A surveyor in a respirator putting a sample of loft material into a sealed bag

Oxfordshire · England

Artex Removal for Caulcott

Artex removal in Caulcott: textured coating testing and removal, for homes, rented property and workplaces. Done to HSE guidance, with paperwork for your records.

  • Ceilings coming down
  • Textured walls before a refit
  • Coatings in the way of electrical work

Ask for a quote Call 07833 053 749

Asbestos help in Caulcott

Artex removal near Caulcott

According to HSE, textured coating work is normally non-licensed. Bigger jobs using steam or gel must be notified before they start. We often deal with textured walls, coated plasterboard and coated ceiling roses, and typical jobs are ceilings before skimming and loft conversions and extensions.

In places like Caulcott, textured ceilings appear in older and newer homes, often added during past renovations. We follow HSE guidance and the Control of Asbestos Regulations 2012.

Three workers in coveralls, full-face respirators and gloves lowering a cracked cement sheet into a heavy-duty waste bag behind barrier tape
Location
Caulcott (OX25)
Region
Oxfordshire
What we do
Textured ceilings and walls
Paperwork
Lab result and consignment note
Quotes
A written quote before work starts
Telephone
07833 053 749
Page updated
26 October 2026

Where asbestos turns up

Coatings get damaged by water leaks, cracks and DIY, which can make them crumble.

Get advice if you’re dealing with any of these:

  • Damaged or cracked coatings
  • Ceilings before skimming
  • Coatings already disturbed
  • Ceilings due for rewiring or new downlights

For rented flats close to Heyford station, a void period is a good time to deal with textured ceilings.

Comparing quotes

  • Waste disposal and the consignment note
  • How the work will be done, and the controls used
  • What’s excluded, such as making good or a new roof
  • Which areas and materials are covered

How to choose an asbestos contractor

After the job

Keep the test result and waste paperwork with your property records.

Staying safe afterwards:

  • Book your plasterer after removal
  • Give us room sizes
  • Keep pets away
  • Keep the results and paperwork

Avoid these

Plan testing before the renovation starts.

Hold off on drilling until you have a result.

Prices and what affects them

What changes the cost:

  • Whether the work is non-licensed, notifiable or licensed
  • How easy it is to reach
  • What the material is and its state
  • Waste quantity and disposal

Our quotes are clear about VAT, so you can compare like with like.

Photos that help

The most useful photos are:

  • Labels, if any
  • The route in: gates, steps, stairs or the loft hatch
  • A rough size or measurement
  • Street parking nearby

Photos from a safe distance help: send them through our contact page.

Artex removal around Caulcott

Caulcott is about 5 miles west of Bicester, in Oxfordshire. If your Artex job is in Caulcott, let us know about access. Caulcott is one of 443 places in Oxfordshire we cover. Our nearest city page is Oxford, about 11 miles away.

If your home is one of the older properties in Caulcott, near Heyford Park Chapel or elsewhere, textured ceilings may date from an earlier renovation.

Here we cover the OX25 postcode area, and your Artex job can be anywhere in it. From South Street, Lower Heyford Road and Greenway or a nearby road, the process is the same. If your property is just outside Caulcott, we also cover Upper Heyford (1 mile north), Lower Heyford (1 mile west), Middleton Stoney (2 miles east), Ardley (3 miles north-east) and Somerton (3 miles north). Within a short drive, we also work in Oxford (11 miles south), Banbury (11 miles north), Bicester (5 miles east), Witney (13 miles south-west), Kidlington (7 miles south) and Headington Quarry (11 miles south).

Well-known places in the area include Bicester Community Hospital (4.6 miles east) and Ardley Castle (2.7 miles north-east).

Map of Caulcott © OpenStreetMap contributors

How it works

We start by sealing and protecting the room, then keep the coating wet throughout. We begin by confirming exactly what we’re doing, so there is no confusion.

  1. Tell us which rooms and surfaces, and roughly how big they are
  2. We test the coating if it hasn’t been tested
  3. We plan the method and quote
  4. The room is sealed off and the coating removed wet, never sanded or dry-scraped
  5. The waste is bagged, the room cleaned and the waste taken to a permitted site

Getting ready

  • Leave the suspect material alone until we arrive
  • Keep children and pets away on the day
  • Let us know where we can park

Good to know

To be clear about the scope:

  • We need the room cleared
  • We test before removal, since a negative result changes everything
  • Larger-scale steam or gel removal must be notified before it starts, so allow time

If in doubt, ask: we’ll recommend a test, a survey or removal before booking.

Materials we see

  • Swirl and stipple patterns
  • Ceiling roses and cornices (coated)
  • Patched or painted coatings
  • Coated plasterboard
  • Textured walls
  • Artex ceilings

Read more about the service

Questions from Caulcott

Is asbestos common in Caulcott homes?

Homes built or refitted before 2000 can. The only way to know is to test suspect materials. Common places include garage roofs, textured ceilings, floor tiles, soffits and flues.

Do you cover Caulcott from London?

Caulcott is about 58 miles from central London, well within our area.

Can you advise before I buy a property?

Yes. With the seller’s agreement, a pre-purchase survey tells you what’s there before you commit.

Can I just skim over it?

You can, if it’s intact: covering it leaves it undisturbed. Do not sand it first, and keep a record that it’s there.

Is my textured ceiling in Caulcott asbestos?

Not necessarily: many coatings are asbestos-free. Testing a sample is how you find out.

What if the weather’s bad?

That depends: indoor work carries on, while outdoor roof work may be postponed in strong wind or heavy rain.

What if asbestos is found during building work?

Stop work in that area and keep people out, and the material needs identifying before work resumes.

When can you start?

We agree a date when you accept the quote. Notifiable jobs can’t start until they’ve been notified.

Your options compared

Strip the coating or take the boards down? Each has pros and cons, depending on the room. Very low prices can mean corners are being cut: controls, protective equipment, laboratory fees and legal disposal all cost money.

Why choose us

  • Covering London and the South East
  • Work done to the regulations
  • Reports and results you can share
  • Houses, flats and business premises

See how we quote and our cost guide.

Can I do it myself?

Asbestos waste can’t go in household bins, recycling or skips. It has to go to a site that accepts it, and some councils accept small amounts from residents by arrangement.

Power tools, sanding and jet-washing release the most fibres, so avoid them completely.

Materials, one by one

Coated plasterboard

The coating sits on plasterboard or plaster. Sometimes it’s simpler to remove the boards whole.

Artex ceilings

A small sample from each different coating tells you whether it contains asbestos.

  • Survey or test first when it isn’t clear what a material is
  • Done to the regulations: HSE guidance and CAR 2012
  • Written paperwork: reports, results and waste consignment notes
  • Asbestos waste double-bagged or wrapped and taken to a permitted site

How it works · Licensed or non-licensed? · Get a quote