A surveyor in a respirator putting a sample of loft material into a sealed bag

Isle of Wight · England

Artex Removal in Cranmore

Looking for Artex removal in Cranmore? We work across Cranmore and the towns around it, with clear advice and a written quote.

  • Ceilings due for rewiring or new downlights
  • Coatings damaged by leaks
  • Coatings damaged by DIY

Request a quote Call 07833 053 749

Artex removal near Cranmore

Cranmore properties and textured coatings

Cranmore is about 6 miles south-east of Lymington, in the Isle of Wight. Homes, landlords and businesses in Cranmore contact us for Artex jobs about all kinds of jobs. Cranmore is one of 125 places in the Isle of Wight where we work. You can also see our page for Southampton, about 14 miles away.

For rented flats close to Lymington Pier station, a void period is a good time to deal with textured ceilings. The coast is within about 5 miles of Cranmore, though indoor coating work goes ahead whatever the weather.

This part of the Isle of Wight takes in PO41. Local streets include Solent Road, East Close and Cranmore Avenue; we cover every one. For properties just outside Cranmore, we cover Hamstead (1 mile north-east), Shalfleet (1 mile south-east), Bouldnor (1 mile west), Yarmouth (2 miles west) and Thorns Beach (4 miles north). Larger places within reach include Newport (6 miles east), Ryde (12 miles east), Cowes (7 miles north-east), Sandown (13 miles east), Shanklin (13 miles south-east) and Ventnor (13 miles south-east). Some remote sites need extra planning, so contact us in good time.

For somewhere as remote as Cranmore, early notice helps us plan the trip.

Nearby you will also find Calbourne Water Mill And Rural Museum (2.6 miles south-east) and Yarmouth Castle (2.4 miles west). Within reach you will find Boldre Foreshore and Compton Down.

Map of Cranmore © OpenStreetMap contributors

About our artex removal in Cranmore

Skimming or boarding over an intact coating avoids disturbing it, but the asbestos is still there and should be recorded for future work. From coatings scraped during DIY and walls before tiling, we deal with textured walls, coated ceiling roses and stipple finishes.

In towns and villages like Cranmore, textured ceilings appear in older and newer homes. Nothing is removed until it’s been identified, because the method depends on what the material is.

Area
Cranmore (PO41)
Region
Isle of Wight
What we do
Testing and removal of textured coatings
You receive
Result and waste note
Quotes
Quoted individually, in writing
Call
07833 053 749
Last updated
26 October 2026
A surveyor in a respirator and gloves making notes on a tablet in a utility room

What it costs

Quotes vary because of:

  • The type of material and its condition
  • Location, parking and any London charges
  • How much there is
  • How many samples are needed

How easy the material is to reach affects the price, so tell us about access.

Photos that help

The most useful photos are:

  • How we’d reach it
  • A close-up from a safe distance
  • Labels, if any
  • A rough size or measurement

You’ll get a written quote. Just fill in the enquiry form or give us a call on 07833 053 749 with the details.

Limits to be aware of

We’re upfront about what’s included:

  • We test before removal, because a clear result means ordinary methods can be used
  • Other materials may need their own approach
  • We need the room cleared

If you are unsure, describe the job and send photos, and we will advise before booking.

Materials we see

  • Ceiling roses and cornices (coated)
  • Coated plasterboard
  • Swirl and stipple patterns
  • Patched or painted coatings
  • Artex ceilings
  • Textured walls

Read more about the service

Common reasons for Artex jobs in Cranmore

Asbestos-free coatings were also made, so testing is the only way to know.

Common situations in older properties include:

  • Coatings damaged by DIY
  • Coatings damaged by leaks
  • Ceilings due for plastering or skimming
  • Walls before a kitchen or bathroom refit

A school like Shalfleet Church of England Primary School should know from its asbestos register whether coatings have been tested.

Comparing quotes

  • Waste disposal and the consignment note
  • The documents you will receive
  • Whether the job needs notifying
  • What’s excluded, such as making good or a new roof

What to check before booking

Responsibilities for owners

Landlords of single homes do not have the same duty to manage as non-domestic duty holders, but contractors still need to know about asbestos before they work.

If you own a block of garages or outbuildings that you let should find out whether the roofs are asbestos cement, before repairs are arranged.

Your options compared

Remove the coating, or the whole ceiling? Each has pros and cons, depending on the room. There is no one-size price, as every job differs. Our guides list published price ranges from other companies, with sources.

Why people choose us

  • Quotes that spell out the scope
  • London, Kent, Surrey, Sussex and beyond
  • Records for your files
  • Clear advice on your options

Read how we price jobs or our cost guide.

FAQs for Cranmore

Is asbestos common in Cranmore homes?

Older homes can, if they date from before 2000. The only way to know is to test suspect materials. Look at garage roofs, textured ceilings, old floor tiles, soffits and flues.

Do textured ceilings in Cranmore homes contain asbestos?

Some older coatings do, and many do not. Only a test will tell you.

Can I just skim over it?

Covering it is an option if it’s intact, but do not sand it first, and record that it’s there.

When can you start?

That depends on the work and current bookings. We will give you dates when we quote.

Do you give written quotes?

Always: the quote is in writing and sets out what’s included, and whether VAT is included.

I think I’ve damaged asbestos. What now?

Stop work, leave the area and do not try to clean up. Then get advice.

Do you need a licence to remove Artex?

Normally not: HSE treats textured coating work as normally non-licensed, though large steam or gel jobs are notifiable.

What’s the difference between a test and a survey?

A test checks specific materials; a survey checks a whole building or work area. For building work, a survey is typically needed.

Materials, one by one

Patched areas

Patch repairs may use a different material from the original coating.

Artex ceilings

We test each different coating.

The process

At the end, the room is cleaned and checked. It helps if we can park nearby, so let us know about any restrictions.

  1. Get in touch with photos
  2. We test a sample of each coating
  3. We talk through the options
  4. We remove it safely if that is what you choose
  5. The waste goes to a permitted site with a consignment note

Getting ready

  • Tell us about anything that is already damaged
  • Have any previous surveys or test results ready
  • Keep children and pets away on the day

Getting a price

We quote each job individually, because no two are the same. To start, use our quote form or call 07833 053 749.

Tell us what you need

Helpful guides

After the job

Note which other rooms have coatings, so future work is planned properly.

After we’ve finished:

  • Line up the plasterer for afterwards
  • Keep the results and paperwork
  • Keep pets away
  • Give us room sizes

Avoid these

Test before the builders arrive.

Keep away from flaking or fallen coating and ask for advice.

  • Identify it first: we test or survey before planning removal
  • Planned to HSE guidance and the Control of Asbestos Regulations 2012
  • Everything in writing: quotes, reports, results and waste notes
  • Asbestos waste double-bagged or wrapped and taken to a permitted site

How it works · Licensed or non-licensed? · Get a quote