Oxfordshire · England
Asbestos Artex Removal in Albury, Oxfordshire
Need Artex removal in Albury? We cover Albury and the surrounding area, with plain-English advice and a written quote.
- Coatings damaged by DIY
- Ceilings before skimming
- Textured walls before a refit
Artex removal in Albury
Artex removal near Albury
If your renovation in Albury involves textured ceilings, test them before rewiring, fitting downlights or plastering. From coatings scraped during DIY and loft conversions, we cover coated ceiling roses, stipple finishes and coated plasterboard and more.
In a village like Albury, textured coatings turn up in cottages and later homes alike, often added during past renovations. You get written paperwork for every job: a report, laboratory results or a waste consignment note, so you have a record.
- Where
- Albury (OX9)
- Area hub
- Oxfordshire
- Covers
- Testing and removal of textured coatings
- Afterwards
- Lab result and consignment note
- Quote
- A written quote before work starts
- Call
- 07833 053 749
- Page updated
- 26 October 2026
Should you do it yourself?
Sanding, drilling, cutting and jet-washing are the worst things you can do to asbestos materials.
Found something mid-DIY? Stop: keep people away, don’t sweep or vacuum it up, and get advice.
For landlords, agents and businesses
Community buildings count as non-domestic premises, so the duty to manage applies.
Contractors working for you need asbestos information before they start. HSE regularly reminds owners and trades of it.
Weighing up your options
Strip the coating or take the boards down? Stripping keeps the ceiling; taking boards down whole can be quicker and cleaner in some rooms. Access makes a big difference to cost, so photos of the area and the way in help us quote accurately.
Why us?
- Across London and the South East
- Domestic and commercial work
- No removal until we know what it is
- Legal disposal, with paperwork
Read how we price jobs or the cost guide.
How we work
If we’re taking the boards down instead, they’re removed whole where possible and bagged or wrapped. Before anything starts, we confirm the areas and materials with you, so there’s no confusion.
- Let us know which rooms have textured coatings
- We sample each different coating for testing
- We go through the options and send a quote
- The room is sealed, and the coating removed wet or the boards taken down
- We clean up and send the waste paperwork
Preparing for the visit
- Move things out of the way carefully
- Tell neighbours if the work is close to their property
- Make sure we can get to the area
How to get a quote
Include any existing survey or test when you send photos through our quote form, or phone 07833 053 749.
Read more
After we have finished in Albury
If you’ve covered a coating rather than removed it, record where it is.
Some practical advice:
- Send photos of the coatings
- File the test result and waste note
- Tell us which rooms and roughly how big they are
- Plan where you will stay or work while rooms are closed off
Avoid these
Hold off on drilling until you have a result.
Don’t drill or cut into textured ceilings until you know what they contain.
Textured ceilings in Albury
Albury is about 4 miles west of Thame, in Oxfordshire. We work across Albury and the surrounding area, from older terraces and semis to flats, workplaces and outbuildings. Albury is one of 443 places in Oxfordshire we cover. Our area stretches from Albury to Oxford (about 8 miles away).
Anywhere in OX9, we can help with Artex removal. Streets in the area include Oxford Road, Ickford Road and Albury View, and Artex removal is available on all of them. Neighbouring places we cover include Tiddington (1 mile west), Draycott (1 mile north-west), Milton Common (1 mile south), Little Ickford (1 mile north) and Shabbington (1 mile north-east). Within a short drive, we also work in Oxford (8 miles west), Didcot (12 miles south-west), Bicester (12 miles north), Abingdon-on-Thames (11 miles south-west), Thame (4 miles east) and Kidlington (11 miles north-west).
A little further out are Waterperry Gardens Rural Museum (1.7 miles north-west) and Thame Community Hospital (3.6 miles east). Green spaces nearby include Wells Farm.
- Local pubs include The Fox Inn (within half a mile west)
Places near Albury
Other services in Albury
A closer look at the materials
Ceiling roses and cornices
We sample them if needed.
Artex ceilings
A small sample from each different coating tells you whether it contains asbestos.
Typical Artex jobs in Albury
Leaks and DIY can damage coatings, so they may start to flake.
These come up again and again:
- Coatings damaged by DIY
- Damaged or cracked coatings
- Walls before tiling
- Rented homes refurbished between tenants
If your home is one of the older properties in Albury, near Church of St Helen or elsewhere, textured ceilings may date from an earlier renovation.
Comparing quotes
- That samples are analysed by an accredited laboratory
- Whether the work is licensed, notifiable non-licensed or non-licensed
- Waste disposal and the consignment note
- Insurance appropriate to asbestos work
Your questions about Artex removal in Albury
Could my house in Albury contain asbestos?
Older homes can, if they date from before 2000. A sample test is the only reliable answer. Garage roofs, Artex, floor tiles, soffits and flues are typical examples.
Do you cover small places like Albury?
Yes. We cover villages and hamlets as well as towns. Tell us about access and parking.
Can I put asbestos in a skip?
No. Asbestos is hazardous waste and must go to a site that accepts it. When we remove it, it’s taken to a permitted site with a consignment note.
Does someone need to be there?
We need access to every area involved in the job, and it helps if you are around to answer questions.
What paperwork will I get?
Depending on the job, a report, results or a consignment note.
Do you work on commercial premises?
Yes. Send us the details of the premises.
Does all Artex contain asbestos?
Not necessarily: many coatings are asbestos-free. Testing a sample is how you find out.
Can I just skim over it?
You can, if it’s intact: skimming or boarding over avoids disturbing it. Never sand it beforehand, and record its location.
Good to know
What’s in and what’s out:
- We leave the surface ready for your plasterer
- Big jobs need notifying in advance, so allow time
- Other materials may need their own approach
If in doubt, ask: we will recommend a test, a survey or removal.
What we deal with
- Ceiling roses and cornices (coated)
- Coated plasterboard
- Textured walls
- Patched or painted coatings
- Swirl and stipple patterns
- Artex ceilings
- Nothing removed blind: unknown materials are tested first
- Work planned to the Control of Asbestos Regulations 2012 and HSE guidance
- Everything in writing: quotes, reports, results and waste notes
- Waste sealed and labelled, then taken to a permitted site