also see our page for Canterbury, about 26 miles away.
Parts of the High Weald National Landscape are within about 5 miles of Marden Thorn; cottages and farmhouses nearby can have textured coatings too.
This part of Kent takes in TN12, and your Artex job can be anywhere in it. Streets in the area include Pagehurst Road and Thorn Road, and Artex removal is available on all of them. We also carry out Artex jobs in Wanshurst Green (1 mile north), Staplehurst (2 miles east), St Ann's Green (2 miles north), Milebush (2 miles north) and Horden (2 miles south). Within a short drive, we also work in Maidstone (7 miles north), Ashford (15 miles east), Royal Tunbridge Wells (11 miles west), Tonbridge (11 miles west), Kings Hill (9 miles north-west) and Foley Park (8 miles north).
Nearby you’ll also find South East Romany Museum (0.9 miles north) and Sissinghurst Castle (4.2 miles south-east).
Towns and villages near Marden Thorn
More for properties in Marden Thorn
What’s included, and what is not
Some limits to bear in mind:
- Other materials may need their own approach
- Plastering and making good are normally separate jobs
- Big jobs need notifying in advance, which affects the start date
Not sure what you need? Send us photos and we will tell you honestly.
Materials in Marden Thorn
- Coated plasterboard
- Textured walls
- Artex ceilings
- Ceiling roses and cornices (coated)
- Patched or painted coatings
- Swirl and stipple patterns
Questions from Marden Thorn
Do you come out to small villages like Marden Thorn?
We do: small villages are covered too. Tell us about access and parking.
Is the Artex in my Marden Thorn home asbestos?
Some may, but many coatings don’t contain asbestos. Only a test will tell you.
Do you cover Marden Thorn?
Yes, Marden Thorn is in our area. Send us the postcode for a quote.
Can I stay at home while you work?
The work room is sealed and kept clear. You may be able to use the rest of the house.
What should I do if I’ve disturbed asbestos?
Get everyone out of the area and keep it closed. Avoid sweeping, vacuuming or dusting, and ask for advice.
What if my house is newer?
Asbestos was banned in 1999, so a home built after 2000 shouldn’t contain it.
How can I get a price?
Just send photos through our quote form, or phone 07833 053 749. Include the postcode, a description and photos.
How dangerous is asbestos?
Breathing in asbestos fibres can cause serious diseases, often decades later. The main risk is from disturbing it, which is why identifying it first matters.
Doing it yourself?
Found something mid-DIY? Stop: leave the area, do not clean it up, and ask for advice.
Power tools, sanding and jet-washing release the most fibres.
What affects the price in Marden Thorn
What drives the price:
- How many samples are needed
- How much waste there is
- Access: height, lofts, steps and space
- Material and condition
Sometimes a test shows removal isn’t needed, because the material is clear.
Photos that help
Photo tips:
- The route in: gates, steps, stairs or the loft hatch
- A closer photo of the material, without touching it
- Any damage, cracks or broken pieces
- The parking area
Photos taken from a safe distance are fine: do not touch the material, just send them through our quote form.
Weighing up your options
A low price may mean shortcuts. Ask about the method and the waste. Very low prices can mean corners are being cut: proper controls, lab analysis and legal waste disposal cost money.
Why us?
- Covering London and the South East
- Lab analysis by an accredited laboratory
- Work done to the regulations
- No removal until we know what it is
Take a look at how we price jobs and the cost guide.
Typical Artex jobs in Marden Thorn
Many electricians and plasterers ask for a test result before working on textured ceilings.
In older properties, we often see:
- Structural work through coated ceilings
- Ceilings before skimming
- Ceilings before downlights go in
- Damaged or cracked coatings
If you’re refurbishing a rental near Marden station, textured ceilings can be tested between tenancies.
Before booking anyone
- Proof of an HSE licence where it’s needed
- What you will receive afterwards: a report, results or waste paperwork
- The method and controls
- Which areas and materials are covered
What happens next
Tell your plasterer and electrician what was done.
After the job, keep these in mind:
- Tell us which rooms and roughly how big they are
- File the test result and waste note
- Plan around the closed rooms
- Clear the rooms before the work
Things not to do
Do not try DIY removal products on untested coatings.
Plan testing before the renovation starts.
Step by step
We start by sealing and protecting the room, then keep the coating wet throughout. Our team uses the right protective equipment, and keeps dust to a minimum.
- Describe the rooms and coatings
- We sample the coating first
- If it contains asbestos, we agree the method and send a quote
- We seal the room and remove the coating with wet methods
- We clean up and dispose of the waste legally
How to prepare
- Make sure we can get to the area
- Keep the area clear of children and pets
- Dig out previous surveys
Ask for a quote
Tell us about the material, its location and your plans. Then fill in the enquiry form or give us a call on 07833 053 749.
Related guides
For landlords, agents and businesses
If you are responsible for a non-domestic building or the common parts of flats in Marden Thorn, you have a duty to manage asbestos under the Control of Asbestos Regulations 2012. That means finding it, assessing it, recording it and planning how to manage it.
Void periods are a good time for asbestos work, while the property is empty.
- Survey or test first when it isn’t clear what a material is
- Planned to HSE guidance and the Control of Asbestos Regulations 2012
- Written paperwork: reports, results and waste consignment notes
- Waste sealed and labelled, then taken to a permitted site