Hampshire · England
Artex Removal in Sandy Down
Any pre-2000 building in Sandy Down may contain asbestos. We offer testing and removal of Artex and textured coatings.
- Ceilings before downlights go in
- Damaged or cracked coatings
- Ceilings due for plastering or skimming
Need Artex removal in Sandy Down?
Common reasons for Artex jobs in Sandy Down
Textured coatings were popular for decades because they hid cracks and uneven plaster, and some contained a small amount of white asbestos (chrysotile) for strength.
You cannot tell by looking, but these are common reasons people contact us:
- Ceilings before downlights go in
- Loft conversions and extensions
- Rented flats before redecoration
- Flaking textured ceilings
For rented flats close to Brockenhurst station, a void period is a good time to deal with textured ceilings.
What to look for in a quote
- Whether the work is licensed, notifiable non-licensed or non-licensed
- Waste disposal and the consignment note
- The scope of the job, in writing
- What’s excluded, such as making good or a new roof
Artex removal in Sandy Down
Artex and similar coatings are common on ceilings in Sandy Down, and older ones can contain a little asbestos. We test first, then remove the coating with controlled wet methods if needed. From landlord refurbishments and textured walls before a refit, we deal with Artex ceilings, textured walls and swirl patterns and more.
Rural homes near Sandy Down have often been altered over generations, so ceilings may have been coated during an earlier renovation. We identify materials before planning removal, as the right approach depends on the material.
- Area
- Sandy Down (SO41)
- Region
- Hampshire
- What we do
- Textured ceilings and walls
- You receive
- Lab result and consignment note
- Quotes
- Written quote for your job
- Phone
- 07833 053 749
- Last updated
- 26 October 2026
A closer look at the materials
Patched areas
We may sample patches separately.
Painted coatings
Many coatings have been painted over, which doesn’t change what’s underneath.
For businesses and landlords in Sandy Down
Letting agents often ask about asbestos before maintenance work. A test or a survey gives everyone a clear answer.
Contractors working for you need asbestos information before they start. HSE regularly reminds owners and trades of it.
Looking after things afterwards
Share the paperwork with your trades.
Once you know what’s there, a few simple habits help:
- Plan around the closed rooms
- Each different coating needs testing
- Empty the rooms in advance
- Line up the plasterer for afterwards
Don’ts
Never sand or dry-scrape Artex before testing.
Hold off on drilling until you have a result.
FAQs for Sandy Down
Do you cover Sandy Down and the area around Brockenhurst station?
Yes, we cover Sandy Down and the area towards Brockenhurst station, about 1.6 miles north.
Do older homes in Sandy Down have asbestos?
If your home in Sandy Down was built or refurbished before 2000, it may, but you cannot tell by looking. Common places include garage roofs, textured ceilings, floor tiles, soffits and flues.
How much does Artex removal cost in Sandy Down?
It depends on the area, the method and the waste, and we quote once the coating has been tested.
Is it OK to scrape off Artex?
Not before testing. Sanding or dry scraping an asbestos coating releases fibres.
What if the weather’s bad?
That depends: indoor work carries on, while outdoor roof work may be postponed in strong wind or heavy rain.
Is it better to remove the coating or the ceiling?
Either can work: it depends on the room and the condition of the ceiling. We’ll recommend one for each room.
Do I need to move out during Artex removal?
The work room is sealed and kept clear. Often you can stay in other rooms.
Can you quote from photos?
Many jobs can be quoted from photos, though some need a visit first.
Prices and what affects them
These are the main things that affect the price of Artex removal:
- Parking and access charges
- Access to the area
- The quantity or area
- The number of samples or the size of the building
We don’t publish a price list, because jobs vary so much. Our guides list published price ranges from other companies, with sources.
Sending photos
A few photos can save a site visit:
- Where we could park
- A photo of the whole area
- Approximate dimensions
- The access route
Photos taken from a safe distance are fine: do not touch the material, just send them through our quote form.
Artex in Sandy Down homes
Sandy Down is about 3 miles north of Lymington, in Hampshire. Homes, landlords and businesses in Sandy Down contact us for Artex jobs. Sandy Down is one of 683 towns and villages in Hampshire where we work. You can also see our page for Southampton, about 11 miles away.
In older homes in Sandy Down, textured ceilings were often added in later decades. Parts of the New Forest National Park are within about 2 miles of Sandy Down, and older rural homes there often have textured ceilings from past renovations. The coast is within about 4 miles of Sandy Down, though indoor coating work goes ahead whatever the weather.
We handle Artex jobs in every part of the SO41 postcode area and the streets around it. From Sandy Down, Lower Sandy Down and Hurstly Lane or anywhere nearby, the process is the same. For properties just outside Sandy Down, we cover Battramsley (1 mile south), Boldre (1 mile south-east), Mount Pleasant (1 mile south-west), Pilley (1 mile south-east) and Warborne (2 miles south-east). Further out, we also cover Eastleigh (15 miles north-east), Totton (9 miles north), Chandler's Ford (15 miles north-east), Hedge End (14 miles north-east), Lymington (3 miles south) and Romsey (14 miles north).
Other landmarks nearby include Lymington New Forest Hospital (1.9 miles south) and St Barbe Museum and Art Gallery (2.6 miles south). Within reach you will find Boldre Foreshore.
- Nearby, you’ll find The Hobler Public House (less than half a mile south-west)
Options to consider in Sandy Down
Remove the coating, or the whole ceiling? Each has pros and cons, depending on the room. How easy the material is to reach affects the price, so photos of the area and the way in help us quote accurately.
Why people choose us
- No removal until we know what it is
- Accredited laboratory results
- Work planned to HSE guidance and the regulations
- Houses, flats and business premises
Take a look at how we quote or published price ranges.
What’s included, and what is not
Worth knowing before you book:
- Untested coatings are tested first, since a negative result changes everything
- We need the room cleared
- Other asbestos materials found in the room are dealt with separately
If you’re unsure, describe the job and send photos, and we will advise before booking.
What we deal with
- Artex ceilings
- Swirl and stipple patterns
- Ceiling roses and cornices (coated)
- Textured walls
- Coated plasterboard
- Patched or painted coatings
How we work
We soften the coating and take it off by hand, with no sanding or dry scraping. It helps if we can park nearby.
- Describe the rooms and coatings
- We test the coating if it hasn’t been tested
- We plan the method and quote
- We seal the room and remove the coating with wet methods
- The waste is bagged, the room cleaned and the waste taken to a permitted site
Getting ready
- Leave the suspect material alone until we arrive
- Ensure we can get to the area
- Let us know if something’s broken
Get a quote
Tell us about the material, its location and your plans. Call 07833 053 749 or use our quote form.
Helpful guides
Nearby places to Sandy Down
Other services in Sandy Down
- Identify it first: we test or survey before planning removal
- Planned to HSE guidance and the Control of Asbestos Regulations 2012
- Paperwork for your records: reports, lab results and consignment notes
- Waste sealed and labelled, then taken to a permitted site