Medway · England
Asbestos Artex Removal in Park Wood, Medway
Artex removal for Park Wood: testing and removal of Artex and textured coatings. Tell us what you’ve found and we’ll explain your options.
- Rented flats before redecoration
- Coatings damaged by leaks
- Structural work through coated ceilings
Artex removal for Park Wood
Artex removal near Park Wood
We remove textured coatings from ceilings, walls, ceiling roses and coated boards, across Park Wood. Typical jobs include extensions that cut into ceilings and ceilings due for rewiring or new downlights, including swirl patterns, coated plasterboard and Artex ceilings.
In Park Wood, textured coatings are often in several rooms, so each type needs testing. We only recommend work that is needed.
- Where
- Park Wood (ME8, ME9)
- Region
- Medway
- Covers
- Artex tested, then removed with wet methods
- You receive
- Test result and waste paperwork
- Price
- A written quote before work starts
- Phone
- 07833 053 749
- Page updated
- 26 October 2026
For businesses and landlords in Park Wood
If you’re responsible for a non-domestic building or the common parts of flats in Park Wood, you have a duty to manage asbestos under regulation 4 of the Control of Asbestos Regulations 2012. That means finding it, assessing it, recording it and planning how to manage it.
Letting agents often ask about asbestos before maintenance work. A test or survey gives a definite answer.
Artex in Park Wood homes
Park Wood is about 2 miles south-east of Gillingham, in Medway. Park Wood is part of the area we cover, from older terraces and semis to flats, workplaces and outbuildings. Park Wood is one of 68 places in Medway where we work. We work right across the region, from Park Wood to Canterbury (21 miles away).
For a school such as Park Wood Infant School, the duty holder’s records should show any coatings, before decorators start. Older homes across Park Wood may have coatings added during past renovations. Park Wood is within about 6 miles of the Kent Downs National Landscape, and older rural homes there often have textured ceilings from past renovations.
We cover Artex jobs across ME8 and ME9 and the streets around it. Local streets include Beke Road, Bond Road and Nares Road; we cover every one. For properties just outside Park Wood, we cover Wigmore (1 mile north), Kemsley Street (1 mile south-west), Hempstead (1 mile west), Bredhurst (1 mile south-west) and Scragged Oak (2 miles south). Further out, we also cover Chatham (3 miles west), Rochester (5 miles north-west), Strood (6 miles north-west), Luton (3 miles north-west), Hoo St Werburgh (6 miles north) and Chatham Waterfront (4 miles north-west). Park Wood is among the bigger towns we cover in Medway, with every kind of building, from homes to workplaces.
Nearby you’ll also find Medway Maritime Hospital (3.4 miles north-west). Green spaces nearby include Bishop Saltings and Detling Hill.
- Schools near Park Wood include Rainham School for Girls (1.1 miles north) and Howard School (1.2 miles north)
What it might be made of
Patched areas
Patch repairs may use a different material from the original coating.
Artex ceilings
Swirl, stipple and other patterns on ceilings are the most common textured coatings.
After the job
After removal, the room is cleaned and the waste goes to a permitted site, and you get the paperwork.
Keeping things safe:
- Keep pets out of the work area
- Photos help us quote
- Empty the rooms in advance
- Book your plasterer after removal
Things not to do
Do not try DIY removal products on untested coatings.
Do not use a steamer or chemical stripper on an untested coating.
Can I do it myself?
Found something mid-DIY? Stop: keep people away, don’t sweep or vacuum it up, and get advice.
HSE’s advice to the public is not to try to repair or remove asbestos yourself. Higher-risk materials such as lagging, sprayed coatings and most insulating board must only be dealt with by an HSE-licensed contractor.
Step by step
On the day, we seal off the room and protect floors and fittings, and keep the coating damp as we work. If anything unexpected turns up, we stop and talk to you.
- Send photos of the textured surfaces
- We arrange testing
- We explain your options: leave, cover or remove
- We carry out the removal
- The waste goes to a permitted site with a consignment note
Before we arrive
- Make sure we can get to the area
- Keep the area clear of children and pets
- Let us know where we can park
Get a quote
For a quote, ring 07833 053 749, or send the details through our contact page. Tell us the postcode, what the material is and where, and send photos if you can.
Related guides
Towns and villages near Park Wood
Other services in Park Wood
Common reasons for Artex jobs in Park Wood
Most problems come during renovation: sanding to smooth a ceiling, scraping it off dry or drilling for lights.
Common situations in older properties include:
- Ceilings before skimming
- Flaking textured ceilings
- Coatings in the way of electrical work
- Structural work through coated ceilings
If you’re refurbishing flats near Rainham (Kent) station, coatings can be tested while the flat is empty.
Comparing quotes
- That samples are analysed by an accredited laboratory
- Whether the job needs notifying
- What exactly is included: the areas, materials or samples
- The documents you’ll receive
Options to consider in Park Wood
A low price may mean shortcuts, which releases fibres. Ask about the method and the waste. The cost of Artex removal depends on the job: the materials involved, how much there is, access and paperwork. We quote each job individually.
What you get
- Plain-English advice, including when to leave things alone
- Quotes that spell out the scope
- Samples analysed by an accredited laboratory
- Waste paperwork for every removal
Take a look at how we price jobs or the cost guide.
What we do and do not cover
Some limits to bear in mind:
- We need the room cleared
- We test before removal, because a clear result means ordinary methods can be used
- We leave the surface ready for your plasterer
Not sure what you need? Send us photos and we will tell you honestly.
Materials we see
- Coated plasterboard
- Patched or painted coatings
- Ceiling roses and cornices (coated)
- Swirl and stipple patterns
- Artex ceilings
- Textured walls
FAQs for Park Wood
Do older homes in Park Wood have asbestos?
If your home in Park Wood was built or refurbished before 2000, it may, but only a test can confirm it. Look at garage roofs, textured ceilings, old floor tiles, soffits and flues.
Is the Artex in my Park Wood home asbestos?
Some may, but many coatings don’t contain asbestos. Only a test will tell you.
Do I need to move out during Artex removal?
The work room is sealed and kept clear. Often you can stay in other rooms.
Do I need a test or a survey?
A test checks specific materials; a survey checks a whole building or work area. Before building work, you normally need a survey.
What does licensed work mean?
It covers the higher-risk materials: pipe lagging, sprayed coatings and most insulating board. Only a contractor holding an HSE licence can do it.
What paperwork will I get?
A survey report, laboratory results or a waste consignment note, depending on the job.
Can you advise before I buy a property?
Of course. A pre-purchase survey, arranged with the seller’s permission, shows what asbestos is there before you exchange.
Do you work in Park Wood?
Yes, we do: our area includes Park Wood and the places around it. Send the postcode and a few photos and we’ll quote.
- Survey or test first when it isn’t clear what a material is
- Done to the regulations: HSE guidance and CAR 2012
- Paperwork for your records: reports, lab results and consignment notes
- Waste sealed and labelled, then taken to a permitted site