A surveyor in a respirator putting a sample of loft material into a sealed bag

Kent · England

Asbestos Artex Removal in Ruckinge, Kent

Artex removal across Ruckinge and nearby, for homes, rented property and workplaces. Planned to HSE guidance, with written results and paperwork.

  • Coatings scraped during DIY
  • Ceilings coming down
  • Walls before tiling

Get a quote Call 07833 053 749

Artex removal in Ruckinge

A textured ceiling in good condition is low risk if it’s left alone. The problem comes when it’s sanded, scraped dry, drilled or knocked through during a renovation, which is why testing first matters in Ruckinge. Typical materials include swirl patterns, coated ceiling roses and Artex ceilings, and people normally contact us about coatings already disturbed and structural work through coated ceilings.

Rural homes near Ruckinge have often been altered over generations, so ceilings may have been coated during an earlier renovation. Small jobs get the same care as big ones, with the same attention to the regulations.

Waste being bagged by workers in full protective equipment
Area
Ruckinge (TN26)
Region
Kent
Service
Textured ceilings and walls
Paperwork
Test result and waste paperwork
Quote
Written quote for your job
Telephone
07833 053 749
Page updated
26 October 2026

Textured ceilings in Ruckinge

Ruckinge is about 5 miles south of Ashford, in Kent. We cover Ruckinge as part of Kent, for Artex jobs of every size. We work in 922 places across Kent. You can also see our page for Canterbury, about 17 miles away.

If you’re refurbishing a rental near Ham Street station, coatings can be tested while the flat is empty.

We cover Artex jobs across the TN26 postcode area. We can help with Artex jobs on streets such as Oak Ridge and Hamstreet Road or the roads around them, wherever it is in Ruckinge. We also carry out Artex jobs in Hamstreet (1 mile west), Stone Cross (2 miles north), Orlestone (2 miles north-west), Bromley Green (3 miles north-west) and Kenardington (3 miles west). Further out, we also cover Ashford (5 miles north), Folkestone (12 miles east), Hythe (8 miles east), Hawkinge (12 miles east), Tenterden (9 miles west) and Cheriton (11 miles east).

Well-known places in the area include William Harvey Hospital (5.3 miles north). Green spaces nearby include Orlestone Forest.

Map of Ruckinge © OpenStreetMap contributors

After the job

We clean the room and dispose of the waste legally, with a consignment note.

Once you know what’s there, a few simple habits help:

  • Send photos of the coatings
  • Book your plasterer after removal
  • Test every different coating
  • Plan where you will stay or work while rooms are closed off

Avoid these

Keep away from flaking or fallen coating.

Keep away from flaking or fallen coating and ask for advice.

Step by step

If we’re taking the boards down instead, they’re removed whole where possible. We keep the work area clear of other people while we work, so children and pets should be kept elsewhere.

  1. Tell us where the textured ceilings and walls are
  2. We sample each different coating for testing
  3. If asbestos is found, we explain the options and quote
  4. We seal off each room and remove the coating wet, or take the boards down whole
  5. The room is cleaned and the waste goes to a permitted site with paperwork

Before we arrive

  • Tell neighbours if the work is close to their property
  • Clear belongings, but leave the material alone
  • Clear the way to the work area

Getting a price

Share the postcode, a short description and photos: fill in the enquiry form or give us a call on 07833 053 749.

Get a quote

Related guides

Materials we deal with

Artex ceilings

We test each different coating.

Textured walls

Some walls were also given textured finishes.

Options to consider in Ruckinge

Remove the coating, or the whole ceiling? Each has pros and cons, depending on the room. Compare what each quote includes, not just the total: the scope, the method, the waste and the paperwork.

What you get

  • Covering London and the South East
  • Homes, rented property and workplaces
  • No removal until we know what it is
  • Waste paperwork for every removal

See how we quote or our cost guide.

Where asbestos turns up

Renovations disturb coatings: sanding to smooth a ceiling, scraping it off dry or drilling for lights.

These are the materials and situations that most often lead to Artex jobs:

  • Loft conversions
  • Coatings already disturbed
  • Flaking textured ceilings
  • Ceilings due for rewiring or new downlights

If your home is one of the older properties in Ruckinge, near Church of St Mary Magdalene or elsewhere, textured ceilings may date from an earlier renovation.

Before booking anyone

  • Laboratory analysis by an accredited lab
  • Any exclusions
  • What you’ll receive afterwards: a report, results or waste paperwork
  • For licensed work, a valid HSE licence

Choosing an asbestos contractor

Can I do it myself?

Found something mid-DIY? Stop: keep people away, do not sweep or vacuum it up, and get advice.

A professional job comes with paperwork: a record that buyers, insurers and builders may want to see.

Good to know

So you know what to expect:

  • Other materials may need their own approach
  • We need the room cleared
  • We leave the surface ready for your plasterer

Not sure what you need? Send us photos and we will tell you honestly.

What we deal with

  • Textured walls
  • Swirl and stipple patterns
  • Ceiling roses and cornices (coated)
  • Artex ceilings
  • Patched or painted coatings
  • Coated plasterboard

More about this service

FAQs for Ruckinge

Do you cover Ruckinge from London?

We cover Ruckinge, about 52 miles from central London.

Do you work near Ham Street station?

Yes. Ham Street station is about 1.5 miles west of Ruckinge, and we cover both.

Do you work on commercial premises?

We do, alongside homes. The duty holder should be able to share the asbestos register.

What if asbestos is found during building work?

Stop work in that area and keep people out, and the material needs identifying before work resumes.

What does licensed work mean?

Work on higher-risk materials, such as lagging, sprayed coatings and most insulating board, is licensed and must be done by an HSE-licensed contractor. Most asbestos cement and textured coatings are non-licensed or notifiable non-licensed.

What if the weather’s bad?

Indoor work isn’t affected. Outdoor roof work can be delayed by strong wind or heavy rain.

Will I get the price in writing?

Yes, always, including whether VAT is included.

Does all Artex contain asbestos?

Not necessarily: many textured coatings do not contain asbestos. The only way to know is to test a sample.

For landlords, agents and businesses

Contractors working for you need asbestos information before they start. HSE’s campaigns stress this point to building owners and trades alike.

Between tenancies is a good time to deal with asbestos, while the property is empty.

  • Survey or test first when it isn’t clear what a material is
  • Planned to HSE guidance and the Control of Asbestos Regulations 2012
  • Written paperwork: reports, results and waste consignment notes
  • Asbestos waste double-bagged or wrapped and taken to a permitted site

How it works · Licensed or non-licensed? · Get a quote