Hampshire · England
Artex Removal in Thorns Beach
Buildings in Thorns Beach built or refurbished before 2000 can contain asbestos. We offer Artex removal, with testing first.
- Textured walls before a refit
- Ceilings before plastering
- Rented flats before redecoration
Artex removal for Thorns Beach
Which option is right?
Plastering over it is an option, but never sand it first, and the asbestos stays in the building. Our quotes are clear about VAT, so you can compare like with like.
Why us?
- Jobs planned to HSE guidance
- We identify first and remove only what needs removing
- Across London and the South East
- Clear advice on your options
Read our prices page and the cost guide.
Artex removal for Thorns Beach properties
If your renovation in Thorns Beach involves textured ceilings, test them before rewiring, fitting downlights or plastering. Common materials are swirl patterns, Artex ceilings and textured walls, and typical jobs are textured walls before a refit and structural work through coated ceilings.
In a village like Thorns Beach, textured coatings turn up in cottages and later homes alike, often added during past renovations. We follow HSE guidance and the Control of Asbestos Regulations 2012, whatever the size of the job.
- Area
- Thorns Beach (SO42)
- Area hub
- Hampshire
- Service
- Artex tested, then removed with wet methods
- Afterwards
- Result and waste note
- Quote
- Quoted individually, in writing
- Call
- 07833 053 749
- Page updated
- 26 October 2026
Landlords, managing agents and employers
Letting agents often ask about asbestos before maintenance work. A test or a survey gives everyone a clear answer.
For managing agents and freeholders in Thorns Beach, the register for shared areas needs keeping current and sharing with trades, and condition checked regularly.
Artex removal around Thorns Beach
Thorns Beach is about 5 miles east of Lymington, in Hampshire. We work across Thorns Beach and the surrounding area, on everything from houses and flats to workplaces and garages. We work in all 683 towns and villages in Hampshire. Our area stretches from Thorns Beach to Southampton (about 11 miles away).
Parts of the New Forest National Park are within about 4 miles of Thorns Beach, and older rural homes there often have textured ceilings from past renovations. The coast is within about 5 miles of Thorns Beach, though indoor coating work goes ahead whatever the weather.
Artex jobs anywhere in SO42 start with the postcode and some photos. If your property is just outside Thorns Beach, we also cover East End (2 miles west), Norleywood (3 miles west), Hamstead (3 miles south), Cranmore (4 miles south) and Bouldnor (4 miles south). We also cover nearby towns such as Gosport (13 miles east), Eastleigh (15 miles north), Fareham (12 miles north-east), Totton (11 miles north), Chandler's Ford (15 miles north) and Hedge End (12 miles north-east).
Well-known places in the area include Yarmouth Castle (4.8 miles south-west) and Beaulieu Abbey And Display Of Monastic Life (4 miles north). Within reach you’ll find Boldre Foreshore.
Materials, one by one
Coated plasterboard
Coatings are applied over plasterboard or plaster. Sometimes it’s simpler to remove the boards whole.
Painted coatings
The sample includes the coating itself.
Looking after things afterwards
After removal, the room is cleaned and the waste goes to a permitted site, with a consignment note.
After the job, keep these in mind:
- Book your plasterer after removal
- Photos help us quote
- Keep the results and paperwork
- Keep pets out of the work area
Don’ts
Don’t sand, scrape dry or wire-brush a textured coating before it’s been tested.
Test before the builders arrive.
Questions from Thorns Beach
Do textured ceilings in Thorns Beach homes contain asbestos?
Some may, but many coatings don’t contain asbestos. Testing a sample is the only way to know.
Do you cover Thorns Beach and the area around Lymington Pier station?
Yes. Lymington Pier station is about 3.9 miles west of Thorns Beach, and we cover both.
Could my home contain asbestos?
You can’t tell by eye. A sample analysed in a laboratory is the reliable way to find out, and anything from before 2000 is worth checking.
What does licensed work mean?
Higher-risk materials need an HSE-licensed contractor. Most asbestos cement and textured coatings are non-licensed or notifiable non-licensed.
I think I’ve damaged asbestos. What now?
Stop work, leave the area and do not try to clean up. Then ask for advice; if you’re worried about your health, speak to your GP.
What if my house is newer?
Buildings from after 2000 shouldn’t, because of the 1999 ban, but older parts and reused materials can still contain it.
Can I plaster over Artex that contains asbestos?
Covering it is an option if it’s intact, but don’t sand it first, and record that it’s there.
My builder has found asbestos. What now?
Stop work in that area and keep people out, and the material needs identifying before work resumes.
How we work
We soften the coating and take it off by hand, never sanded or scraped dry. Before anything starts, we confirm the areas and materials with you, so there’s no confusion.
- Send photos of the textured surfaces
- We test a sample of each coating
- We talk through the options
- We remove it safely if that is what you choose
- The waste goes to a permitted site with a consignment note
How to prepare
- Mention any parking restrictions
- Do not disturb the material before we get there
- Have any previous surveys or test results ready
Ask for a quote
Tell us about the material, its location and your plans. Call 07833 053 749 or use our quote form.
Helpful guides
Typical Artex jobs in Thorns Beach
Asbestos-free coatings were also made, so a textured ceiling is not automatically asbestos.
You cannot tell by looking, but these are common reasons people contact us:
- Extensions that cut into ceilings
- Rented homes refurbished between tenants
- Flaking textured ceilings
- Ceilings before downlights go in
If you’re refurbishing flats near Lymington Pier station, textured ceilings can be tested between tenancies.
Comparing quotes
- What you’ll receive afterwards: a report, results or waste paperwork
- Whether the work is licensed, notifiable non-licensed or non-licensed
- Any exclusions
- Suitable insurance for the work
Also in Thorns Beach
The scope of Artex removal
Every job has limits; these are the usual ones:
- We test before removal, because a clear result means ordinary methods can be used
- Big jobs need notifying in advance, which affects the start date
- Other materials may need their own approach
If in doubt, ask: we will recommend a test, a survey or removal.
Materials in Thorns Beach
- Ceiling roses and cornices (coated)
- Artex ceilings
- Coated plasterboard
- Swirl and stipple patterns
- Patched or painted coatings
- Textured walls
Should you do it yourself?
Found something mid-DIY? Stop: leave the area, don’t clean it up, and ask for advice.
With a professional job, you get a record: results, a report or a consignment note, which buyers and builders may ask for.
- Identify it first: we test or survey before planning removal
- Done to the regulations: HSE guidance and CAR 2012
- Paperwork for your records: reports, lab results and consignment notes
- Waste sealed and labelled, then taken to a permitted site