A surveyor in a respirator putting a sample of loft material into a sealed bag

Hampshire · England

Artex Removal in Newton Valence

Artex removal in Newton Valence and across Hampshire: testing and removal of Artex and textured coatings.

  • Flaking textured ceilings
  • Ceilings coming down
  • Coatings in the way of electrical work

Ask for a quote Ring 07833 053 749

Need Artex removal in Newton Valence?

Artex removal for Newton Valence properties

Planning a renovation in Newton Valence with textured ceilings? Test them before rewiring, fitting downlights or plastering. People often contact us about loft conversions and flaking textured ceilings, including Artex ceilings, coated plasterboard and textured walls.

Village homes like those in Newton Valence have often been altered several times, so coatings may date from earlier work. Nothing is added to the job that you don’t need.

Workers in respirators bagging waste
Area
Newton Valence (GU34)
Region
Hampshire
Covers
Artex tested, then removed with wet methods
Paperwork
Lab result and consignment note
Quote
Written quote for your job
Phone
07833 053 749
Page updated
26 October 2026

Landlords, managing agents and employers

If you’re responsible for a non-domestic building or the common parts of flats in Newton Valence, you have a duty to manage asbestos under regulation 4 of the Control of Asbestos Regulations 2012. In practice: find it, assess it, record it and manage it.

For managing agents and freeholders in Newton Valence, the asbestos register for common parts should be kept up to date and shared with contractors.

Textured ceilings in Newton Valence

Newton Valence is about 4 miles south of Alton, in Hampshire. Homes, landlords and businesses in Newton Valence contact us for Artex jobs. We cover 683 places in Hampshire. Our area stretches from Newton Valence to Guildford (about 20 miles away).

If your home is one of the older properties in Newton Valence, near Church of St Mary or elsewhere, textured ceilings may date from an earlier renovation. Newton Valence is within about 7 miles of the South Downs National Park, and older rural homes there often have textured ceilings from past renovations.

We carry out Artex jobs all over GU34. Close by, we cover Selborne (1 mile east), Empshott (2 miles east), Lower Green (3 miles south-east), Hawkley (3 miles south-east) and Oakshott (3 miles south). Further out, we also cover Basingstoke (13 miles north-west), Winchester (15 miles west), Fleet (14 miles north-east), Horndean (13 miles south), Aldershot (14 miles north-east) and Alton (4 miles north).

Nearby you will also find Alton Community Hospital (3.4 miles north) and The Romany Museum (1.4 miles east). Within reach you’ll find Selborne Hill and Liss Riverside Railway Walk North.

Map of Newton Valence © OpenStreetMap contributors

Limits to be aware of

Every job has limits; these are the usual ones:

  • Plastering and making good are generally separate jobs
  • Other materials may need their own approach
  • Untested coatings are tested first, because a clear result means ordinary methods can be used

If in doubt, ask: we’ll recommend a test, a survey or removal.

Common materials

  • Coated plasterboard
  • Textured walls
  • Ceiling roses and cornices (coated)
  • Swirl and stipple patterns
  • Artex ceilings
  • Patched or painted coatings

Read more about the service

What it costs

What drives the price:

  • Access: height, lofts, steps and space
  • Disposal costs
  • Licensed or non-licensed
  • Location, parking and any London charges

We don’t publish a price list, because jobs vary so much. Our cost guides show published ranges, with dates and sources.

Photos that help

Photo tips:

  • The parking area
  • Damaged areas
  • The access route
  • Visible markings

Every job is quoted in writing. Use our quote form or call 07833 053 749 with the details.

The process

We finish by cleaning the room thoroughly before the seals come down. We go over the plan with you first, so you know what’s happening.

  1. Describe the coatings and rooms
  2. We sample each coating
  3. We plan the removal and send a quote
  4. The coating is removed with controls
  5. The room is cleaned and you get the paperwork

Getting ready

  • Do not disturb the material before we get there
  • Keep the area clear of children and pets
  • Clear belongings, but leave the material alone

Ask for a quote

Each job is priced individually. Call 07833 053 749 or use our quote form to get started.

Tell us what you need

Read more

What happens next

File the result and the paperwork.

To avoid problems in future:

  • Photos help us quote
  • Keep pets away
  • Give us room sizes
  • Keep the results and paperwork

Don’ts

Hold off on drilling until you have a result.

Don’t sand, scrape dry or wire-brush a textured coating before it’s been tested.

Questions from Newton Valence

Do you work on properties in the South Downs National Park?

Yes. The asbestos rules are the same in protected landscapes, though access to rural buildings may need planning.

Is the Artex in my Newton Valence home asbestos?

Some may, but many coatings do not contain asbestos. Only a test will tell you.

Does asbestos always have to come out?

No. Material in good condition that won’t be disturbed can often be left and managed. It should be recorded and checked.

Is a home built after 2000 likely to contain asbestos?

Asbestos was banned in 1999, so a home built after 2000 shouldn’t contain it, though older parts, reused materials or earlier outbuildings can.

Can asbestos go in my bin?

Never: it’s hazardous waste. We take it to a permitted site with paperwork.

Is asbestos dangerous?

Asbestos fibres can cause serious lung diseases years after exposure. The main risk is from disturbing it, which is why identifying it first matters.

How do I get a quote?

Start with the postcode and a description of the material. To do that, send photos through our quote form, or phone 07833 053 749.

Should I take the ceiling down instead?

It depends on the room and the condition of the ceiling. We will explain the options.

Which option is right?

Skimming over Artex is an option, but never sand it first, and the asbestos stays in the building. A test can sometimes save the cost of removal altogether, because the material is clear.

What you get

  • Lab analysis by an accredited laboratory
  • Identify first, remove only when needed
  • Domestic and commercial work
  • Jobs planned to HSE guidance

Read how we quote and the cost guide.

A closer look at the materials

Patched areas

Patches may be newer material.

Artex ceilings

A small sample from each different coating tells you whether it contains asbestos.

Why people call us in Newton Valence

Textured coatings continued to be made after asbestos was taken out of them, so a textured ceiling is not automatically asbestos.

These are some of the things we deal with in Newton Valence:

  • Loft conversions
  • Flaking textured ceilings
  • Ceilings due for plastering or skimming
  • Ceilings due to be knocked through or removed

If you are refurbishing a rental near Alton station, textured ceilings can be tested between tenancies.

Before booking anyone

  • Whether the work is licensed, notifiable non-licensed or non-licensed
  • That samples are analysed by an accredited laboratory
  • How fibres will be kept down
  • VAT, clearly stated

Read the checklist

  • Survey or test first when it isn’t clear what a material is
  • Done to the regulations: HSE guidance and CAR 2012
  • Everything in writing: quotes, reports, results and waste notes
  • Legal disposal at a permitted site, with a consignment note

How it works · Licensed or non-licensed? · Get a quote