East Sussex · England
Artex Removal for Rye Harbour
Artex removal across Rye Harbour, for houses, flats and commercial buildings. You get a written quote before anything starts.
- Ceilings due for plastering or skimming
- Walls before tiling
- Structural work through coated ceilings
Artex removal for Rye Harbour
Artex removal near Rye Harbour
Sometimes it’s simpler to take the ceiling boards down whole than to strip the coating. We will talk you through the options for your rooms in Rye Harbour. Typical materials include coated plasterboard, stipple finishes and coated ceiling roses, and people usually contact us about structural work through coated ceilings and coatings in the way of electrical work.
In places like Rye Harbour, textured ceilings appear in older and newer homes, often added during past renovations. Clear answers come first: what the material is, and what that means for your plans.
- Where
- Rye Harbour (TN31)
- County
- East Sussex
- What we do
- Testing and removal of textured coatings
- You receive
- Lab result and consignment note
- Price
- Quoted individually, in writing
- Call
- 07833 053 749
- Updated
- 26 October 2026
Choosing the right option
Testing first can save a lot: if the coating is clear, ordinary methods can be used. What you pay depends on the job itself: the materials involved, how much there is, access and paperwork. Every quote is individual.
How we work in Rye Harbour
- Lab analysis by an accredited laboratory
- Work done to the regulations
- Waste paperwork for every removal
- Quotes that spell out the scope
See how we quote or our cost guide.
Common reasons for Artex jobs in Rye Harbour
Textured coatings were popular for decades because they hid cracks and uneven plaster, and some included a little chrysotile.
Buildings from before 2000 can hide asbestos in many places. Common situations include:
- Ceilings before downlights go in
- Extensions that cut into ceilings
- Ceilings before skimming
- Coatings damaged by leaks
For rented flats close to Rye station, textured ceilings can be tested between tenancies.
What to look for in a quote
- Insurance appropriate to asbestos work
- How the work will be done, and the controls used
- What category of work it is
- Proof of an HSE licence where it’s needed
Materials, one by one
Ceiling roses and cornices
They’re included in the test if they’re coated.
Painted coatings
We sample through the paint into the coating.
What happens
We wear disposable coveralls and suitable respirators, and keep the room closed while we work. On the day, we check the area and talk you through the plan first.
- Send photos of the textured surfaces
- We test a sample of each coating
- We talk through the options
- We carry out the removal
- We dispose of the waste legally
Getting ready
- Tell neighbours if the work is close to their property
- Mention any damage before we arrive
- Move things out of the way carefully
How to get a quote
The quickest way to a quote is to send photos and the postcode: just ring 07833 053 749, or send the details through our contact page.
Helpful guides
Nearby places to Rye Harbour
Questions from Rye Harbour
Do you cover Rye Harbour from London?
Rye Harbour is about 54 miles from central London, well within our area.
Do older homes in Rye Harbour have asbestos?
Any home in Rye Harbour built or refurbished before 2000 can contain asbestos, but you can’t tell by looking. Look at garage roofs, textured ceilings, old floor tiles, soffits and flues.
How can I get a price?
Send us the details: the postcode, what you’ve found and where it is. Then send photos through our quote form, or phone 07833 053 749.
Is Artex removal licensed work?
Normally not, according to HSE. Larger-scale removal using steam or gel is notifiable non-licensed work.
How quickly can you come out?
We agree a date when you accept the quote. Some work has to be notified to the enforcing authority first, which affects timing.
What paperwork will I get?
A survey report, laboratory results or a waste consignment note, depending on the job.
Can I plaster over Artex that contains asbestos?
It’s an option for an intact coating: covering it leaves it undisturbed. Do not sand it first, and keep a record that it’s there.
Does asbestos always have to come out?
Not always. If it’s in good condition and nobody will disturb it, leaving it in place and checking it can be the safer choice.
What happens next
Tell your plasterer and electrician what was done.
To avoid problems in future:
- Plan around the closed rooms
- Photos help us quote
- Each different coating needs testing
- Tell us which rooms and roughly how big they are
Avoid these
Test before the builders arrive.
Do not sand, scrape dry or wire-brush a textured coating before it’s been tested.
Duty holders and landlords in Rye Harbour
Void periods are a good time for asbestos work, while the property is empty.
Landlords of single homes don’t have the same duty to manage as non-domestic duty holders, but contractors still need to know about asbestos before they work.
How we price Artex removal
When we quote, we look at:
- How easy it is to reach
- How much waste there is
- Location, parking and any London charges
- The category of work
Access makes a big difference to cost, so tell us about access.
Sending photos
Photo tips:
- A photo of the whole area
- Street parking nearby
- Labels, if any
- A rough size or measurement
Unsure whether you need a test, a survey or removal? Call 07833 053 749 or use our quote form, and we will advise.
Textured ceilings in Rye Harbour
Rye Harbour is about 10 miles north-east of Hastings, in East Sussex. Rye Harbour is within our East Sussex area, whatever the size of the job. Rye Harbour is one of 289 places in East Sussex where we work. We work right across the region, from Rye Harbour to Canterbury (27 miles away).
In older homes in Rye Harbour, textured ceilings were often added in later decades. A school like Rye College should know from its asbestos register whether coatings have been tested, before decorators start. The coast is within about 2 miles of Rye Harbour, though indoor coating work goes ahead whatever the weather.
Wherever your property is in TN31, we can help with Artex removal, from busy streets to quiet lanes. Streets in the area include Tram Road, Camber Road and Oyster Creek, and Artex removal is available on all of them. Neighbouring places we cover include Rye (1 mile north-west), Camber (1 mile east), East Guldeford (1 mile north), Playden (2 miles north-west) and Houghton Green (2 miles north). Within a short drive, we also work in Hastings (10 miles south-west), Bexhill-on-Sea (14 miles south-west), St Leonards (11 miles south-west), Hastings Old Town (9 miles south-west), Belmont (9 miles south-west) and Hollington (10 miles south-west).
Well-known places in the area include Rye Castle Museum (East Street) (1.3 miles north-west) and Camber Castle (1.2 miles west). Within reach you will find Rye Harbour Nature Reserve.
- Nearby, you will find Inkerman Arms (within half a mile south)
Good to know
To be clear about the scope:
- Plastering and making good are typically separate jobs
- Untested coatings are tested first, since a negative result changes everything
- We need the room cleared
If you are unsure, describe the job and send photos, and we will advise before you book.
Materials in Rye Harbour
- Patched or painted coatings
- Ceiling roses and cornices (coated)
- Textured walls
- Artex ceilings
- Coated plasterboard
- Swirl and stipple patterns
- Identify it first: we test or survey before planning removal
- Done to the regulations: HSE guidance and CAR 2012
- Everything in writing: quotes, reports, results and waste notes
- Legal disposal at a permitted site, with a consignment note