A surveyor in a respirator putting a sample of loft material into a sealed bag

Kent · England

Asbestos Artex Removal in Rodmersham, Kent

Artex removal across Rodmersham, for houses, flats and commercial buildings. Every job is quoted in writing.

  • Textured walls before a refit
  • Flaking textured ceilings
  • Landlord refurbishments

Get a quote Call 07833 053 749

Artex removal in Rodmersham

Artex removal in Rodmersham

Planning a renovation in Rodmersham with textured ceilings? Test them before rewiring, fitting downlights or plastering. From coatings in the way of electrical work and landlord refurbishments, we deal with Artex ceilings, stipple finishes and coated ceiling roses.

In a village like Rodmersham, textured coatings turn up in cottages and later homes alike. If you are unsure what you need, ask: we will recommend a test, a survey or removal, whichever fits.

Area
Rodmersham (ME9)
Region
Kent
Covers
Artex tested, then removed with wet methods
Afterwards
Test result and waste paperwork
Quotes
Quoted individually, in writing
Phone
07833 053 749
Updated
26 October 2026
Three workers in coveralls, full-face respirators and gloves lowering a cracked cement sheet into a heavy-duty waste bag behind barrier tape

Landlords, managing agents and employers

If you’re responsible for a non-domestic building or the common parts of flats in Rodmersham, you have a duty to manage asbestos under regulation 4 of the Control of Asbestos Regulations 2012. In practice: find it, assess it, record it and manage it.

If you own a block of garages or outbuildings that you let should find out whether the roofs are asbestos cement, before anyone carries out repairs.

Step by step

We soften the coating and take it off by hand, with no sanding or dry scraping. Our team uses the right protective equipment, and use controls to keep dust down.

  1. Get in touch with photos
  2. We test a sample of each coating
  3. We talk through the options
  4. We carry out the removal
  5. We dispose of the waste legally

Before we arrive

  • Tell us about parking and access
  • Find any old asbestos reports
  • Clear the way to the work area

Getting a price

Each job is priced individually. Fill in the enquiry form or give us a call on 07833 053 749 to get started.

Ask for a quote

Helpful guides

Artex in Rodmersham homes

Rodmersham is about 2 miles south-east of Sittingbourne, in Kent. Anywhere in Rodmersham, just send the postcode. Rodmersham is one of 922 towns and villages in Kent where we work. We work right across the region, from Rodmersham to Canterbury (14 miles away).

For a school such as Rodmersham School, the duty holder’s records should show any coatings, before decorators start. In older homes in Rodmersham, textured ceilings were often added in later decades. Parts of the Kent Downs National Landscape are within about 7 miles of Rodmersham; cottages and farmhouses nearby can have textured coatings too.

This part of Kent takes in ME9. We also carry out Artex jobs in Bapchild (1 mile south), Rodmersham Green (1 mile west), Highsted (1 mile west), Radfield (1 mile north-east) and Newbury (1 mile south). We also cover nearby towns such as Maidstone (11 miles west), Ashford (13 miles south), Canterbury (14 miles east), Whitstable (12 miles east), Faversham (5 miles east) and Minster (7 miles north).

Nearby you’ll also find Sittingbourne Heritage Museum (1.4 miles north-west) and Bayford Court (1.6 miles north-west).

  • Nearby schools include The Sittingbourne School (0.8 miles north)
  • Parks and local facilities nearby include Sittingbourne and Milton Urban District (2.3 miles north-west)
Map of Rodmersham © OpenStreetMap contributors

What it costs

The cost depends on:

  • Parking and access charges
  • Access: height, lofts, steps and space
  • The type of material and its condition
  • Disposal costs

Access makes a big difference to cost, so tell us about access.

What to photograph

To help us quote quickly, send:

  • Approximate dimensions
  • Where we could park
  • The access route
  • Cracks or breaks

Photos and a postcode help us quote quickly: fill in the enquiry form or give us a call on 07833 053 749.

What we deal with in Rodmersham

Renovations disturb coatings: sanding, dry scraping or drilling.

Asbestos can be in plenty of places in buildings from before 2000. Typical situations are:

  • Coatings in the way of electrical work
  • Ceilings coming down
  • Walls before a kitchen or bathroom refit
  • Coatings damaged by DIY

For rented flats close to Sittingbourne station, textured ceilings can be tested between tenancies.

Comparing quotes

  • If the price includes VAT
  • What category of work it is
  • How the work will be done, and the controls used
  • The documents you will receive

Choosing an asbestos contractor

Which option is right?

What are the options for Artex? If it’s intact and no work will go through it, leaving or covering can make sense; if you want smooth ceilings or need to cut into it, removal is generally better. What you pay depends on the job itself: the materials involved, how much there is, access and paperwork. Every quote is individual.

How we work in Rodmersham

  • Work done to the regulations
  • Lab analysis by an accredited laboratory
  • Identify first, remove only when needed
  • Homes, rented property and workplaces

See how we quote or published price ranges.

A closer look at the materials

Painted coatings

Paint often hides the coating, but the coating underneath is the same.

Coated plasterboard

Coatings are applied over plasterboard or plaster. Removing the boards can be an option.

Doing it yourself?

HSE’s advice to the public is not to try to repair or remove asbestos yourself. Licensed materials are strictly for licensed contractors.

Sanding, drilling, cutting and jet-washing are the worst things you can do to asbestos materials, so avoid them completely.

Rodmersham questions

Do you cover small places like Rodmersham?

Yes. We cover villages and hamlets as well as towns. Tell us about access and parking.

Do you cover Rodmersham and the area around Sittingbourne station?

Yes, we cover Rodmersham and the area towards Sittingbourne station, about 1.8 miles north-west.

Can you help a business or landlord?

We do. Landlords, agents, businesses and builders all use our services.

What’s the difference between a test and a survey?

A test checks specific materials; a survey checks a whole building or work area. Before building work, you normally need a survey.

What does it cost to remove Artex?

Room size, method and waste all affect the price. We quote once we know what it contains.

When can you start?

That depends on the work and current bookings. We will give you dates when we quote, and notifiable work needs notifying before it starts.

Can I sand my Artex ceiling smooth?

Only once you know it’s clear. Sanding or dry scraping an asbestos coating releases fibres.

Is my textured ceiling in Rodmersham asbestos?

Not necessarily, as many do not. The only way to know is to test a sample.

Good to know

So you know what to expect:

  • The room being worked on has to be empty and sealed off
  • Larger-scale steam or gel removal must be notified before it starts, which affects the start date
  • Plastering and making good are generally separate jobs

Not sure what you need? Send us photos and we will tell you honestly.

Common materials

  • Patched or painted coatings
  • Coated plasterboard
  • Textured walls
  • Ceiling roses and cornices (coated)
  • Swirl and stipple patterns
  • Artex ceilings

Service details

  • Identify it first: we test or survey before planning removal
  • Done to the regulations: HSE guidance and CAR 2012
  • Written paperwork: reports, results and waste consignment notes
  • Legal disposal at a permitted site, with a consignment note

How it works · Licensed or non-licensed? · Get a quote