A surveyor in a half-mask respirator holding a scraper and a sealed sample bag inside a house

Greater London · England

Asbestos Testing for Victoria

Found something that might be asbestos in Victoria? We provide sampling and lab analysis of suspect materials, explained in plain English.

  • One-off checks in rented property
  • Tiles found under carpet
  • Soffit boards

Get a quote Call 07833 053 749

Asbestos testing in Victoria

Prices and what affects them

Our quotes take into account:

  • The type of survey you need
  • Roof spaces and outbuildings in scope
  • How much sampling is needed
  • Location, parking and any London charges

Identifying asbestos early is cheaper than stopping work later, when the whole project can be held up.

Photos that help

To help us quote quickly, send:

  • An overall view
  • A close-up from a safe distance
  • Cracks or breaks
  • Approximate dimensions

Not sure what you need? Send photos through our quote form, or phone 07833 053 749 and describe the problem, and we’ll recommend the right option.

About our asbestos testing in Victoria

Landlords, homeowners and contractors in Victoria use testing before small jobs: ceilings, floors, garage roofs and soffits are typical. Common materials are panels behind heaters, soffit boards and floor tiles, and typical jobs are boards and panels before a kitchen or bathroom refit and Artex before downlights or rewiring.

In flats and conversions around Victoria, testing is often about one ceiling, one floor or a boiler cupboard before a refit, where a test is all that is needed. If you are unsure what you need, ask: we will tell you honestly whether it’s a test, a survey or removal.

Location
Victoria (SW1V, SW1P, SW1X)
Area hub
Greater London
Covers
Testing of suspect materials
Afterwards
Lab result in writing
Quote
Quoted individually, in writing
Telephone
07833 053 749
Updated
26 October 2026
A surveyor kneeling to sample a floor material

Choosing the right option

Air testing is different from sample testing. Clearance air testing after licensed removal must be carried out by an independent analyst accredited by UKAS. Every quote says whether VAT is included.

What you get

  • Inaccessible areas listed clearly
  • Samples analysed by an accredited laboratory
  • Homes, rented property and workplaces
  • Paperwork you can show your buyer, landlord or builder

Read how we quote or our cost guide.

How it works

We start by agreeing exactly what to sample, then take each sample with the area damped and the point sealed afterwards. Before anything starts, we confirm the areas and materials with you.

  1. Describe the material and send a photo
  2. We quote for the samples needed
  3. We take each sample with wetting and controls, and seal it
  4. The samples are analysed by an accredited laboratory
  5. You get the written result, and we explain what it means

Getting ready

  • Leave the suspect material alone until we arrive
  • Tell us about anything that’s already damaged
  • Clear belongings, but leave the material alone

Getting a price

Photos from a safe distance help: send them through our contact page.

Ask for a quote

Related guides

FAQs for Victoria

Do you work in Victoria despite London parking restrictions?

Yes, we work across London. Tell us about parking, permits and access so we can plan; all of Greater London is inside the ULEZ.

Do you cover Victoria and the area around London Victoria station?

Yes. London Victoria station is close to the centre of Victoria, and we cover the whole area.

Can you help with a shop or office?

Yes: shops, offices, industrial units and community buildings as well as homes. The duty holder should be able to share the asbestos register.

How quickly can you come out?

Dates are agreed once the quote is accepted. Some work has to be notified to the enforcing authority first, which affects timing.

How do I know if a material in Victoria contains asbestos?

Not reliably by eye: a sample has to be analysed in a laboratory. We take the sample safely and send it to an accredited lab.

What’s the difference between a test and a survey?

Testing tells you about particular materials; a survey looks at everything in scope, including things you hadn’t spotted.

How do I get a quote?

Fill in the enquiry form or give us a call on 07833 053 749. Include the postcode, a description and photos.

Is asbestos dangerous?

