A surveyor in a respirator putting a sample of loft material into a sealed bag

Kent · England

Asbestos Artex Removal in Stanhope, Kent

Artex removal in Stanhope, from older homes to workplaces. Every job is quoted in writing.

  • Textured walls before a refit
  • Ceilings before skimming
  • Damaged or cracked coatings

Ask for a quote Phone 07833 053 749

Artex removal near Stanhope

How artex removal works in Stanhope

Artex and similar coatings are common on ceilings in Stanhope, and those applied before 2000 can contain a small amount of asbestos. We test the coating, then remove it safely if it contains asbestos. Common materials are swirl patterns, stipple finishes and textured walls, and typical jobs are ceilings due for rewiring or new downlights and structural work through coated ceilings.

In towns and villages like Stanhope, textured ceilings are a common renovation find, and testing comes first. You get written paperwork for every job: a report, laboratory results or a waste consignment note, so you have a record.

Three workers in coveralls, full-face respirators and gloves lowering a cracked cement sheet into a heavy-duty waste bag behind barrier tape
Where
Stanhope (TN23)
Area hub
Kent
What we do
Artex tested, then removed with wet methods
Afterwards
Result and waste note
Quote
Quoted individually, in writing
Phone
07833 053 749
Updated
26 October 2026

Common questions in Stanhope

Do older homes in Stanhope have asbestos?

Any home in Stanhope built or refurbished before 2000 can contain asbestos, but only a test can confirm it. Garage roofs, Artex, floor tiles, soffits and flues are typical examples.

How far is Stanhope from London?

Stanhope is about 48 miles from central London, well within our area.

What should I do if I’ve disturbed asbestos?

Stop, keep people away from the area and do not sweep or vacuum up debris. Then get advice.

Do I need to be at home?

We need access to every area involved in the job, and it helps if you are around to answer questions.

Do you need a licence to remove Artex?

Normally not, according to HSE. Larger-scale removal using steam or gel is notifiable non-licensed work.

What does it cost to remove Artex?

Room sizes, the method and the waste decide, so we quote after testing.

Do you work in flats?

Yes. For shared areas, ask the managing agent about the asbestos register.

Can you help a business or landlord?

We do. We work for landlords, managing agents, employers and contractors as well as homeowners.

For businesses and landlords in Stanhope

Between tenancies is a good time to deal with asbestos, while the property is empty.

Landlords of single homes don’t have the same duty to manage as non-domestic duty holders, but contractors still need to know about asbestos before they work.

The process

We start by sealing and protecting the room, then keep the coating wet throughout. On the day, we check the area and talk you through the plan first.

  1. Get in touch with photos
  2. We test a sample of each coating
  3. We explain your options: leave, cover or remove
  4. We carry out the removal
  5. The waste goes to a permitted site with a consignment note

How to prepare

  • Find any old asbestos reports
  • Mention any parking restrictions
  • Tell us about anything that is already damaged

Get a quote

Send us the address in Stanhope, a description and some photos: use our quote form or call 07833 053 749.

Get a quote

Read more

Options to consider in Stanhope

Test, leave, cover or remove? If it’s intact and no work will go through it, leaving or covering can make sense; if you want smooth ceilings or need to cut into it, removal is generally better. Dealing with asbestos before building work is typically cheaper than finding it mid-job, when the whole project can be held up.

What you get

  • Written quotes that say what’s included
  • Domestic and commercial work
  • Lab analysis by an accredited laboratory
  • Across London and the South East

See how we price jobs or the cost guide.

What happens next

The ceiling or wall is left ready for your plasterer.

Once we’re done:

  • Tell us which rooms and roughly how big they are
  • Plan around the closed rooms
  • Test every different coating
  • Clear the rooms before the work

What to avoid

Test before the builders arrive.

Never sand or dry-scrape Artex before testing.

Materials, one by one

Artex ceilings

Patterned ceilings are the classic example.

Coated plasterboard

Coatings are applied over plasterboard or plaster. Removing the boards can be an option.

What we deal with in Stanhope

Many trades want a test result first.

You cannot tell by looking, but these are common reasons people contact us:

  • Damaged or cracked coatings
  • Ceilings coming down
  • Coatings scraped during DIY
  • Ceilings before plastering

If your home is one of the older properties in Stanhope, near St. Francis or elsewhere, textured ceilings may date from an earlier renovation.

What to look for in a quote

  • Any exclusions
  • Where the waste goes, with paperwork
  • If the price includes VAT
  • Which laboratory analyses samples

What to check before you book

Good to know

Here’s what Artex removal covers, and what it does not:

  • Other materials may need their own approach
  • We test before removal, because a clear result means ordinary methods can be used
  • Larger-scale steam or gel removal must be notified before it starts, which affects the start date

Not sure what you need? Send us photos and we will tell you honestly before booking.

Materials in Stanhope

  • Ceiling roses and cornices (coated)
  • Patched or painted coatings
  • Swirl and stipple patterns
  • Textured walls
  • Coated plasterboard
  • Artex ceilings

Service details

Artex in Stanhope homes

Stanhope is about 1 mile south-west of Ashford, in Kent. For Artex jobs in Stanhope, tell us about parking and access. Stanhope is one of 922 towns and villages in Kent where we work. Our nearest city page is Canterbury, about 14 miles away.

For rented flats close to Ashford International station, coatings can be tested while the flat is empty. Non-domestic buildings like Beaver Green Primary School should already have records of any textured coatings. Parts of the Kent Downs National Landscape are within about 6 miles of Stanhope; cottages and farmhouses nearby can have textured coatings too.

Here we cover the TN23 postcode area. That could mean a property on Green Lane, Cryol Road and Athol Road or the roads around them, wherever it is in Stanhope. Neighbouring places we cover include Ashford (1 mile north-east), Park Farm (1 mile south-east), Kingsnorth (1 mile south), Newtown (1 mile east) and Great Chart (1 mile north-west). Further out, we also cover Canterbury (14 miles north-east), Folkestone (14 miles east), Faversham (13 miles north), Hythe (11 miles south-east), Davington (13 miles north) and Preston (12 miles north).

Well-known places in the area include William Harvey Hospital (2.7 miles east) and Ashford Designer Outlet (1.1 miles east). Within reach you will find Orlestone Forest.

  • Local schools include John Wallis Academy (less than half a mile south)
  • Local pubs include The Beaver Inn (0.6 miles north-east)
Map of Stanhope © OpenStreetMap contributors

Prices and what affects them

Quotes vary because of:

  • Access: height, lofts, steps and space
  • The type of material and its condition
  • The quantity or area
  • Location, parking and any London charges

Very low prices can mean corners are being cut: controls, protective equipment, laboratory fees and legal disposal all cost money.

Photos that help

A few photos can save a site visit:

  • An overall view
  • Cracks or breaks
  • A clear close-up
  • Visible markings

Photos and a postcode help us quote quickly: fill in the enquiry form or give us a call on 07833 053 749.

  • Survey or test first when it isn’t clear what a material is
  • Planned to HSE guidance and the Control of Asbestos Regulations 2012
  • Paperwork for your records: reports, lab results and consignment notes
  • Waste sealed and labelled, then taken to a permitted site

How it works · Licensed or non-licensed? · Get a quote