A surveyor in a respirator putting a sample of loft material into a sealed bag

West Sussex · England

Artex Removal in Newtimber

Looking for Artex removal in Newtimber? We work across Newtimber and the towns around it, with clear advice and a written quote.

  • Loft conversions
  • Rented homes refurbished between tenants
  • Coatings damaged by DIY

Request a quote Ring 07833 053 749

Artex removal for Newtimber

Good to know

Every job has limits; these are the usual ones:

  • Big jobs need notifying in advance, which affects the start date
  • We test before removal, since a negative result changes everything
  • Plastering and making good are normally separate jobs

If in doubt, ask: we will recommend a test, a survey or removal before booking.

What we deal with

  • Swirl and stipple patterns
  • Textured walls
  • Artex ceilings
  • Ceiling roses and cornices (coated)
  • Patched or painted coatings
  • Coated plasterboard

Service details

About our artex removal in Newtimber

According to HSE, textured coating work is normally non-licensed. Larger-scale removal using steam or gel is notifiable non-licensed work. From landlord refurbishments and coatings in the way of electrical work, we cover swirl patterns, coated plasterboard and Artex ceilings.

Rural homes near Newtimber have often been altered over generations, so coatings may date from earlier work. Work is planned to the Control of Asbestos Regulations 2012 and HSE guidance.

Location
Newtimber (BN6)
Area hub
West Sussex
Covers
Textured ceilings and walls
Afterwards
Result and waste note
Price
A written quote before work starts
Phone
07833 053 749
Last updated
26 October 2026
A surveyor with a sample bag and scraper indoors

For businesses and landlords in Newtimber

Contractors working for you need asbestos information before they start. HSE regularly reminds owners and trades of it.

Between tenancies is a good time to deal with asbestos, when rooms are empty and work can be done without disruption.

Choosing the right option

You’ll find DIY products for removing Artex, but if the coating contains asbestos, HSE guidance applies. Test first. How easy the material is to reach affects the price, so tell us about access.

What you get

  • Waste taken to a permitted site with a consignment note
  • Houses, flats and business premises
  • Clear advice on your options
  • Identify first, remove only when needed

Take a look at our prices page and published price ranges.

Should you do it yourself?

Fragile roofs are a serious falls risk, quite apart from the asbestos, so never climb onto one.

Power tools, sanding and jet-washing release the most fibres.

Materials, one by one

Artex ceilings

We test each different coating.

Ceiling roses and cornices

Decorative mouldings are sometimes coated too.

Why people call us in Newtimber

Coatings get damaged by water leaks, cracks and DIY, so they may start to flake.

If any of these sound familiar, it’s worth getting advice:

  • Extensions that cut into ceilings
  • Structural work through coated ceilings
  • Rented homes refurbished between tenants
  • Coatings in the way of electrical work

If you are refurbishing a rental near Hassocks station, coatings can be tested while the flat is empty.

Questions to ask before booking

  • Whether the job needs notifying
  • The documents you will receive
  • If the price includes VAT
  • Insurance appropriate to asbestos work

Read the checklist

Newtimber questions

Is asbestos common in Newtimber homes?

Any home in Newtimber built or refurbished before 2000 can contain asbestos, but you cannot tell by looking. Common places include garage roofs, textured ceilings, floor tiles, soffits and flues.

Do you work near Hassocks station?

Yes, we cover Newtimber and the area towards Hassocks station, about 2.4 miles north-east.

What if asbestos is found during building work?

Stop work in that area and keep people out, and the material needs identifying before work resumes.

How dangerous is asbestos?

Breathing in asbestos fibres can cause serious diseases, often decades later. The risk comes mainly from disturbing materials that contain it, so identifying it before work is important.

Can I plaster over Artex that contains asbestos?

It’s an option for an intact coating: skimming or boarding over avoids disturbing it. Never sand it beforehand, and record its location.

Do you work in flats?

We do. For shared areas, the managing agent or freeholder holds the asbestos information.

Does asbestos always have to come out?

No. Material in good condition that will not be disturbed can often be left and managed. It should be recorded and checked.

What does it cost to remove Artex?

Room sizes, the method and the waste decide, and we quote once the coating has been tested.

The process

We finish by cleaning the room thoroughly before the seals come down. The work area is kept clear while we’re working.

  1. Send photos of the textured surfaces
  2. We test a sample of each coating
  3. We explain your options: leave, cover or remove
  4. We remove it safely if that is what you choose
  5. The waste goes to a permitted site with a consignment note

How to prepare

  • Tell us about anything that’s already damaged
  • Clear belongings, but leave the material alone
  • Make sure pets and children are elsewhere

How to get a quote

Every job is quoted in writing. Use our quote form or call 07833 053 749 with the details, including any survey or test you already have.

Ask for a quote

Helpful guides

What affects the price in Newtimber

When we quote, we look at:

  • How many samples are needed
  • How much waste there is
  • How easy it is to reach
  • The quantity or area

Dealing with asbestos before building work is typically cheaper than finding it mid-job, when everything has to stop.

Photos that help

Photos often save us a visit:

  • A close-up from a safe distance
  • Labels, if any
  • Where we could park
  • Cracks or breaks

The quickest way to a quote is to send photos and the postcode: just send photos through our quote form, or phone 07833 053 749.

Textured ceilings in Newtimber

Newtimber is about 5 miles south-west of Burgess Hill, in West Sussex. We cover Newtimber as part of West Sussex, for Artex jobs of every size. We work in 371 places across West Sussex. We work right across the region, from Newtimber to Brighton (about 6 miles away).

In older homes in Newtimber, textured ceilings were often added in later decades. Parts of the South Downs National Park are within about 4 miles of Newtimber; cottages and farmhouses nearby can have textured coatings too.

Wherever your property is in BN6, we can help with Artex removal, from busy streets to quiet lanes. If your property is just outside Newtimber, we also cover Clayton (2 miles east), Hurstpierpoint (2 miles north), Hurst Wickham (2 miles north-east), Hassocks (2 miles north-east) and Keymer (3 miles north-east). Further out, we also cover Crawley (14 miles north), Horsham (12 miles north-west), Worthing (11 miles south-west), Haywards Heath (8 miles north-east), Burgess Hill (5 miles north-east) and Shoreham-by-Sea (6 miles south-west).

Nearby you’ll also find The Dene Hospital (4.2 miles north) and The Budding Foundation Museum of Gardening (2.1 miles north-east). The countryside around Newtimber includes Woods Mill and Wolstonbury Hill.

Map of Newtimber © OpenStreetMap contributors
  • Identify it first: we test or survey before planning removal
  • Work planned to the Control of Asbestos Regulations 2012 and HSE guidance
  • Paperwork for your records: reports, lab results and consignment notes
  • Waste sealed and labelled, then taken to a permitted site

How it works · Licensed or non-licensed? · Get a quote