A surveyor in a respirator putting a sample of loft material into a sealed bag

Buckinghamshire · England

Artex Removal for Mundaydean Bottom

Any pre-2000 building in Mundaydean Bottom may contain asbestos. We offer textured coating testing and removal.

  • Coatings damaged by DIY
  • Loft conversions
  • Ceilings before downlights go in

Get a quote Ring 07833 053 749

Artex removal in Mundaydean Bottom

Artex removal near Mundaydean Bottom

Ceilings, walls and coated boards can all be dealt with, across Mundaydean Bottom. Common materials are stipple finishes, coated ceiling roses and Artex ceilings, and typical jobs are landlord refurbishments and damaged or cracked coatings.

In places like Mundaydean Bottom, textured ceilings appear in older and newer homes. Every quote is in writing and spells out what’s covered, so you know where you stand.

A surveyor in a respirator and gloves making notes on a tablet in a utility room
Location
Mundaydean Bottom (SL7)
County
Buckinghamshire
What we do
Artex tested, then removed with wet methods
Afterwards
Result and waste note
Quote
Quoted individually, in writing
Call
07833 053 749
Page updated
26 October 2026

What it costs

Our quotes take into account:

  • The type of material and its condition
  • Access: height, lofts, steps and space
  • Whether the work is non-licensed, notifiable or licensed
  • How many samples are needed

Compare what each quote includes, not just the total: the scope, the method, the waste and the paperwork.

Photos that help

Good photos help us plan and quote. Take them without disturbing anything:

  • Where we could park
  • A closer photo of the material, without touching it
  • The access route
  • An idea of size

To get a quote, ring 07833 053 749, or send the details through our contact page. Tell us the postcode, what the material is and where, and send photos if you can.

Should you do it yourself?

Asbestos waste can’t go in household bins, recycling or skips. It must go to a permitted site; check with your council about small amounts.

Sanding, drilling, cutting and jet-washing are the worst things you can do to asbestos materials.

After we’ve finished in Mundaydean Bottom

Keep the test result and waste paperwork with your property records.

After the job, keep these in mind:

  • File the test result and waste note
  • Clear the rooms before the work
  • Line up the plasterer for afterwards
  • Keep pets away

Don’ts

Do not use a steamer or chemical stripper on an untested coating.

Don’t try DIY removal products on untested coatings.

Step by step

The coating is softened with water, steam or gel and removed with hand tools, with no sanding or dry scraping. We go over the plan with you first, so you know what’s happening.

  1. Describe the coatings and rooms
  2. We sample each coating
  3. We plan the removal and send a quote
  4. We seal off the room and remove the coating wet
  5. The room is cleaned and you get the paperwork

Before we arrive

  • Tell us about parking and access
  • Keep children and pets away on the day
  • Do not disturb the material before we get there

For businesses and landlords in Mundaydean Bottom

If your business premises in Mundaydean Bottom were built before 2000, you are likely to need an asbestos register and a management plan, and you must tell contractors what’s there.

Landlords of garage blocks and outbuildings should know what the roofs are made of, before repairs are arranged.

Common reasons for Artex jobs in Mundaydean Bottom

People used Artex to cover cracks and uneven ceilings, and some included a little chrysotile.

You cannot tell by looking, but these are common reasons people contact us:

  • Loft conversions
  • Landlord refurbishments
  • Ceilings before downlights go in
  • Walls before tiling

In older homes in Mundaydean Bottom, textured ceilings were often added in later decades.

Questions to ask before booking

  • How the waste will be disposed of, and whether you’ll get a consignment note
  • Insurance appropriate to asbestos work
  • The method and controls
  • Which laboratory analyses samples

Choosing an asbestos contractor

Mundaydean Bottom properties and textured coatings

Mundaydean Bottom is about 2 miles north-west of Marlow, in Buckinghamshire. Anywhere in Mundaydean Bottom, just send the postcode. Mundaydean Bottom is one of 263 towns and villages in Buckinghamshire where we work. Our area stretches from Mundaydean Bottom to Reading (about 12 miles away).

If you’re refurbishing flats near Marlow station, coatings can be tested while the flat is empty. For a school such as Burford School, the duty holder’s records should show any coatings. Parts of the Chilterns National Landscape are within about 7 miles of Mundaydean Bottom; cottages and farmhouses nearby can have textured coatings too.

Wherever your property is in SL7, Artex removal is available, from busy streets to quiet lanes. Close by, we cover Bovingdon Green (1 mile south), Marlow Common (1 mile south), Chisbridge Cross (1 mile north-west), Bockmer End (2 miles south-west) and Danesfield (2 miles south). Within a short drive, we also work in High Wycombe (4 miles north-east), Chesham (12 miles north-east), Amersham (11 miles north-east), Beaconsfield (7 miles east), Chalfont St Peter (11 miles east) and Southcourt (15 miles north).

Well-known places in the area include Chiltern Sound Phonograph Museum (1.5 miles south-east) and Marlow Community Hospital (1.7 miles south-east). Open spaces near Mundaydean Bottom include Carpenter's Wood.

  • Local schools include Sir William Borlase's Grammar School (1.5 miles south-east)
  • Nearby, you’ll find The Royal Oak pub (0.8 miles south-east)
Map of Mundaydean Bottom © OpenStreetMap contributors

Common questions in Mundaydean Bottom

Is the Artex in my Mundaydean Bottom home asbestos?

Some may, but many coatings do not contain asbestos. Testing a sample is the only way to know.

Do you come out to small villages like Mundaydean Bottom?

Yes. We cover villages and hamlets as well as towns. Tell us about access and parking.

Will I get the price in writing?

Yes, always.

How do I know if my property contains asbestos?

You cannot tell by eye. A sample analysed in a laboratory is the reliable way to find out, especially in buildings from before 2000.

Do I need to move out during Artex removal?

The work room is sealed and kept clear. Often you can stay in other rooms.

Is it better to remove the coating or the ceiling?

Either can work: it depends on the room and the condition of the ceiling. We will recommend one for each room.

Can I just skim over it?

Skimming or boarding over an intact coating avoids disturbing it, but don’t sand it first, and record that it’s there.

Does someone need to be there?

Someone has to let us into all the areas in the job, and it helps if you’re around to answer questions.

What it might be made of

Painted coatings

We sample through the paint into the coating.

Patched areas

Different areas may need separate samples.

Choosing the right option

Skimming over Artex avoids disturbing it, but don’t sand it smooth first, and it remains in place. What you pay depends on the job itself: the materials, the amount, access and what paperwork is needed. Every quote is individual.

How we work in Mundaydean Bottom

  • Reports and results you can share
  • Waste paperwork for every removal
  • Across London and the South East
  • Plain-English advice, including when to leave things alone

See how we price jobs or the cost guide.

  • Nothing removed blind: unknown materials are tested first
  • Done to the regulations: HSE guidance and CAR 2012
  • Written paperwork: reports, results and waste consignment notes
  • Legal disposal at a permitted site, with a consignment note

How it works · Licensed or non-licensed? · Get a quote