Breathing in asbestos fibres can cause serious diseases, often decades later. The risk comes mainly from disturbing materials that contain it, which is why identifying it first matters.

Why people call us in Victoria

The risk generally comes from drilling or sanding something nobody had tested. Testing first avoids that.

Get advice if you’re dealing with any of these:

  • A material damaged during DIY
  • Soffit boards
  • Garage roofs before replacement
  • Artex before downlights or rewiring

At a school like St Peter's Eaton Square CofE Primary School, the duty holder keeps asbestos records, which staff and parents can ask about.

Questions to ask before you book

  • How many samples are included
  • If the price includes VAT
  • The scope of the job, in writing
  • Which areas are covered, and which aren’t

Read the checklist

Afterwards

You get a written laboratory result for each sample, stating whether asbestos was detected and what type.

Looking after any asbestos that remains:

  • Group several materials into one visit
  • Leave the material undisturbed until we have sampled it
  • Make the area easy to reach
  • If tiles and adhesive are both exposed, mention it

What to avoid

Leave the material alone until the result is back.

Until you have the result, don’t drill, sand, scrape or cut the material.

DIY and asbestos

Working on a fragile asbestos cement roof is dangerous in itself, as well as an asbestos risk, so never climb onto one.

DIY sampling means disturbing the material yourself. HSE advises that samples are best taken by a competent person.

Materials, one by one

Roof felt and mastics

Some bitumen products contain asbestos.

Boards and panels

If it’s insulating board, most work on it is licensed, so the result matters.

Testing around Victoria

Victoria is about 1 mile south of City of Westminster, in Greater London. Homes, landlords and businesses in Victoria contact us for tests about all kinds of jobs. We work in 764 places across Greater London.

For rented homes around London Victoria station, testing before work avoids delays. For an older property in Victoria, whether near St. Michael's Church or not, it’s worth testing suspect materials before work.

Wherever your property is in SW1V, SW1P and SW1X, asbestos testing is available, from busy streets to quiet lanes. Whether your property is on Eaton Lane, Gerald Road and Wilton Road or a nearby road, the process is the same. Victoria sits on or near the A202 and A302; tell us about parking if you are on a main road. We also carry out tests in Belgravia (1 mile north-west), Pimlico (1 mile south-east), Westminster (1 mile north-east), Millbank (1 mile north-east) and Brompton (1 mile west). Further out, we also cover Shoreditch (4 miles north-east), Walthamstow (8 miles north-east), Hoxton (4 miles north-east), Whitechapel (4 miles north-east), Hampstead (4 miles north) and Ruislip (13 miles north-west).

Victoria is in London, inside the Ultra Low Emission Zone, where parking and loading can be restricted: let us know about parking and access when you get in touch.

Nearby you’ll also find Baynard's Castle (2.2 miles north-east) and Health Exhibition Centre (under half a mile south-west). Green spaces nearby include Ludgate Hill and St. James's Park Lake.

  • Nearby schools include Westminster Cathedral Choir School (less than half a mile east) and Westminster City School (within half a mile north-east)
  • Local pubs include Wetherspoons pub (within half a mile east)
  • Parks and local facilities nearby include Westminster St Margaret and St John (0.6 miles north-east) and London Library (0.9 miles north)
Map of Victoria © OpenStreetMap contributors

Responsibilities for owners

Before contractors start, they need to know about any asbestos. HSE’s campaigns stress this point to building owners and trades alike.

If you are responsible for a non-domestic building or the common parts of flats in Victoria, you have a duty to manage asbestos under the Control of Asbestos Regulations 2012. In practice: find it, assess it, record it and manage it.

  • Survey or test first when it isn’t clear what a material is
  • Work planned to the Control of Asbestos Regulations 2012 and HSE guidance
  • Everything in writing: quotes, reports, results and waste notes
  • Asbestos waste double-bagged or wrapped and taken to a permitted site

How it works · Licensed or non-licensed? · Get a quote