A surveyor in a respirator putting a sample of loft material into a sealed bag

East Sussex · England

Asbestos Artex Removal in Burwash Weald, East Sussex

Buildings in Burwash Weald built or refurbished before 2000 can contain asbestos. We offer textured coating testing and removal.

  • Structural work through coated ceilings
  • Coatings damaged by DIY
  • Loft conversions

Ask for a quote Ring 07833 053 749

Artex removal for Burwash Weald

The process

Our team wears protective equipment, and keep the room closed while we work. We will tell you when we have finished and what you’ll receive afterwards.

  1. Send photos of the textured surfaces
  2. We test a sample of each coating
  3. We explain your options: leave, cover or remove
  4. We remove it safely if that is what you choose
  5. The waste goes to a permitted site with a consignment note

Preparing for the visit

  • Keep the area clear of children and pets
  • Clear access to the area, loft or garage
  • Tell us about anything that is already damaged

How to get a quote

Unsure whether you need a test, a survey or removal? Use our quote form or call 07833 053 749, and we will advise.

Get a quote

Read more

Artex removal in Burwash Weald

Covering an intact coating is one option, but the asbestos is still there and should be recorded for future work. From loft conversions and extensions and walls before a kitchen or bathroom refit, we deal with coated ceiling roses, coated plasterboard and stipple finishes.

Village homes like those in Burwash Weald have often been altered several times, so ceilings may have been coated during an earlier renovation. Every quote is in writing and spells out what’s covered, so you know where you stand.

Location
Burwash Weald (TN19)
Region
East Sussex
What we do
Testing and removal of textured coatings
Paperwork
Test result and waste paperwork
Quote
Written quote for your job
Call
07833 053 749
Last updated
26 October 2026
A surveyor with a sample bag and scraper indoors

Prices and what affects them

Quotes vary because of:

  • Location, parking and any London charges
  • Licensed or non-licensed
  • Material and condition
  • Access to the area

Identifying asbestos early is cheaper than stopping work later, when the whole project can be held up.

Photos that help

When you send photos, these help most:

  • A closer photo of the material, without touching it
  • The route in: gates, steps, stairs or the loft hatch
  • Damaged areas
  • The parking area

Photos and a postcode help us quote quickly: use our quote form or call 07833 053 749.

Why people call us in Burwash Weald

Leaks and DIY can damage coatings, so they may start to flake.

If any of these sound familiar, it’s worth getting advice:

  • Loft conversions and extensions
  • Walls before a kitchen or bathroom refit
  • Coatings damaged by leaks
  • Rented flats before redecoration

Older homes across Burwash Weald may have coatings added during past renovations.

Comparing quotes

  • Any exclusions
  • Where the waste goes, with paperwork
  • Proof of an HSE licence where it’s needed
  • That samples are analysed by an accredited laboratory

Read the checklist

Your options compared

Strip the coating or take the boards down? Each has pros and cons, depending on the room. A price that looks too good to be true often is: proper controls, lab analysis and legal waste disposal cost money.

Why people choose us

  • No removal until we know what it is
  • Jobs planned to HSE guidance
  • Honest advice, even when the answer is to leave it
  • Waste taken to a permitted site with a consignment note

Take a look at our prices page and the cost guide.

Artex removal around Burwash Weald

Burwash Weald is about 9 miles south-east of Crowborough, in East Sussex. Burwash Weald is part of the area we cover, from older terraces and semis to flats, workplaces and outbuildings. We cover all 289 towns and villages across East Sussex. You can also see our page for Brighton, about 24 miles away.

If you’re refurbishing flats near Stonegate station, coatings can be tested while the flat is empty. Parts of the High Weald National Landscape are within about 2 miles of Burwash Weald, and older rural homes there often have textured ceilings from past renovations.

Here we cover the TN19 postcode area. Burwash Weald sits on or near the A265; tell us about parking if you are on a main road. Other places close to Burwash Weald we cover include Burwash Common (1 mile west), Burwash (2 miles north-east), Wood's Corner (3 miles south), Punnett's Town (3 miles south-west) and Dallington (3 miles south). Within a short drive, we also work in Eastbourne (14 miles south), Hastings (12 miles south-east), Bexhill-on-Sea (11 miles south-east), Hailsham (10 miles south-west), Crowborough (9 miles north-west) and St Leonards (12 miles south-east).

Well-known places in the area include Ticehurst House Hospital (4.5 miles north) and Old Castle (2.8 miles south).

  • Pubs nearby include The Wheel Inn (under half a mile south-west)
Map of Burwash Weald © OpenStreetMap contributors

The scope of Artex removal

It’s worth knowing what Artex removal does and doesn’t cover:

  • Larger-scale steam or gel removal must be notified before it starts, so allow time
  • The room being worked on has to be empty and sealed off
  • We leave the surface ready for your plasterer

If you are unsure, describe the job and send photos, and we will advise.

Materials in Burwash Weald

  • Coated plasterboard
  • Swirl and stipple patterns
  • Patched or painted coatings
  • Ceiling roses and cornices (coated)
  • Artex ceilings
  • Textured walls

More about this service

Responsibilities for owners

Letting agents often ask about asbestos before maintenance work. A test or survey gives a definite answer.

Contractors working for you need asbestos information before they start. HSE regularly reminds owners and trades of it.

Materials, one by one

Textured walls

Walls can have textured coatings too.

Painted coatings

We sample through the paint into the coating.

Should you do it yourself?

Fragile roofs are a serious falls risk, as well as an asbestos risk, so stay off it.

HSE advises the public not to repair or remove asbestos themselves. Higher-risk materials such as lagging, sprayed coatings and most insulating board must only be dealt with by an HSE-licensed contractor.

Common questions in Burwash Weald

Is asbestos common in Burwash Weald homes?

Any home in Burwash Weald built or refurbished before 2000 can contain asbestos, but only a test can confirm it. Look at garage roofs, textured ceilings, old floor tiles, soffits and flues.

Do you cover Burwash Weald and the area around Stonegate station?

Yes, we cover Burwash Weald and the area towards Stonegate station, about 2.2 miles north.

How dangerous is asbestos?

Asbestos is a hazard when its fibres get into the air. The related diseases often take decades to develop, so the aim is never to disturb it unknowingly.

How quickly can you come out?

We agree a date when you accept the quote. Some work has to be notified to the enforcing authority first, which affects timing.

Can you help a business or landlord?

Yes: homeowners, landlords, managing agents, businesses and contractors. Tell us about the property and what you need.

Can I sand my Artex ceiling smooth?

Not before testing. If it contains asbestos, sanding releases fibres.

Can you advise before I buy a property?

Yes. With the seller’s agreement, a pre-purchase survey tells you what’s there before you commit.

What if asbestos is found during building work?

Work there should pause and the area be kept clear. We can test the material and, if needed, plan its removal.

  • Nothing removed blind: unknown materials are tested first
  • Planned to HSE guidance and the Control of Asbestos Regulations 2012
  • Paperwork for your records: reports, lab results and consignment notes
  • Waste sealed and labelled, then taken to a permitted site

How it works · Licensed or non-licensed? · Get a quote