A surveyor in a respirator putting a sample of loft material into a sealed bag

Kent · England

Asbestos Artex Removal in Bicknor, Kent

Looking for Artex removal in Bicknor? We cover Bicknor and the surrounding area, with clear advice and a written quote.

  • Coatings damaged by DIY
  • Ceilings coming down
  • Loft conversions

Ask for a quote Ring 07833 053 749

Artex removal near Bicknor

How we work

Our team wears protective equipment, and the room stays closed. Before anything starts, we confirm the areas and materials with you.

  1. Describe the coatings and rooms
  2. We sample each coating
  3. We plan the removal and send a quote
  4. The coating is removed with controls
  5. We clean up and send the waste paperwork

Preparing for the visit

  • Keep away from the material in the meantime
  • Tell neighbours if the work is close to their property
  • Clear access to the area, loft or garage

Artex removal in Bicknor

Sometimes it’s simpler to take the ceiling boards down whole than to strip the coating. We’ll explain which suits your rooms. We often deal with stipple finishes, swirl patterns and textured walls, and typical jobs are rented flats before redecoration and ceilings before downlights go in.

In areas like Bicknor, textured ceilings appear in older and newer homes, often added during past renovations. Every quote is in writing and spells out what’s covered, so there are no surprises.

A sealed sample bag held up by a surveyor
Area
Bicknor (ME9)
Region
Kent
What we do
Artex tested, then removed with wet methods
You receive
Test result and waste paperwork
Price
A written quote before work starts
Call
07833 053 749
Updated
26 October 2026

Questions from Bicknor

Is asbestos common in Bicknor homes?

It depends on its age and history: asbestos products were used until 1999, so pre-2000 homes and extensions in Bicknor may have it. Look at garage roofs, textured ceilings, old floor tiles, soffits and flues.

Do textured ceilings in Bicknor homes contain asbestos?

Some may, but many coatings do not contain asbestos. Only a test will tell you.

Do you cover Bicknor?

Yes, Bicknor is in our area. Tell us the postcode and what you need.

Is asbestos dangerous?

It can be, if fibres are released and breathed in. Diseases linked to it, such as mesothelioma and asbestosis, can appear many years later, which is why it’s identified before work.

What’s the difference between a test and a survey?

Testing tells you about particular materials; a survey looks at everything in scope, including things you hadn’t spotted.

Is it OK to scrape off Artex?

Not before testing. Sanding or dry scraping an asbestos coating releases fibres.

Will I get the price in writing?

Yes, always, including whether VAT is included.

Can you quote from photos?

Many jobs can be quoted from photos, though some need a visit first.

Bicknor properties and textured coatings

Bicknor is about 4 miles south-west of Sittingbourne, in Kent. Properties in Bicknor range from older houses to newer estates and commercial buildings, and anything built or refurbished before 2000 can contain asbestos. We cover all 922 towns and villages in Kent, from the larger towns to small villages. You can also see our page for Canterbury, about 18 miles away.

Older homes across Bicknor may have coatings added during past renovations. Bicknor is within about 3 miles of the Kent Downs National Landscape, and older rural homes there often have textured ceilings from past renovations.

Here we cover the ME9 postcode area, and your Artex job can be anywhere in it. Neighbouring places we cover include Hucking (1 mile west), Wormshill (1 mile south-east), Broad Street (2 miles south-west), Hollingbourne (2 miles south-west) and Eyhorne Street (3 miles south-west). We also cover nearby towns such as Maidstone (6 miles west), Ashford (14 miles south-east), Sittingbourne (4 miles north-east), Faversham (9 miles east), Minster (10 miles north-east) and Kings Hill (12 miles west).

Well-known places in the area include Leeds Castle (3.7 miles south-west) and KIMS hospital (4.9 miles west). Green spaces nearby include Detling Hill.

Map of Bicknor © OpenStreetMap contributors

Choosing the right option

Skimming over Artex is an option, but never sand it first, and it remains in place. Grouping jobs together can keep costs down, such as testing several materials at once.

How we work in Bicknor

  • Samples analysed by an accredited laboratory
  • Across London and the South East
  • Homes, rented property and workplaces
  • Waste taken to a permitted site with a consignment note

See how we quote or published price ranges.

After the job

If other rooms have textured coatings, record whether they’ve been tested, for future work.

Some practical advice:

  • Plan where you’ll stay or work while rooms are closed off
  • Each different coating needs testing
  • Send photos of the coatings
  • Keep pets out of the work area

Things not to do

Never sand or dry-scrape Artex before testing.

Don’t drill or cut into textured ceilings until you know what they contain.

Doing it yourself?

HSE’s advice to the public is not to try to repair or remove asbestos yourself. Higher-risk materials such as lagging, sprayed coatings and most insulating board must only be dealt with by an HSE-licensed contractor.

A professional job comes with paperwork: a record that buyers, insurers and builders may want to see.

What we do and don’t cover

Worth knowing before booking:

  • Other asbestos materials found in the room are dealt with separately
  • We need the room cleared
  • Untested coatings are tested first, because a clear result means ordinary methods can be used

Not sure what you need? Send us photos and we will tell you honestly before you book.

Materials we see

  • Ceiling roses and cornices (coated)
  • Artex ceilings
  • Patched or painted coatings
  • Coated plasterboard
  • Swirl and stipple patterns
  • Textured walls

Service details

For businesses and landlords in Bicknor

If you manage or own a block in Bicknor, the register for shared areas needs keeping current and sharing with trades.

Contractors working for you need asbestos information before they start. HSE regularly reminds owners and trades of it.

What affects the price in Bicknor

The biggest factors in the price are:

  • Disposal costs
  • The number of samples or the size of the building
  • Material and condition
  • Parking and access charges

Identifying asbestos early is cheaper than stopping work later, when everything has to stop.

Sending photos

The most useful photos are:

  • A picture of the whole area
  • Labels, if any
  • Any damage, cracks or broken pieces
  • A close-up from a safe distance

Photos taken from a safe distance are fine: send them through our contact page.

Common reasons for Artex jobs in Bicknor

Many ceilings have years of paint on them, which can make them look newer than they are.

If any of these sound familiar, it’s worth getting advice:

  • Rented homes refurbished between tenants
  • Damaged or cracked coatings
  • Textured walls before a refit
  • Coatings scraped during DIY

If you are refurbishing a rental near Hollingbourne station, textured ceilings can be tested between tenancies.

Comparing quotes

  • For licensed work, a valid HSE licence
  • What paperwork you get
  • Which laboratory analyses samples
  • How the waste will be disposed of, and whether you will get a consignment note

Read the checklist

  • Identify it first: we test or survey before planning removal
  • Done to the regulations: HSE guidance and CAR 2012
  • Written paperwork: reports, results and waste consignment notes
  • Waste sealed and labelled, then taken to a permitted site

How it works · Licensed or non-licensed? · Get a quote