East Sussex · England
Asbestos Artex Removal in Birling Gap, East Sussex
Worried about asbestos in Birling Gap? We provide Artex removal, with testing first, explained in plain English.
- Damaged or cracked coatings
- Ceilings before plastering
- Walls before a kitchen or bathroom refit
Need Artex removal in Birling Gap?
Artex removal in Birling Gap
Left undisturbed, an intact textured coating is low risk. The problem comes when it’s sanded, scraped dry, drilled or knocked through during a renovation. Typical jobs include coatings scraped during DIY and walls before tiling, involving coated ceiling roses, textured walls and swirl patterns.
In towns and villages like Birling Gap, textured ceilings appear in older and newer homes, often added during past renovations. Every quote is in writing and spells out what’s covered, so there are no surprises.
- Where
- Birling Gap (BN20)
- Area hub
- East Sussex
- Service
- Testing and removal of textured coatings
- Afterwards
- Test result and waste paperwork
- Quotes
- Quoted individually, in writing
- Call
- 07833 053 749
- Page updated
- 26 October 2026
Where asbestos turns up
People used Artex to cover cracks and uneven ceilings, and some included a little chrysotile.
People typically contact us about one of these:
- Loft conversions
- Rented flats before redecoration
- Ceilings before skimming
- Coatings already disturbed
If you are refurbishing flats near Eastbourne station, a void period is a good time to deal with textured ceilings.
What to look for in a quote
- What’s excluded, such as making good or a new roof
- Proof of an HSE licence where it’s needed
- Which laboratory analyses samples
- How the work will be done, and the controls used
Can I do it myself?
Sanding, drilling, cutting and jet-washing are the worst things you can do to asbestos materials, so avoid them completely.
Home testing kits exist, but you have to disturb the material to use one. HSE advises that samples are best taken by a competent person.
Duty holders and landlords in Birling Gap
For managing agents and freeholders in Birling Gap, the asbestos register for common parts should be kept up to date and shared with contractors, and condition checked regularly.
The duty to manage applies to non-domestic premises and common parts, not to single private homes, but anyone working on the property still needs to know about asbestos.
More for properties in Birling Gap
The process
At the end, the room is cleaned and checked before the seals come down. Nobody else needs to be in the work area, so please keep children and pets away.
- Tell us where the textured ceilings and walls are
- Each coating is sampled and tested
- We go through the options and send a quote
- The room is sealed, and the coating removed wet or the boards taken down
- The room is cleaned and the waste goes to a permitted site with paperwork
How to prepare
- Keep children and pets away on the day
- Dig out previous surveys
- Clear belongings, but leave the material alone
Getting a price
Include any existing survey or test when you send photos through our quote form, or phone 07833 053 749; it helps us quote accurately.
Read more
Choosing the right option
What are the options for Artex? Intact coatings with no work planned can often stay; if you want smooth ceilings or need to cut into it, removal is generally better. The cost of Artex removal depends on the job: the materials involved, how much there is, access and paperwork. Every quote is individual.
How we work in Birling Gap
- Identify first, remove only when needed
- Homes, rented property and workplaces
- Work done to the regulations
- Lab analysis by an accredited laboratory
Read how we quote and our cost guide.
Afterwards
Note which other rooms have coatings, for future work.
To avoid problems in future:
- Send photos of the coatings
- Book your plasterer after removal
- Each different coating needs testing
- Give us room sizes
Avoid these
Keep away from flaking or fallen coating and ask for advice.
Do not use a steamer or chemical stripper on an untested coating.
Materials we deal with
Coated plasterboard
The coating sits on plasterboard or plaster. Sometimes it’s simpler to remove the boards whole.
Patched areas
Patch repairs may use a different material from the original coating.
Birling Gap properties and textured coatings
Birling Gap is about 5 miles south-east of Seaford, in East Sussex. Birling Gap has a mix of older and newer buildings, and anything from before 2000 may contain asbestos. Birling Gap is one of 289 places in East Sussex we cover. We work right across the region, from Birling Gap to Brighton (16 miles away).
If your home is one of the older properties in Birling Gap, near The Parish Church of St Simon and St Jude or elsewhere, textured ceilings may date from an earlier renovation. Birling Gap is within about 5 miles of the South Downs National Park, and older rural homes there often have textured ceilings from past renovations. The coast is within about 5 miles of Birling Gap; indoor work like textured coating removal isn’t affected by the weather.
We cover Artex jobs across BN20. If your property is just outside Birling Gap, we also cover East Dean (1 mile north), Friston (1 mile north), Meads (3 miles east), Holywell (3 miles east) and Old Town (3 miles north-east). Further out, we also cover Eastbourne (5 miles north-east), Bexhill-on-Sea (14 miles north-east), Seaford (5 miles north-west), Lewes (13 miles north-west), Hailsham (9 miles north) and Newhaven (8 miles north-west).
Well-known places in the area include Eastbourne District General Hospital (4.1 miles north-east) and Rnli Eastbourne Lifeboat Museum (3.9 miles east). The countryside around Birling Gap includes Combe Hill.
Birling Gap: your questions answered
Do you cover small places like Birling Gap?
We do: small villages are covered too. Just tell us how to reach the property.
Do older homes in Birling Gap have asbestos?
It depends on its age and history: asbestos was used until the 1999 ban, so older homes and older alterations in Birling Gap can contain it. Look at garage roofs, textured ceilings, old floor tiles, soffits and flues.
What does it cost to remove Artex?
Room size, method and waste all affect the price. We quote once we know what it contains.
Does all Artex contain asbestos?
Not necessarily: plenty of textured coatings contain no asbestos. A sample test tells you which you have.
Should I check for asbestos before buying?
Yes. A pre-purchase survey tells you what’s there before you exchange, with the seller’s permission.
Can you quote from photos?
Clear photos and measurements are often enough; if not, we will arrange to see it.
Do you work in Birling Gap?
We do: Birling Gap is within the area we cover in East Sussex. Send the postcode and a few photos for a quote.
Can you come if the asbestos is damaged?
Keep people away from damaged material and do not clean it up yourself. Then contact us for advice.
What affects the price in Birling Gap
Every quote reflects:
- Travel and parking
- Access to the area
- Material and condition
- Waste quantity and disposal
Every quote says whether VAT is included, so you can compare like with like.
Helping us quote
A few photos can save a site visit:
- An overall view
- The access route
- A close-up from a safe distance
- Cracks or breaks
Share the postcode, a short description and photos: use our quote form or call 07833 053 749, and we’ll reply with a quote.
- Survey or test first when it isn’t clear what a material is
- Planned to HSE guidance and the Control of Asbestos Regulations 2012
- Everything in writing: quotes, reports, results and waste notes
- Legal disposal at a permitted site, with a consignment note