A surveyor in a respirator putting a sample of loft material into a sealed bag

Kent · England

Artex Removal in Hucking

Artex removal in Hucking: Artex removal, with testing first. Tell us what you’ve found and we will explain your options.

  • Coatings already disturbed
  • Flaking textured ceilings
  • Ceilings due for rewiring or new downlights

Ask for a quote Phone 07833 053 749

Need Artex removal in Hucking?

How we work

The coating is softened with water, steam or gel and removed with hand tools, never sanded or scraped dry. The work area is kept clear while we’re working.

  1. Get in touch with photos
  2. We test a sample of each coating
  3. We talk through the options
  4. We carry out the removal
  5. The waste goes to a permitted site with a consignment note

Preparing for the visit

  • Ensure we can get to the area
  • Tell us about parking and access
  • Let neighbours know if the work is near them

How to get a quote

Send us the address in Hucking, a description and some photos: send photos through our quote form, or phone 07833 053 749, and we’ll reply with a quote.

Ask for a quote

Related guides

Artex removal for Hucking properties

Sometimes it’s simpler to take the ceiling boards down whole than to strip the coating. We’ll talk you through the options for your rooms in Hucking. Whether it’s ceilings before downlights go in and ceilings before skimming, we cover swirl patterns, coated plasterboard and stipple finishes.

Rural homes near Hucking have often been altered over generations, so coatings may date from earlier work. Not sure what you need? Just ask: we will recommend a test, a survey or removal, whichever fits.

Location
Hucking (ME17)
County
Kent
Service
Testing and removal of textured coatings
Afterwards
Result and waste note
Quote
Written quote for your job
Call
07833 053 749
Page updated
26 October 2026
Three workers in coveralls, full-face respirators and gloves lowering a cracked cement sheet into a heavy-duty waste bag behind barrier tape

Textured ceilings in Hucking

Hucking is about 5 miles south-west of Sittingbourne, in Kent. Anywhere in Hucking, just send the postcode. Hucking is one of 922 towns and villages in Kent we cover. We work right across the region, from Hucking to Canterbury (about 19 miles away).

If your home is one of the older properties in Hucking, near Church of St Margaret or elsewhere, textured ceilings may date from an earlier renovation. Hucking is within about 3 miles of the Kent Downs National Landscape, and older rural homes there often have textured ceilings from past renovations.

Artex jobs anywhere in ME17 start with the postcode and some photos. Neighbouring places we cover include Bicknor (1 mile east), Broad Street (1 mile south-west), Hollingbourne (2 miles south), Wormshill (2 miles east) and Eyhorne Street (2 miles south). Further out, we also cover Maidstone (5 miles west), Ashford (14 miles south-east), Sittingbourne (5 miles north-east), Gravesend (15 miles north-west), Faversham (11 miles east) and Minster (11 miles north-east).

Other landmarks nearby include KIMS hospital (3.8 miles west) and Leeds Castle (3.2 miles south). The countryside around Hucking includes Detling Hill.

  • Nearby, you will find Hook and Hatchet pub (less than half a mile west)
Map of Hucking © OpenStreetMap contributors

Questions from Hucking

Do you work near Hollingbourne station?

Yes, we cover Hucking and the area towards Hollingbourne station, about 2.1 miles south.

Do you come out to small villages like Hucking?

We do: small villages are covered too. Tell us about access and parking.

My builder has found asbestos. What now?

Work there should pause and the area be kept clear. We’ll identify it and advise on removal.

Can I plaster over Artex that contains asbestos?

It’s an option for an intact coating: covering it leaves it undisturbed. Do not sand it first, and keep a record that it’s there.

Do you need a licence to remove Artex?

Usually not: HSE’s code of practice says textured coating work is not normally licensable, but larger-scale steam or gel removal must be notified first.

Should I check for asbestos before buying?

Yes. A pre-purchase survey, arranged with the seller’s permission, shows what asbestos is there before you exchange.

How much does Artex removal cost in Hucking?

Room sizes, the method and the waste decide, so we quote after testing.

Can you help with a flat?

Yes, of course. For shared areas, ask the managing agent about the asbestos register.

Materials we deal with

Coated plasterboard

Coatings are applied over plasterboard or plaster. Removing the boards can be an option.

Painted coatings

The sample includes the coating itself.

Options to consider in Hucking

Test, leave, cover or remove? If it’s intact and no work will go through it, leaving or covering can make sense; for smooth ceilings or work through the ceiling, removal is typically best. Dealing with asbestos before building work is normally cheaper than finding it mid-job, when the whole project can be held up.

Why choose us

  • Records for your files
  • Waste paperwork for every removal
  • Identify first, remove only when needed
  • Written quotes that say what’s included

Take a look at how we quote or published price ranges.

How we price Artex removal

Our quotes take into account:

  • Travel and parking
  • How easy it is to reach
  • The number of samples or the size of the building
  • Waste quantity and disposal

Doing several things in one visit can help, for example testing several materials, or removing a garage roof and a flue at the same time.

Photos that help

A few photos can save a site visit:

  • Labels, if any
  • An overall view
  • The access route
  • The parking area

Not sure what you need? Call 07833 053 749 or use our quote form and describe the problem, and we’ll advise.

Common reasons for Artex jobs in Hucking

Older coatings are often painted over many times, which can make them look newer than they are.

Buildings from before 2000 can hide asbestos in many places. Typical situations are:

  • Rented flats before redecoration
  • Flaking textured ceilings
  • Coatings scraped during DIY
  • Ceilings due for plastering or skimming

For rented flats close to Hollingbourne station, a void period is a good time to deal with textured ceilings.

Before you book anyone

  • The documents you’ll receive
  • What exactly is included: the areas, materials or samples
  • Insurance appropriate to asbestos work
  • How the waste will be disposed of, and whether you will get a consignment note

What to check before booking

For landlords, agents and businesses

Before maintenance in a rented home, agents may ask about asbestos. A test or a survey gives everyone a clear answer.

Landlords of garage blocks and outbuildings should know what the roofs are made of, before anyone carries out repairs.

What happens next

If you’ve covered a coating rather than removed it, record where it is.

Once we’re done:

  • Test every different coating
  • Photos help us quote
  • Plan where you’ll stay or work while rooms are closed off
  • Give us room sizes

What to avoid

Do not sand, scrape dry or wire-brush a textured coating before it’s been tested.

Hold off on drilling until you have a result.

Can I do it myself?

DIY sampling means disturbing the material yourself. HSE advises that samples are best taken by a competent person.

A professional job comes with paperwork: a record that buyers, insurers and builders may want to see.

  • Identify it first: we test or survey before planning removal
  • Work planned to the Control of Asbestos Regulations 2012 and HSE guidance
  • Everything in writing: quotes, reports, results and waste notes
  • Waste sealed and labelled, then taken to a permitted site

How it works · Licensed or non-licensed? · Get a quote