A surveyor in a respirator putting a sample of loft material into a sealed bag

Hampshire · England

Artex Removal for Mislingford

Artex removal in Mislingford: removal of textured ceilings and walls. Send us photos and we will tell you what you need.

  • Coatings scraped during DIY
  • Rented homes refurbished between tenants
  • Ceilings due for plastering or skimming

Ask for a quote Call 07833 053 749

Asbestos help in Mislingford

Artex removal for Mislingford properties

A textured ceiling in good condition is low risk if it’s left alone. Trouble starts when it’s sanded, dry-scraped, drilled or knocked through, which is why testing first matters in Mislingford. Whether it’s damaged or cracked coatings and coatings scraped during DIY, we cover Artex ceilings, coated ceiling roses and stipple finishes.

Village homes like those in Mislingford have often been altered several times, so coatings may date from earlier work. Our quotes are written and say what’s included, so you know where you stand.

Location
Mislingford (PO17)
County
Hampshire
Covers
Artex tested, then removed with wet methods
Paperwork
Result and waste note
Price
A written quote before work starts
Phone
07833 053 749
Page updated
26 October 2026
A surveyor making notes before textured coating work

The scope of Artex removal

Some limits to bear in mind:

  • We test before removal, because a clear result means ordinary methods can be used
  • Other asbestos materials found in the room are dealt with separately
  • Plastering and making good are typically separate jobs

If you’re unsure, describe the job and send photos, and we will advise.

Materials in Mislingford

  • Patched or painted coatings
  • Swirl and stipple patterns
  • Artex ceilings
  • Coated plasterboard
  • Ceiling roses and cornices (coated)
  • Textured walls

Read more about the service

What we deal with in Mislingford

Older coatings are often painted over many times, which can make them look newer than they are.

You cannot tell by looking, but these are common reasons people contact us:

  • Landlord refurbishments
  • Structural work through coated ceilings
  • Ceilings due for plastering or skimming
  • Walls before a kitchen or bathroom refit

For rented flats close to Botley station, textured ceilings can be tested between tenancies.

Questions to ask before you book

  • How the waste will be disposed of, and whether you’ll get a consignment note
  • What paperwork you get
  • Which areas and materials are covered
  • Suitable insurance for the work

What to check before you book

DIY and asbestos

With a professional job, you get a record: results, a report or a consignment note, which buyers and builders may ask for.

Power tools, sanding and jet-washing release the most fibres, so avoid them completely.

Common questions in Mislingford

Could my house in Mislingford contain asbestos?

That depends on when it was built and altered: asbestos products were used until 1999, so pre-2000 homes and extensions in Mislingford may have it. Look at garage roofs, textured ceilings, old floor tiles, soffits and flues.

Do you work near Botley station?

Yes, we cover Mislingford and the area towards Botley station, about 4 miles west.

Is it better to remove the coating or the ceiling?

Both are options: the right choice depends on the room. We’ll advise room by room.

Do you work in flats?

Yes. For shared areas, ask the managing agent about the asbestos register.

Do I need a test or a survey?

A test checks specific materials; a survey checks a whole building or work area. For building work, a survey is generally needed.

Does asbestos always have to come out?

Not necessarily. Sound material that will not be touched can often stay, as long as it’s recorded.

Do I get anything in writing afterwards?

Depending on the job, a report, results or a consignment note.

How can I get a price?

Just fill in the enquiry form or give us a call on 07833 053 749. Tell us the postcode, what the material is and where, and send photos if you can.

Step by step

If we are taking the boards down instead, they’re removed whole where possible. The work area is kept clear while we are working, so arrange for pets and children to be elsewhere.

  1. Describe the rooms and coatings
  2. We sample the coating first
  3. If it contains asbestos, we agree the method and send a quote
  4. We seal the room and remove the coating with wet methods
  5. The waste is bagged, the room cleaned and the waste taken to a permitted site

Before we arrive

  • Let neighbours know if the work is near them
  • Let us know where we can park
  • Move things out of the way carefully

Get a quote

Every job is quoted in writing. Fill in the enquiry form or give us a call on 07833 053 749 with the details, including any survey or test you already have.

Ask for a quote

Related guides

After the job

After removal, the room is cleaned and the waste goes to a permitted site, and you get the paperwork.

Going forward:

  • Line up the plasterer for afterwards
  • Tell us which rooms and roughly how big they are
  • Test every different coating
  • Keep the results and paperwork

Don’ts

Hold off on drilling until you have a result.

If a coating has been damaged by a leak, keep people away from fallen pieces and ask for advice.

Responsibilities for owners

If you manage or own a block in Mislingford, the register for shared areas needs keeping current and sharing with trades.

If you are responsible for a non-domestic building or the common parts of flats in Mislingford, you have a duty to manage asbestos under the Control of Asbestos Regulations 2012. In practice: find it, assess it, record it and manage it.

Artex removal around Mislingford

Mislingford is about 5 miles north of Fareham, in Hampshire. We cover Mislingford as part of Hampshire, for Artex jobs of every size. Mislingford is one of 683 places in Hampshire we cover. Our area stretches from Mislingford to Southampton (10 miles away).

For a school such as Swanmore College of Technology, the duty holder’s records should show any coatings.

Here we cover the PO17 postcode area, and your Artex job can be anywhere in it. Neighbouring places we cover include Kingsmead (1 mile south), Woodend (1 mile south-east), Hill Grove (1 mile north), Shirrell Heath (1 mile west) and Swanmore (1 mile north-west). We also cover nearby towns such as Winchester (11 miles north-west), Gosport (9 miles south), Havant (9 miles south-east), Eastleigh (8 miles west), Fareham (5 miles south) and Horndean (7 miles east).

A little further out are Knowle Hospital (3.6 miles south-west) and Bishop's Waltham Museum (2.7 miles north-west). Green spaces nearby include St Clair's Meadow.

  • Pubs nearby include The Roebuck pub (0.9 miles south)
Map of Mislingford © OpenStreetMap contributors

Materials, one by one

Artex ceilings

Swirl, stipple and other patterns on ceilings are the most common textured coatings.

Ceiling roses and cornices

Decorative mouldings are sometimes coated too.

How we price Artex removal

We base our quote on:

  • The survey scope
  • Waste quantity and disposal
  • The quantity or area
  • The type of material and its condition

The cost of Artex removal depends on the job: the materials, the amount, access and what paperwork is needed. Every quote is individual.

Photos that help

A few photos can save a site visit:

  • Visible markings
  • Where we could park
  • Approximate dimensions
  • A close-up from a safe distance

Tell us about the material, its location and your plans. Then fill in the enquiry form or give us a call on 07833 053 749.

  • Survey or test first when it isn’t clear what a material is
  • Planned to HSE guidance and the Control of Asbestos Regulations 2012
  • Everything in writing: quotes, reports, results and waste notes
  • Legal disposal at a permitted site, with a consignment note

How it works · Licensed or non-licensed? · Get a quote