Hampshire · England

Asbestos removal and surveys in RG25

We work across all of the RG25 postcode district, including Overton, Quidhampton and North Waltham. Surveys, testing and removal, planned to HSE guidance.

Need asbestos advice in RG25?

About artex removal in RG25

Planning a renovation in RG25 with textured ceilings? Test them before rewiring, fitting downlights or plastering. Typical materials include stipple finishes, Artex ceilings and swirl patterns, and typical jobs are ceilings coming down and rented flats before redecoration.

We finish by cleaning the room thoroughly.

  1. Get in touch with photos
  2. We test a sample of each coating
  3. We explain your options: leave, cover or remove
  4. We carry out the removal
  5. The waste goes to a permitted site with a consignment note

Pricing in RG25

A price that looks too good to be true often is: proper controls, lab analysis and legal waste disposal cost money.

What you get

  • Legal disposal, with paperwork
  • Samples analysed by an accredited laboratory
  • Work planned to HSE guidance and the regulations
  • Paperwork you can show your buyer, landlord or builder

Ask for a quote

Include any existing survey or test when you ring 07833 053 749, or send the details through our contact page.

What’s near Overton

In Overton, that can mean a property near Church of St Mary, Overton Church of England Primary School and The Greyhound pub, among other places. The closest station to Overton is Overton station, roughly 0.8 miles north of the centre.

Where we remove Artex in RG25

In RG25, renovation is when textured ceilings get noticed, in Overton, Viables and Hatch Warren and smaller places alike.

Overton: Older homes across Overton may have coatings added during past renovations. If you’re refurbishing flats near Overton station, a void period is a good time to deal with textured ceilings.

What we do and do not cover

Before booking, note that:

  • The room being worked on has to be empty and sealed off
  • Plastering and making good are generally separate jobs
  • Big jobs need notifying in advance, so allow time

Looking after things afterwards

If you’ve covered a coating rather than removed it, record where it is.

  • Keep the results and paperwork
  • Send photos of the coatings
  • Clear the rooms before the work
  • Keep pets out of the work area

Don’t sand, scrape dry or wire-brush a textured coating before it’s been tested.

Hold off on drilling until you have a result.

DIY and asbestos

HSE’s advice to the public is not to try to repair or remove asbestos yourself. Higher-risk materials such as lagging, sprayed coatings and most insulating board must only be dealt with by an HSE-licensed contractor.

Asbestos waste can’t go in household bins, recycling or skips. It must go to a permitted site; check with your council about small amounts.

Typical Artex jobs in RG25

Most problems come during renovation: sanding to smooth a ceiling, scraping it off dry or drilling for lights.

Get advice if you’re dealing with any of these:

  • Ceilings due for plastering or skimming
  • Walls before a kitchen or bathroom refit
  • Loft conversions and extensions
  • Rented homes refurbished between tenants

What affects the price in RG25

The biggest factors in the price are:

  • The number of samples or the size of the building
  • Material and condition
  • How much waste there is
  • Access to the area

What you pay depends on the job itself: the materials, the amount, access and what paperwork is needed. We quote each job individually.

Helping us quote

A few photos can save a site visit:

  • Labels, if any
  • The parking area
  • Cracks or breaks
  • A clear close-up

Tell us about the material, its location and your plans. Use our quote form or call 07833 053 749.

Common questions in RG25

Can I put asbestos in a skip?

Never: it’s hazardous waste. We take it to a permitted site with paperwork.

Do you need a licence to remove Artex?

Normally not: HSE treats textured coating work as normally non-licensed, but larger-scale steam or gel removal must be notified first.

Which asbestos work needs a licence?

Licensed work is work on the materials most likely to release fibres: lagging, sprayed coatings and most asbestos insulating board. It needs a contractor with an HSE licence.

Is it better to remove the coating or the ceiling?

Either can work: it depends on the room and the condition of the ceiling. We’ll advise room by room.

What if the weather’s bad?

Indoor work is not affected. Outdoor roof work can be delayed by strong wind or heavy rain.

Is it OK to scrape off Artex?

Not before testing. Sanding or dry scraping an asbestos coating releases fibres.

What if asbestos is found during building work?

Stop work in that area and keep people out, and the material needs identifying before work resumes.

  • Identify it first: we test or survey before planning removal
  • Planned to HSE guidance and the Control of Asbestos Regulations 2012
  • Written paperwork: reports, results and waste consignment notes
  • Asbestos waste double-bagged or wrapped and taken to a permitted site

How it works · Licensed or non-licensed? · Get a quote