A surveyor in a respirator putting a sample of loft material into a sealed bag

Buckinghamshire · England

Artex Removal for Wormstone

Looking for Artex removal in Wormstone? We work across Wormstone and the towns around it, with plain-English advice and a written quote.

  • Ceilings before skimming
  • Loft conversions
  • Coatings already disturbed

Request a quote Phone 07833 053 749

Artex removal near Wormstone

Your questions about Artex removal in Wormstone

Is the Artex in my Wormstone home asbestos?

Some older coatings do, and many do not. Testing a sample is the only way to know.

Do older homes in Wormstone have asbestos?

It depends on its age and history: asbestos was used until the 1999 ban, so older homes and older alterations in Wormstone can contain it. Common places include garage roofs, textured ceilings, floor tiles, soffits and flues.

Do I get anything in writing afterwards?

That depends on the job: a survey report, a laboratory result, or a consignment note for removed waste.

What does it cost to remove Artex?

It depends on the area, the method and the waste, so we quote after testing.

Is a home built after 2000 likely to contain asbestos?

Asbestos was banned in 1999, so buildings built after 2000 shouldn’t contain it, but older parts and reused materials can still contain it.

Is my textured ceiling in Wormstone asbestos?

Not necessarily: plenty of textured coatings contain no asbestos. A sample test tells you which you have.

Do you need a licence to remove Artex?

Normally not, according to HSE. Larger steam or gel jobs must be notified first.

Can I just skim over it?

You can, if it’s intact: covering it leaves it undisturbed. Never sand it beforehand, and record its location.

How artex removal works in Wormstone

Left undisturbed, an intact textured coating is low risk. The problem comes when it’s sanded, scraped dry, drilled or knocked through during a renovation, which is why testing first matters in Wormstone. Typical jobs include loft conversions and coatings damaged by leaks, involving Artex ceilings, coated plasterboard and swirl patterns.

In areas like Wormstone, textured ceilings appear in older and newer homes. We explain what we find in plain English, including when it’s better to leave a material in place.

Location
Wormstone (HP18)
County
Buckinghamshire
Service
Textured ceilings and walls
You receive
Test result and waste paperwork
Quote
A written quote before work starts
Call
07833 053 749
Page updated
26 October 2026
Workers in respirators bagging waste

DIY and asbestos

If you do find something during DIY, stop: leave the area, don’t clean it up, and ask for advice.

Power tools, sanding and jet-washing release the most fibres.

After the job

If other rooms have textured coatings, record whether they’ve been tested, for future work.

Going forward:

  • Book your plasterer after removal
  • Keep pets out of the work area
  • Test every different coating
  • File the test result and waste note

Avoid these

Never sand or dry-scrape Artex before testing.

Don’t drill or cut into textured ceilings until you know what they contain.

The scope of Artex removal

The usual limits are:

  • We test before removal, since a negative result changes everything
  • We leave the surface ready for your plasterer
  • The room being worked on has to be empty and sealed off

If in doubt, ask: we will recommend a test, a survey or removal.

Materials in Wormstone

  • Textured walls
  • Swirl and stipple patterns
  • Ceiling roses and cornices (coated)
  • Patched or painted coatings
  • Artex ceilings
  • Coated plasterboard

Read more about the service

Artex removal around Wormstone

Wormstone is about 3 miles west of Haydon Hill, in Buckinghamshire. For Artex jobs in Wormstone, tell us about parking and access. Wormstone is one of 263 places in Buckinghamshire where we work. Our nearest city page is Oxford, about 15 miles away.

For a school such as Waddesdon Church of England School, the duty holder’s records should show any coatings. If you’re refurbishing a rental near Aylesbury Vale Parkway station, coatings can be tested while the flat is empty.

We cover Artex jobs across HP18 and the streets around it. Your property could be on Warmstone Lane and Warmstone Close or the roads around them, wherever it is in Wormstone. For properties just outside Wormstone, we cover Waddesdon (1 mile north-west), Upper Winchendon (1 mile south), Westcott (2 miles west), Quainton (2 miles north) and Nether Winchendon (3 miles south-west). Larger places within reach include Aylesbury (4 miles east), Buckingham (11 miles north), Elmhurst (5 miles east), Southcourt (5 miles south-east), Princes Risborough (9 miles south-east) and Haydon Hill (3 miles east).

Nearby you will also find Dinton Castle (3.2 miles south) and St John's Hospital (3.1 miles south-east).

  • Nearby schools include Waddesdon Village Primary School (under half a mile north-west)
  • Local pubs include The Bakers Arms (less than half a mile north-west)
Map of Wormstone © OpenStreetMap contributors

Responsibilities for owners

Duty holders for workplaces and the shared parts of flats in Wormstone must manage asbestos under regulation 4 of the Control of Asbestos Regulations 2012. That means finding it, assessing it, recording it and planning how to manage it.

For managing agents and freeholders in Wormstone, the register for shared areas needs keeping current and sharing with trades.

What we deal with in Wormstone

People used Artex to cover cracks and uneven ceilings, and some contained a small amount of white asbestos (chrysotile) for strength.

You can’t tell by looking, but these are common reasons people contact us:

  • Ceilings before skimming
  • Loft conversions and extensions
  • Ceilings due for rewiring or new downlights
  • Landlord refurbishments

Older homes across Wormstone may have coatings added during past renovations.

Questions to ask before you book

  • Whether they’re insured for asbestos work
  • For licensed work, a valid HSE licence
  • What’s excluded, such as making good or a new roof
  • Whether VAT is included

Choosing an asbestos contractor

Step by step

If we’re taking the boards down instead, they’re removed whole where possible. On the day, we check the area and talk you through the plan first.

  1. Send photos of the textured surfaces
  2. We arrange testing
  3. We explain your options: leave, cover or remove
  4. We remove it safely if that’s what you choose
  5. We dispose of the waste legally

Preparing for the visit

  • Mention any damage before we arrive
  • Warn neighbours if needed
  • Don’t disturb the material before we get there

How to get a quote

Tell us about the material, its location and your plans. Send photos through our quote form, or phone 07833 053 749.

Get a quote

Related guides

Materials, one by one

Patched areas

Different areas may need separate samples.

Textured walls

Walls are treated like ceilings.

Your options compared

DIY removal products are sold for textured coatings, but if it contains asbestos, the job needs proper controls. Test first. Identifying asbestos early is cheaper than stopping work later, when everything has to stop.

What you get

  • We identify first and remove only what needs removing
  • Jobs planned to HSE guidance
  • Legal disposal, with paperwork
  • Samples analysed by an accredited laboratory

See our prices page and published price ranges.

  • Identify it first: we test or survey before planning removal
  • Done to the regulations: HSE guidance and CAR 2012
  • Paperwork for your records: reports, lab results and consignment notes
  • Waste sealed and labelled, then taken to a permitted site

How it works · Licensed or non-licensed? · Get a quote