Greater London · England
Asbestos Artex Removal in Belmont, Greater London
Artex removal for properties in Belmont and Greater London: testing and removal of Artex and textured coatings.
- Textured walls before a refit
- Coatings scraped during DIY
- Ceilings before plastering
Artex removal near Belmont
Artex removal in Belmont
Removing an asbestos textured coating means sealing off the room, keeping the coating wet and never sanding or scraping it dry, with the waste bagged and taken to a permitted site. Typical jobs include coatings scraped during DIY and extensions that cut into ceilings, including stipple finishes, coated plasterboard and coated ceiling roses.
Textured ceilings are a common find in renovations in places like Belmont, often painted over many times. Every quote is in writing and spells out what’s covered, so you know where you stand.
- Area
- Belmont (HA3, HA7)
- Area hub
- Greater London
- Covers
- Artex tested, then removed with wet methods
- Afterwards
- Test result and waste paperwork
- Price
- A written quote before work starts
- Call
- 07833 053 749
- Updated
- 26 October 2026
Should you do it yourself?
Asbestos waste cannot go in household bins, recycling or skips. It must go to a permitted site; check with your council about small amounts.
HSE advises the public not to repair or remove asbestos themselves. Higher-risk materials such as lagging, sprayed coatings and most insulating board must only be dealt with by an HSE-licensed contractor.
Common questions in Belmont
Do you work in Belmont despite London parking restrictions?
We do. Let us know the parking situation and we’ll plan around it.
Do you work near Harrow & Wealdstone station?
Yes, we cover Belmont and the area towards Harrow & Wealdstone station, about 0.9 miles south-west.
Do I need a test or a survey?
Testing covers particular materials, while a survey covers everything in scope. Before building work, you normally need a survey.
How much does Artex removal cost in Belmont?
It depends on the area, the number of rooms, the method and the waste. We quote after testing.
What does licensed work mean?
Licensed work is work on the materials most likely to release fibres: lagging, sprayed coatings and most asbestos insulating board. It needs a contractor with an HSE licence.
Do you work for landlords and businesses?
Yes: homeowners, landlords, managing agents, businesses and contractors. Send the details.
Is my textured ceiling in Belmont asbestos?
Not every coating does: plenty of textured coatings contain no asbestos. Testing a sample is how you find out.
What if the weather’s bad?
It depends on the job: indoor jobs are not affected, but outdoor removal may be rescheduled for safety.
Also near Belmont
What else we do in Belmont
What we deal with in Belmont
Coatings get damaged by water leaks, cracks and DIY, which can make them crumble.
Typical jobs in Belmont include:
- Ceilings due for rewiring or new downlights
- Flaking textured ceilings
- Rented homes refurbished between tenants
- Ceilings coming down
If your home is one of the older properties in Belmont, near Church of St Anselm or elsewhere, textured ceilings may date from an earlier renovation.
Before booking anyone
- That licensed work will be done by an HSE-licensed contractor
- What’s excluded, such as making good or a new roof
- That samples are analysed by an accredited laboratory
- How the work will be done, and the controls used
After we have finished in Belmont
Tell your plasterer and electrician what was done.
If asbestos stays in the building:
- Give us room sizes
- File the test result and waste note
- Photos help us quote
- Each different coating needs testing
Don’ts
Do not use a steamer or chemical stripper on an untested coating.
Don’t try DIY removal products on untested coatings.
A closer look at the materials
Coated plasterboard
Coatings are applied over plasterboard or plaster. Removing the boards can be an option.
Patched areas
Patch repairs may use a different material from the original coating.
Limits to be aware of
To be clear about the scope:
- Other asbestos materials found in the room are dealt with separately
- Larger-scale steam or gel removal must be notified before it starts, so allow time
- The room being worked on has to be empty and sealed off
Not sure what you need? Send us photos and we’ll tell you honestly before booking.
Materials we see
- Swirl and stipple patterns
- Artex ceilings
- Coated plasterboard
- Patched or painted coatings
- Textured walls
- Ceiling roses and cornices (coated)
For landlords, agents and businesses
For managing agents and freeholders in Belmont, the asbestos register for common parts should be kept up to date and shared with contractors, and condition checked regularly.
If you are responsible for a non-domestic building or the common parts of flats in Belmont, you have a duty to manage asbestos under regulation 4 of the Control of Asbestos Regulations 2012. In practice: find it, assess it, record it and manage it.
Artex removal around Belmont
Belmont is about 1 mile south-west of Stanmore, in Greater London. Belmont has a mix of older and newer buildings, and anything from before 2000 may contain asbestos. We cover 764 places in Greater London, from the larger towns to small villages. Our nearest city page is London, about 12 miles away.
For rented flats close to Harrow & Wealdstone station, coatings can be tested while the flat is empty. Non-domestic buildings like St Joseph's Catholic Primary School should already have records of any textured coatings.
Anywhere in HA3 and HA7, we can help with Artex removal. From The Avenue, Locket Road and Church Lane or anywhere nearby, we can help. Neighbouring places we cover include Harrow Weald (1 mile west), Stanmore (1 mile north-east), Headstone (2 miles west), Brockley Hill (2 miles north-east) and Hatch End (2 miles west). Within a short drive, we also work in London (12 miles south-east), City of Westminster (9 miles south-east), Marylebone (9 miles south-east), Kensington (9 miles south-east), St Pancras (10 miles south-east) and Shoreditch (12 miles south-east).
Belmont is in London, inside the Ultra Low Emission Zone, where parking and loading can be restricted: let us know about parking and access when you get in touch.
Nearby you’ll also find Hilfield Castle (3.7 miles north) and St. Anns (1.6 miles south-west). Green spaces nearby include Northala Fields and Stanmore Country Park.
- Local schools include Park High School (0.7 miles east) and Whitchurch Junior School (0.8 miles north-east)
- Pubs nearby include The Duck in the Pond pub (under half a mile north-west)
How we work
On the day, we seal off the room and protect floors and fittings, and keep the coating damp as we work. On the day, we check the area and talk you through the plan first.
- Send photos of the textured surfaces
- We test a sample of each coating
- We talk through the options
- We remove it safely if that’s what you choose
- The waste goes to a permitted site with a consignment note
Before we arrive
- Tell us about anything that’s already damaged
- Tell us about parking and access
- Move belongings away from the area, without touching the material
Getting a price
Unsure whether you need a test, a survey or removal? Use our quote form or call 07833 053 749, and we will recommend the right option.
Helpful guides
How we price Artex removal
Our quotes take into account:
- Material and condition
- Travel and parking
- How much waste there is
- The number of samples or the size of the building
How easy the material is to reach affects the price, so tell us about access.
Sending photos
Photo tips:
- A close-up from a safe distance
- Any damage, cracks or broken pieces
- An overall view
- An idea of size
Every job is quoted in writing. Call 07833 053 749 or use our quote form with the details.
- Nothing removed blind: unknown materials are tested first
- Done to the regulations: HSE guidance and CAR 2012
- Everything in writing: quotes, reports, results and waste notes
- Legal disposal at a permitted site, with a consignment note