A surveyor in a respirator putting a sample of loft material into a sealed bag

Medway · England

Asbestos Artex Removal in Meresborough, Medway

Artex removal for properties in Meresborough and Medway: textured coating testing and removal, with written paperwork.

  • Ceilings before downlights go in
  • Loft conversions
  • Ceilings before skimming

Request a quote Phone 07833 053 749

Artex removal in Meresborough

How artex removal works in Meresborough

Artex and similar coatings are common on ceilings in Meresborough, and those applied before 2000 can contain a small amount of asbestos. We test first, then remove the coating with controlled wet methods if needed. Typical materials include swirl patterns, coated plasterboard and Artex ceilings, and typical jobs are extensions that cut into ceilings and landlord refurbishments.

Rural homes near Meresborough have often been altered over generations, so coatings may date from earlier work. If you are unsure what you need, ask: we’ll tell you honestly whether it’s a test, a survey or removal.

Waste being bagged by workers in full protective equipment
Where
Meresborough (ME8)
Region
Medway
What we do
Artex tested, then removed with wet methods
Afterwards
Result and waste note
Quotes
A written quote before work starts
Phone
07833 053 749
Updated
26 October 2026

Meresborough: your questions answered

Do textured ceilings in Meresborough homes contain asbestos?

Some older coatings do, and many don’t. Only a test will tell you.

How far is Meresborough from London?

Meresborough is about 32 miles from central London, well within our area.

Can I put asbestos in a skip?

No. Asbestos is hazardous waste and must go to a site that accepts it. We take it to a permitted site with paperwork.

Do I get anything in writing afterwards?

It depends on what we do: a report for a survey, a lab result for a test, or waste paperwork for removal.

What if asbestos is found during building work?

Stop work in that area and keep people out, then have the material identified before anything else happens.

Do I need to be at home?

We need access to every area involved in the job, and it helps if you are around to answer questions.

Is damaged asbestos an emergency?

Keep people away from damaged material and don’t clean it up yourself. Then contact us for advice.

Do you need a licence to remove Artex?

Normally not, according to HSE. Larger-scale removal using steam or gel is notifiable non-licensed work.

Looking after things afterwards

Share the paperwork with your trades.

Going forward:

  • Keep pets away
  • Empty the rooms in advance
  • Keep the results and paperwork
  • Each different coating needs testing

What to avoid

Keep away from flaking or fallen coating.

Never sand or dry-scrape Artex before testing.

What affects the price in Meresborough

Prices vary with:

  • How many samples are needed
  • How much waste there is
  • The type of material and its condition
  • Parking and access charges

A test can sometimes save the cost of removal altogether, if the material turns out not to contain asbestos.

What to photograph

Before you send photos, a few tips:

  • Any labels or markings, if you can see them safely
  • A wide shot showing where the material is
  • A closer photo of the material, without touching it
  • Street parking nearby

You’ll get a written quote. Just fill in the enquiry form or give us a call on 07833 053 749 with the details.

Should you do it yourself?

A professional job comes with paperwork: results, a report or a consignment note, which buyers and builders may ask for.

HSE advises the public not to repair or remove asbestos themselves. Higher-risk materials such as lagging, sprayed coatings and most insulating board must only be dealt with by an HSE-licensed contractor.

Artex removal around Meresborough

Meresborough is about 2 miles south-east of Gillingham, in Medway. Meresborough is within our Medway area, whatever the size of the job. Meresborough is one of 68 places in Medway we cover. Our area stretches from Meresborough to Canterbury (21 miles away).

For a school such as Park Wood Infant School, the duty holder’s records should show any coatings. In older homes in Meresborough, textured ceilings were often added in later decades. Parts of the Kent Downs National Landscape are within about 6 miles of Meresborough, and older rural homes there often have textured ceilings from past renovations.

Here we cover the ME8 postcode area, and your Artex job can be anywhere in it. Nearby, we also cover Rainham (1 mile north), Moor Street (1 mile north-east), Hartlip (1 mile east), Yelsted (1 mile south) and Lower Hartlip (1 mile east). Further out, we also cover Chatham (4 miles west), Rochester (6 miles north-west), Strood (7 miles north-west), Luton (4 miles north-west), Lordswood (3 miles west) and Hoo St Werburgh (6 miles north-west).

A little further out are Medway Maritime Hospital (3.7 miles north-west). Within reach you will find Detling Hill and Bishop Saltings.

  • Schools near Meresborough include Leigh Academy Rainham (1.1 miles north-east) and Howard School (1.3 miles north-west)
Map of Meresborough © OpenStreetMap contributors

What it might be made of

Textured walls

They’re tested and removed in the same way as ceilings.

Painted coatings

The sample includes the coating itself.

The scope of Artex removal

What’s in and what’s out:

  • We leave the surface ready for your plasterer
  • Other materials may need their own approach
  • We need the room cleared

If in doubt, ask: we will recommend a test, a survey or removal before booking.

Common materials

  • Swirl and stipple patterns
  • Patched or painted coatings
  • Coated plasterboard
  • Artex ceilings
  • Ceiling roses and cornices (coated)
  • Textured walls

Read more about the service

For landlords, agents and businesses

Contractors working for you need asbestos information before they start. HSE regularly reminds owners and trades of it.

The duty to manage applies to non-domestic premises and common parts, not to single private homes, but contractors still need to know about asbestos before they work.

How we work

On the day, we seal off the room and protect floors and fittings, then keep the coating wet throughout. On the day, we check the area and talk you through the plan first.

  1. Describe the coatings and rooms
  2. We test the coating if it hasn’t been tested
  3. If it contains asbestos, we agree the method and quote
  4. We seal off the room and remove the coating wet
  5. We clean up and send the waste paperwork

How to prepare

  • Clear the way to the work area
  • Tell us about parking and access
  • Let us know if something’s broken

How to get a quote

Photos and a postcode help us quote quickly: send photos through our quote form, or phone 07833 053 749.

Tell us what you need

Related guides

Weighing up your options

A test before removal can save money: if the coating is clear, ordinary methods can be used. Identifying asbestos early is cheaper than stopping work later, when everything has to stop.

Why choose us

  • Quotes that spell out the scope
  • No removal until we know what it is
  • Honest advice, even when the answer is to leave it
  • Across London and the South East

Take a look at our prices page or published price ranges.

  • Survey or test first when it isn’t clear what a material is
  • Done to the regulations: HSE guidance and CAR 2012
  • Written paperwork: reports, results and waste consignment notes
  • Legal disposal at a permitted site, with a consignment note

How it works · Licensed or non-licensed? · Get a quote